For imx27, it needs three clocks to let the controller work,
the old code is wrong, and will cause below data abort when
accass usbmisc registers.
usbcore: registered new interface driver usb-storage
Unhandled fault: external abort on non-linefetch (0x008) at 0xf4424600
pgd = c0004000
[f4424600] *pgd=10000452(bad)
Internal error: : 8 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-next-20150701-dirty #3089
Hardware name: Freescale i.MX27 (Device Tree Support)
task: c7832b60 ti: c783e000 task.ti: c783e000
PC is at usbmisc_imx27_init+0x4c/0xbc
LR is at usbmisc_imx27_init+0x40/0xbc
pc : [<c03cb5c0>] lr : [<c03cb5b4>] psr: 60000093
sp : c783fe08 ip : 00000000 fp : 00000000
r10: c0576434 r9 : 0000009c r8 : c7a773a0
r7 : 01000000 r6 : 60000013 r5 : c7a776f0 r4 : c7a773f0
r3 : f4424600 r2 : 00000000 r1 : 00000001 r0 : 00000001
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 0005317f Table: a0004000 DAC: 00000017
Process swapper (pid: 1, stack limit = 0xc783e190)
Stack: (0xc783fe08 to 0xc7840000)
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Reported-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx27.dtsi | 19 +++++++++++++++----
1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index feb9d34..93e3e14 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -486,7 +486,11 @@
compatible = "fsl,imx27-usb";
reg = <0x10024000 0x200>;
interrupts = <56>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ need-three-clocks;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 0>;
status = "disabled";
};
@@ -495,7 +499,11 @@
compatible = "fsl,imx27-usb";
reg = <0x10024200 0x200>;
interrupts = <54>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ need-three-clocks;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 1>;
dr_mode = "host";
status = "disabled";
@@ -505,7 +513,11 @@
compatible = "fsl,imx27-usb";
reg = <0x10024400 0x200>;
interrupts = <55>;
- clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+ need-three-clocks;
+ clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+ <&clks IMX27_CLK_USB_AHB_GATE>,
+ <&clks IMX27_CLK_USB_DIV>;
+ clock-names = "ipg", "ahb", "per";
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
status = "disabled";
@@ -515,7 +527,6 @@
#index-cells = <1>;
compatible = "fsl,imx27-usbmisc";
reg = <0x10024600 0x200>;
- clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
};
sahara2: sahara@10025000 {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
