Add workqueue to add/remove host driver (outside interrupt context) upon each id change. Signed-off-by: Li Yang <leoli@xxxxxxxxxxxxx> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx> --- Changes for v3: - removed CONFIG_FSL_USB2_OTG and CONFIG_FSL_USB2_OTG_MODULE macros - removed call to usb_hcd_resume_root_hub(hcd) from ehci_fsl_drv_resume() drivers/usb/host/ehci-fsl.c | 71 ++++++++++++++++++++++++++++++++------------- drivers/usb/host/ehci-fsl.h | 18 ++++++++++++ 2 files changed, 69 insertions(+), 20 deletions(-) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 202dafb..ef04c5a 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -44,6 +44,31 @@ static struct hc_driver __read_mostly fsl_ehci_hc_driver; +static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd) +{ + return (struct ehci_fsl *)hcd_to_ehci(hcd)->priv; +} + +static void do_change_hcd(struct work_struct *work) +{ + struct ehci_fsl *ehci_fsl = container_of(work, struct ehci_fsl, + change_hcd_work); + struct usb_hcd *hcd = ehci_fsl->hcd; + void __iomem *non_ehci = hcd->regs; + int retval; + + if (ehci_fsl->hcd_add && !ehci_fsl->have_hcd) { + writel(USBMODE_CM_HOST, non_ehci + FSL_SOC_USB_USBMODE); + /* host, gadget and otg share same int line */ + retval = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); + if (retval == 0) + ehci_fsl->have_hcd = 1; + } else if (!ehci_fsl->hcd_add && ehci_fsl->have_hcd) { + usb_remove_hcd(hcd); + ehci_fsl->have_hcd = 0; + } +} + /* configure so an HC device and id are always provided */ /* always called with process context; sleeping is OK */ @@ -147,11 +172,15 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev) goto err2; device_wakeup_enable(hcd->self.controller); -#ifdef CONFIG_USB_OTG if (pdata->operating_mode == FSL_USB2_DR_OTG) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); + ehci_fsl->hcd = hcd; hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2); + + INIT_WORK(&ehci_fsl->change_hcd_work, do_change_hcd); + dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n", hcd, ehci, hcd->usb_phy); @@ -168,7 +197,7 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev) goto err2; } } -#endif + return retval; err2: @@ -371,15 +400,6 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) return retval; } -struct ehci_fsl { - struct ehci_hcd ehci; - -#ifdef CONFIG_PM - /* Saved USB PHY settings, need to restore after deep sleep. */ - u32 usb_ctrl; -#endif -}; - #ifdef CONFIG_PM #ifdef CONFIG_PPC_MPC512x @@ -527,24 +547,26 @@ static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev) } #endif /* CONFIG_PPC_MPC512x */ -static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - - return container_of(ehci, struct ehci_fsl, ehci); -} - static int ehci_fsl_drv_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); void __iomem *non_ehci = hcd->regs; + struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); + struct usb_bus host = hcd->self; if (of_device_is_compatible(dev->parent->of_node, "fsl,mpc5121-usb2-dr")) { return ehci_fsl_mpc512x_drv_suspend(dev); } + if (host.is_otg) { + /* remove hcd */ + ehci_fsl->hcd_add = 0; + schedule_work(&ehci_fsl->change_hcd_work); + host.is_otg = 0; + return 0; + } + ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), device_may_wakeup(dev)); if (!fsl_deep_sleep()) @@ -557,15 +579,24 @@ static int ehci_fsl_drv_suspend(struct device *dev) static int ehci_fsl_drv_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); - struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); struct ehci_hcd *ehci = hcd_to_ehci(hcd); void __iomem *non_ehci = hcd->regs; + struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); + struct usb_bus host = hcd->self; if (of_device_is_compatible(dev->parent->of_node, "fsl,mpc5121-usb2-dr")) { return ehci_fsl_mpc512x_drv_resume(dev); } + if (host.is_otg) { + /* add hcd */ + ehci_fsl->hcd_add = 1; + schedule_work(&ehci_fsl->change_hcd_work); + host.is_otg = 0; + return 0; + } + ehci_prepare_ports_for_controller_resume(ehci); if (!fsl_deep_sleep()) return 0; diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index 1a8a60a..7c46725 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -63,4 +63,22 @@ #define UTMI_PHY_EN (1<<9) #define ULPI_PHY_CLK_SEL (1<<10) #define PHY_CLK_VALID (1<<17) + +struct ehci_fsl { +#ifdef CONFIG_PM + /* Saved USB PHY settings, need to restore after deep sleep. */ + u32 usb_ctrl; +#endif + struct usb_hcd *hcd; + struct work_struct change_hcd_work; + /* + * store current hcd state for otg; + * have_hcd is true when host drv al already part of otg framework, + * otherwise false; + * hcd_add is true when otg framework wants to add host + * drv as part of otg;flase when it wants to remove it + */ + unsigned have_hcd:1; + unsigned hcd_add:1; +}; #endif /* _EHCI_FSL_H */ -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html