add xHCI and phy drivers for MT8173-EVB
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 16 +++++++++++
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 44 +++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index f433c21..112f3f3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -13,6 +13,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "mt8173.dtsi"
/ {
@@ -32,6 +33,15 @@
};
chosen { };
+
+ usb_p1_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 130 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
&pwrap {
@@ -211,3 +221,9 @@
&uart0 {
status = "okay";
};
+
+&usb30 {
+ vusb33-supply = <&mt6397_vusb_reg>;
+ vbus-supply = <&usb_p1_vbus>;
+ mediatek,wakeup-src = <1>;
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 0696f8f..f88b2f9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -14,6 +14,8 @@
#include <dt-bindings/clock/mt8173-clk.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mt8173-power.h>
#include <dt-bindings/reset-controller/mt8173-resets.h>
#include "mt8173-pinfunc.h"
@@ -393,6 +395,48 @@
#size-cells = <0>;
status = "disabled";
};
+
+ usb30: usb@11270000 {
+ compatible = "mediatek,mt8173-xhci";
+ reg = <0 0x11270000 0 0x4000>,
+ <0 0x11280000 0 0x0800>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>,
+ <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB1>;
+ clock-names = "sys_ck",
+ "wakeup_deb_p0",
+ "wakeup_deb_p1";
+ phys = <&phy_port0 PHY_TYPE_USB3>,
+ <&phy_port1 PHY_TYPE_USB2>;
+ usb3-lpm-capable;
+ mediatek,syscon-wakeup = <&pericfg>;
+ status = "okay";
+ };
+
+ u3phy: usb-phy@11290000 {
+ compatible = "mediatek,mt8173-u3phy";
+ reg = <0 0x11290000 0 0x800>;
+ clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+ clock-names = "u3phya_ref";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "okay";
+
+ phy_port0: port@11290800 {
+ reg = <0 0x11290800 0 0x800>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ phy_port1: port@11291000 {
+ reg = <0 0x11291000 0 0x800>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
};
};
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
