On 9/4/2015 3:58 AM, Joao Pinto wrote: > When testing the Synopsys DWC USB 3.0 Device IP, Compliant Tests are run > for USB 3.0 and USB 2.0. An issue was found regarding the USB 2.0 CV > Chapter 9 test: LPM L1 Suspend Resume Test. For it to be successful it > is necessary to add besl support to the gadget driver and set the deep > besl and baseline besl values. > > Signed-off-by: Joao Pinto <jpinto@xxxxxxxxxxxx> > Tested-by: Joao Pinto <jpinto@xxxxxxxxxxxx> > --- > drivers/usb/gadget/composite.c | 12 +++++++++++- > 1 file changed, 11 insertions(+), 1 deletion(-) > > diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c > index b474499..e907578 100644 > --- a/drivers/usb/gadget/composite.c > +++ b/drivers/usb/gadget/composite.c > @@ -567,7 +567,14 @@ static int bos_desc(struct usb_composite_dev *cdev) > usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE; > usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY; > usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT; > - usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT | USB_BESL_SUPPORT); > + usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT | > + USB_BESL_SUPPORT | > + USB_BESL_BASELINE_VALID | > + USB_BESL_DEEP_VALID); > + > + usb_ext->bmAttributes &= cpu_to_le32(~(0x00f00 | 0x0f000)); > + usb_ext->bmAttributes |= cpu_to_le32(4 << 8); > + usb_ext->bmAttributes |= cpu_to_le32(5 << 12); > > /* > * The Superspeed USB Capability descriptor shall be implemented by all > Hi Joao, These values should only apply to certain platforms. We can discuss off-list. Regards, John -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
