From: Gregory Herrero <gregory.herrero@xxxxxxxxx>
Some device may have external id pin control enabled, so op_state
will not be set on id pin interrupt change.
Thus, ensure op_state is set to peripheral during vbus detection.
Signed-off-by: Gregory Herrero <gregory.herrero@xxxxxxxxx>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@xxxxxxxxx>
Tested-by: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
---
drivers/usb/dwc2/gadget.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index a50962e..8783af8 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3209,6 +3209,7 @@ static int dwc2_hsotg_vbus_session(struct usb_gadget *gadget, int is_active)
spin_lock_irqsave(&hsotg->lock, flags);
if (is_active) {
+ hsotg->op_state = OTG_STATE_B_PERIPHERAL;
/*
* If controller is hibernated, it must exit from hibernation
* before being initialized
--
2.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
