Rework ep_matches() function to make it shorter and more readable.
Signed-off-by: Robert Baldyga <r.baldyga@xxxxxxxxxxx>
---
drivers/usb/gadget/epautoconf.c | 81 ++++++++++++++++-------------------------
1 file changed, 32 insertions(+), 49 deletions(-)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 52658fe..95e1275 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -32,7 +32,6 @@ ep_matches (
{
u8 type;
u16 max;
-
int num_req_streams = 0;
/* endpoint already claimed? */
@@ -40,6 +39,20 @@ ep_matches (
return 0;
type = usb_endpoint_type(desc);
+ max = 0x7ff & usb_endpoint_maxp(desc);
+
+ if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
+ return 0;
+ if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out)
+ return 0;
+
+ if (max > ep->maxpacket_limit)
+ return 0;
+
+ /* "high bandwidth" works only at high speed */
+ if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
+ return 0;
+
switch (type) {
case USB_ENDPOINT_XFER_CONTROL:
/* only support ep0 for portable CONTROL traffic */
@@ -47,66 +60,36 @@ ep_matches (
case USB_ENDPOINT_XFER_ISOC:
if (!ep->caps.type_iso)
return 0;
+ /* ISO: limit 1023 bytes full speed,
+ * 1024 high/super speed
+ */
+ if (!gadget_is_dualspeed(gadget) && max > 1023)
+ return 0;
break;
case USB_ENDPOINT_XFER_BULK:
if (!ep->caps.type_bulk)
return 0;
+ if (ep_comp && gadget_is_superspeed(gadget)) {
+ /* Get the number of required streams from the
+ * EP companion descriptor and see if the EP
+ * matches it
+ */
+ num_req_streams = ep_comp->bmAttributes & 0x1f;
+ if (num_req_streams > ep->max_streams)
+ return 0;
+ }
break;
case USB_ENDPOINT_XFER_INT:
- /* bulk endpoints handle interrupt transfers,
+ /* Bulk endpoints handle interrupt transfers,
* except the toggle-quirky iso-synch kind
*/
if (!ep->caps.type_int && !ep->caps.type_bulk)
return 0;
- break;
- }
-
- if (usb_endpoint_dir_in(desc)) {
- if (!ep->caps.dir_in)
- return 0;
- } else {
- if (!ep->caps.dir_out)
- return 0;
- }
-
- /*
- * Get the number of required streams from the EP companion
- * descriptor and see if the EP matches it
- */
- if (usb_endpoint_xfer_bulk(desc)) {
- if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) {
- num_req_streams = ep_comp->bmAttributes & 0x1f;
- if (num_req_streams > ep->max_streams)
- return 0;
- }
-
- }
-
- /* endpoint maxpacket size is an input parameter, except for bulk
- * where it's an output parameter representing the full speed limit.
- * the usb spec fixes high speed bulk maxpacket at 512 bytes.
- */
- max = 0x7ff & usb_endpoint_maxp(desc);
- switch (type) {
- case USB_ENDPOINT_XFER_INT:
- /* INT: limit 64 bytes full speed, 1024 high/super speed */
+ /* INT: limit 64 bytes full speed,
+ * 1024 high/super speed
+ */
if (!gadget_is_dualspeed(gadget) && max > 64)
return 0;
- /* FALLTHROUGH */
-
- case USB_ENDPOINT_XFER_ISOC:
- /* ISO: limit 1023 bytes full speed, 1024 high/super speed */
- if (ep->maxpacket_limit < max)
- return 0;
- if (!gadget_is_dualspeed(gadget) && max > 1023)
- return 0;
-
- /* BOTH: "high bandwidth" works only at high speed */
- if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) {
- if (!gadget_is_dualspeed(gadget))
- return 0;
- /* configure your hardware with enough buffering!! */
- }
break;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
