With this setting and AHBBRST at SBUSCFG as "Incremental burst of
unspecified length", each non-burst size can be taken as single
transfer. It is benefit for non-burst size transfer.
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
---
drivers/usb/chipidea/usbmisc_imx.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 3cefd49..5ddab30 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -54,6 +54,7 @@
#define MX53_USB_PHYCTRL1_PLLDIV_MASK 0x3
#define MX53_USB_PLL_DIV_24_MHZ 0x01
+#define MX6_BM_NON_BURST_SETTING BIT(1)
#define MX6_BM_OVER_CUR_DIS BIT(7)
#define MX6_BM_WAKEUP_ENABLE BIT(10)
#define MX6_BM_ID_WAKEUP BIT(16)
@@ -255,14 +256,21 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
if (data->index > 3)
return -EINVAL;
+ spin_lock_irqsave(&usbmisc->lock, flags);
+
if (data->disable_oc) {
- spin_lock_irqsave(&usbmisc->lock, flags);
reg = readl(usbmisc->base + data->index * 4);
writel(reg | MX6_BM_OVER_CUR_DIS,
usbmisc->base + data->index * 4);
- spin_unlock_irqrestore(&usbmisc->lock, flags);
}
+ /* SoC non-burst setting */
+ reg = readl(usbmisc->base + data->index * 4);
+ writel(reg | MX6_BM_NON_BURST_SETTING,
+ usbmisc->base + data->index * 4);
+
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+
usbmisc_imx6q_set_wakeup(data, false);
return 0;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
