The xhci platform driver needs to work on systems that
either only support 64-bit DMA or only support 32-bit DMA.
Attempt to set a coherent dma mask for 64-bit DMA, and
attempt again with 32-bit DMA if that fails.
[dhdang: regenerate the patch over 4.2-rc5]
Signed-off-by: Mark Langsdorf <mlangsdo@xxxxxxxxxx>
Tested-by: Mark Salter <msalter@xxxxxxxxxx>
Signed-off-by: Duc Dang <dhdang@xxxxxxx>
---
Changes from v3:
Re-generate the patch over 4.2-rc5
No code change.
Changes from v2:
None
Changes from v1:
Consolidated to use dma_set_mask_and_coherent
Got rid of the check against sizeof(dma_addr_t)
drivers/usb/host/xhci-plat.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 890ad9d..5d03f8b 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -93,14 +93,14 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (irq < 0)
return -ENODEV;
- /* Initialize dma_mask and coherent_dma_mask to 32-bits */
- ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (ret)
- return ret;
- if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
- else
- dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ /* Try setting the coherent_dma_mask to 64 bits, then try 32 bits */
+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (ret) {
+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
+ }
+
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
