Re: [PATCH v4 9/9] usb: dwc3: core: don't break during suspend/resume while we're dual-role

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/09/15 20:22, Sergei Shtylyov wrote:
> Hello.
> 
> On 09/02/2015 05:24 PM, Roger Quadros wrote:
> 
>> We can't rely just on dr_mode to decide if we're in host or gadget
>> mode when we're configured as otg/dual-role. So while dr_mode is
>> OTG, we find out from  the otg state machine if we're in host
>> or gadget mode and take the necessary actions during suspend/resume.
>>
>> Also make sure that we disable OTG irq and events during system suspend
>> so that we don't lockup the system during system suspend/resume.
>>
>> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
>> ---
>>   drivers/usb/dwc3/core.c | 27 +++++++++------------------
>>   1 file changed, 9 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>> index 654aebf..25891e3 100644
>> --- a/drivers/usb/dwc3/core.c
>> +++ b/drivers/usb/dwc3/core.c
>> @@ -1455,18 +1455,15 @@ static int dwc3_suspend(struct device *dev)
>>           dwc->octl = dwc3_readl(dwc->regs, DWC3_OCTL);
>>           dwc->oevt = dwc3_readl(dwc->regs, DWC3_OEVT);
>>           dwc->oevten = dwc3_readl(dwc->regs, DWC3_OEVTEN);
>> +        dwc3_writel(dwc->regs, DWC3_OEVTEN, 0);
>> +        disable_irq(dwc->otg_irq);
>>       }
>>
>> -    switch (dwc->dr_mode) {
>> -    case USB_DR_MODE_PERIPHERAL:
>> -    case USB_DR_MODE_OTG:
>> +    if (dwc->dr_mode == USB_DR_MODE_PERIPHERAL ||
>> +        ((dwc->dr_mode == USB_DR_MODE_OTG) && (dwc->fsm->protocol == PROTO_GADGET)))
> 
>    Hm, you're not very consistent about your parens. :-)

You're right. Should be

if ((dwc->dr_mode == USB_DR_MODE_PERIPHERAL) ||
    ((dwc->dr_mode == USB_DR_MODE_OTG) && (dwc->fsm->protocol == PROTO_GADGET)))


> 
> [...]
>> @@ -1506,18 +1503,12 @@ static int dwc3_resume(struct device *dev)
>>           dwc3_writel(dwc->regs, DWC3_OCTL, dwc->octl);
>>           dwc3_writel(dwc->regs, DWC3_OEVT, dwc->oevt);
>>           dwc3_writel(dwc->regs, DWC3_OEVTEN, dwc->oevten);
>> +        enable_irq(dwc->otg_irq);
>>       }
>>
>> -    switch (dwc->dr_mode) {
>> -    case USB_DR_MODE_PERIPHERAL:
>> -    case USB_DR_MODE_OTG:
>> +    if (dwc->dr_mode == USB_DR_MODE_PERIPHERAL ||
>> +        ((dwc->dr_mode == USB_DR_MODE_OTG) && (dwc->fsm->protocol == PROTO_GADGET)))
> 
>    Same here...

--
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux