From: Gregory Herrero <gregory.herrero@xxxxxxxxx>
port resume sequence may be used in different places. Create a
function to handle it. Make hprt0 read-modify-write atomic and
clear HPRT0_SUSP for both writes as it is a "read, write-set,
and self-clear (R_WS_SC)" bit. Since the lock is released
between the writes, read hprt0 again.
Since the phy clock is stopped in dwc2_port_suspend(), enable it
here and remove the PCGCTL write from dwc2_hcd_hub_control()
Signed-off-by: Gregory Herrero <gregory.herrero@xxxxxxxxx>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@xxxxxxxxx>
Tested-by: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
---
drivers/usb/dwc2/hcd.c | 40 ++++++++++++++++++++++++++++++----------
1 file changed, 30 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 1595d70..b929087 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1484,6 +1484,35 @@ static void dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
}
}
+/* Must NOT be called with interrupt disabled or spinlock held */
+static void dwc2_port_resume(struct dwc2_hsotg *hsotg)
+{
+ unsigned long flags;
+ u32 hprt0;
+ u32 pcgctl;
+
+ /* Resume the Phy Clock */
+ pcgctl = dwc2_readl(hsotg->regs + PCGCTL);
+ pcgctl &= ~PCGCTL_STOPPCLK;
+ dwc2_writel(pcgctl, hsotg->regs + PCGCTL);
+ usleep_range(20000, 40000);
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+ hprt0 = dwc2_read_hprt0(hsotg);
+ hprt0 |= HPRT0_RES;
+ hprt0 &= ~HPRT0_SUSP;
+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ msleep(USB_RESUME_TIMEOUT);
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+ hprt0 = dwc2_read_hprt0(hsotg);
+ hprt0 &= ~(HPRT0_RES | HPRT0_SUSP);
+ dwc2_writel(hprt0, hsotg->regs + HPRT0);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+}
+
/* Handles hub class-specific requests */
static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
u16 wvalue, u16 windex, char *buf, u16 wlength)
@@ -1529,17 +1558,8 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
case USB_PORT_FEAT_SUSPEND:
dev_dbg(hsotg->dev,
"ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
- dwc2_writel(0, hsotg->regs + PCGCTL);
- usleep_range(20000, 40000);
- hprt0 = dwc2_read_hprt0(hsotg);
- hprt0 |= HPRT0_RES;
- dwc2_writel(hprt0, hsotg->regs + HPRT0);
- hprt0 &= ~HPRT0_SUSP;
- msleep(USB_RESUME_TIMEOUT);
-
- hprt0 &= ~HPRT0_RES;
- dwc2_writel(hprt0, hsotg->regs + HPRT0);
+ dwc2_port_resume(hsotg);
break;
case USB_PORT_FEAT_POWER:
--
2.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
