From: Gregory Herrero <gregory.herrero@xxxxxxxxx>
idstschng interrupt should not be used when id pin control is
external. This is already handled on dwc2 host part. Fix it on gadget
part as well.
Signed-off-by: Gregory Herrero <gregory.herrero@xxxxxxxxx>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@xxxxxxxxx>
---
drivers/usb/dwc2/gadget.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 60609fb..1f11b50 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2285,6 +2285,7 @@ static int dwc2_hsotg_corereset(struct dwc2_hsotg *hsotg)
void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
bool is_usb_reset)
{
+ u32 intmsk;
u32 val;
/* Kill any ep0 requests as controller will be reinitialized */
@@ -2316,14 +2317,16 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
/* Clear any pending interrupts */
writel(0xffffffff, hsotg->regs + GINTSTS);
-
- writel(GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT |
+ intmsk = GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT |
GINTSTS_GOUTNAKEFF | GINTSTS_GINNAKEFF |
- GINTSTS_CONIDSTSCHNG | GINTSTS_USBRST |
- GINTSTS_RESETDET | GINTSTS_ENUMDONE |
- GINTSTS_OTGINT | GINTSTS_USBSUSP |
- GINTSTS_WKUPINT,
- hsotg->regs + GINTMSK);
+ GINTSTS_USBRST | GINTSTS_RESETDET |
+ GINTSTS_ENUMDONE | GINTSTS_OTGINT |
+ GINTSTS_USBSUSP | GINTSTS_WKUPINT;
+
+ if (hsotg->core_params->external_id_pin_ctl <= 0)
+ intmsk |= GINTSTS_CONIDSTSCHNG;
+
+ writel(intmsk, hsotg->regs + GINTMSK);
if (using_dma(hsotg))
writel(GAHBCFG_GLBL_INTR_EN | GAHBCFG_DMA_EN |
--
2.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
