Hi!
My external USB-Speaker produces the following in the Journal from
systemd-journald
I'm not able to use the Speaker. Wheter ALSA nor pulseaudio can play
anything.
# aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: HDMI [HDA Intel HDMI], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: HDMI [HDA Intel HDMI], Gerät 7: HDMI 1 [HDMI 1]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: HDMI [HDA Intel HDMI], Gerät 8: HDMI 2 [HDMI 2]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 1: PCH [HDA Intel PCH], Gerät 0: ALC3227 Analog [ALC3227 Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 2: AC209N [AC209N], Gerät 0: USB Audio [USB Audio]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
# aplay -D plughw:AC209N /usr/share/sounds/alsa/Front_Right.wav
Wiedergabe: WAVE '/usr/share/sounds/alsa/Front_Right.wav' : Signed 16
bit Little Endian, Rate: 48000 Hz, mono
aplay: set_params:1297: Fehler beim Setzen der Hardware-Parameter:
ACCESS: RW_INTERLEAVED
FORMAT: S16_LE
SUBFORMAT: STD
SAMPLE_BITS: 16
FRAME_BITS: 16
CHANNELS: 1
RATE: 48000
PERIOD_TIME: 125000
PERIOD_SIZE: 6000
PERIOD_BYTES: 12000
PERIODS: 4
BUFFER_TIME: 500000
BUFFER_SIZE: 24000
BUFFER_BYTES: 48000
TICK_TIME: 0
# journalctl -f
Aug 02 11:53:17 aldebaran kernel: usb 2-3: new full-speed USB device
number 9 using xhci_hcd
Aug 02 11:53:17 aldebaran kernel: usb 2-3: config 1 has an invalid
interface number: 4 but max is 3
Aug 02 11:53:17 aldebaran kernel: usb 2-3: config 1 has no interface
number 3
Aug 02 11:53:17 aldebaran kernel: usb 2-3: New USB device found,
idVendor=e3b4, idProduct=0811
Aug 02 11:53:17 aldebaran kernel: usb 2-3: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
Aug 02 11:53:17 aldebaran kernel: usb 2-3: Product: AC209N
Aug 02 11:53:17 aldebaran kernel: usb 2-3: Manufacturer: AC209N
Aug 02 11:53:17 aldebaran kernel: usb-storage 2-3:1.0: USB Mass Storage
device detected
Aug 02 11:53:17 aldebaran kernel: scsi host8: usb-storage 2-3:1.0
Aug 02 11:53:17 aldebaran kernel: xhci_hcd 0000:00:14.0: Trying to add
endpoint 0x2 without dropping it.
Aug 02 11:53:17 aldebaran kernel: usb 2-3: Not enough bandwidth for
altsetting 1
Aug 02 11:53:17 aldebaran kernel: input: AC209N AC209N as
/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.4/0003:E3B4:0811.0002/input/input25
Aug 02 11:53:17 aldebaran mtp-probe[7081]: checking bus 2, device 9:
"/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3"
Aug 02 11:53:17 aldebaran mtp-probe[7081]: bus: 2, device: 9 was not an
MTP device
Aug 02 11:53:17 aldebaran kernel: hid-generic 0003:E3B4:0811.0002:
input,hidraw0: USB HID v2.01 Device [AC209N AC209N ] on
usb-0000:00:14.0-3/input4
Aug 02 11:53:17 aldebaran gdm-Xorg-:0[765]: (II) config/udev: Adding
input device AC209N AC209N (/dev/input/event5)
Aug 02 11:53:17 aldebaran gdm-Xorg-:0[765]: (**) AC209N AC209N :
Applying InputClass "evdev keyboard catchall"
Aug 02 11:53:17 aldebaran gdm-Xorg-:0[765]: (II) Using input driver
'evdev' for 'AC209N AC209N '
Aug 02 11:53:17 aldebaran gdm-Xorg-:0[765]: (**) AC209N AC209N : always
reports core events
Aug 02 11:53:17 aldebaran gdm-Xorg-:0[765]: (**) evdev: AC209N AC209N :
Device: "/dev/input/event5"
Aug 02 11:53:17 aldebaran gdm-Xorg-:0[765]: (--) evdev: AC209N AC209N :
Vendor 0xe3b4 Product 0x811
Aug 02 11:53:17 aldebaran gdm-Xorg-:0[765]: (--) evdev: AC209N AC209N :
Found keys
Aug 02 11:53:17 aldebaran gdm-Xorg-:0[765]: (II) evdev: AC209N AC209N :
Configuring as keyboard
Aug 02 11:53:17 aldebaran gdm-Xorg-:0[765]: (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.4/0003:E3B4:0811.0002/input/input25/event5"
Aug 02 11:53:17 aldebaran gdm-Xorg-:0[765]: (II) XINPUT: Adding extended
input device "AC209N AC209N " (type: KEYBOARD, id 10)
Aug 02 11:53:17 aldebaran gdm-Xorg-:0[765]: (**) Option "xkb_rules" "evdev"
Aug 02 11:53:17 aldebaran gdm-Xorg-:0[765]: (**) Option "xkb_model" "pc105"
Aug 02 11:53:17 aldebaran gdm-Xorg-:0[765]: (**) Option "xkb_layout" "de"
Aug 02 11:53:17 aldebaran kernel: xhci_hcd 0000:00:14.0: Trying to add
endpoint 0x2 without dropping it.
Aug 02 11:53:17 aldebaran kernel: usb 2-3: Not enough bandwidth for
altsetting 1
Aug 02 11:53:17 aldebaran kernel: usb 2-3: 2:1: usb_set_interface failed
(-22)
Aug 02 11:53:17 aldebaran kernel: xhci_hcd 0000:00:14.0: Trying to add
endpoint 0x2 without dropping it.
Aug 02 11:53:17 aldebaran kernel: usb 2-3: Not enough bandwidth for
altsetting 1
Aug 02 11:53:17 aldebaran kernel: usb 2-3: 2:1: usb_set_interface failed
(-22)
Aug 02 11:53:17 aldebaran kernel: xhci_hcd 0000:00:14.0: Trying to add
endpoint 0x2 without dropping it.
Aug 02 11:53:17 aldebaran kernel: usb 2-3: Not enough bandwidth for
altsetting 1
Aug 02 11:53:17 aldebaran kernel: usb 2-3: 2:1: usb_set_interface failed
(-22)
Aug 02 11:53:17 aldebaran kernel: xhci_hcd 0000:00:14.0: Trying to add
endpoint 0x2 without dropping it.
Aug 02 11:53:17 aldebaran kernel: usb 2-3: Not enough bandwidth for
altsetting 1
Aug 02 11:53:17 aldebaran kernel: usb 2-3: 2:1: usb_set_interface failed
(-22)
Aug 02 11:53:17 aldebaran kernel: xhci_hcd 0000:00:14.0: Trying to add
endpoint 0x2 without dropping it.
Aug 02 11:53:17 aldebaran kernel: usb 2-3: Not enough bandwidth for
altsetting 1
Aug 02 11:53:17 aldebaran kernel: usb 2-3: 2:1: usb_set_interface failed
(-22)
[The same hundred times again and again...]
Aug 02 11:53:17 aldebaran kernel: xhci_hcd 0000:00:14.0: Trying to add
endpoint 0x2 without dropping it.
Aug 02 11:53:17 aldebaran kernel: usb 2-3: Not enough bandwidth for
altsetting 1
Aug 02 11:53:17 aldebaran kernel: usb 2-3: 2:1: usb_set_interface failed
(-22)
Aug 02 11:53:17 aldebaran pulseaudio[2103]: [pulseaudio]
module-alsa-card.c: Failed to find a working profile.
Aug 02 11:53:17 aldebaran pulseaudio[2103]: [pulseaudio] module.c:
Failed to load module "module-alsa-card" (argument: "device_id="2"
name="usb-AC209N_AC209N-01-AC209N"
card_name="alsa_card.usb-AC209N_AC209N-01-AC209N" namereg_fail=false
tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes
use_ucm=yes card_properties="module-udev-detect.discovered=1""):
initialization failed.
Aug 02 11:53:17 aldebaran pulseaudio[2103]: [pulseaudio]
module-alsa-card.c: Failed to find a working profile.
Aug 02 11:53:17 aldebaran pulseaudio[2103]: [pulseaudio] module.c:
Failed to load module "module-alsa-card" (argument: "device_id="2"
name="usb-AC209N_AC209N-01-AC209N"
card_name="alsa_card.usb-AC209N_AC209N-01-AC209N" namereg_fail=false
tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes
use_ucm=yes card_properties="module-udev-detect.discovered=1""):
initialization failed.
Aug 02 11:53:17 aldebaran pulseaudio[2103]: [pulseaudio]
module-alsa-card.c: Failed to find a working profile.
Aug 02 11:53:17 aldebaran pulseaudio[2103]: [pulseaudio] module.c:
Failed to load module "module-alsa-card" (argument: "device_id="2"
name="usb-AC209N_AC209N-01-AC209N"
card_name="alsa_card.usb-AC209N_AC209N-01-AC209N" namereg_fail=false
tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes
use_ucm=yes card_properties="module-udev-detect.discovered=1""):
initialization failed.
Aug 02 11:53:17 aldebaran pulseaudio[2103]: [pulseaudio]
module-alsa-card.c: Failed to find a working profile.
Aug 02 11:53:17 aldebaran pulseaudio[2103]: [pulseaudio] module.c:
Failed to load module "module-alsa-card" (argument: "device_id="2"
name="usb-AC209N_AC209N-01-AC209N"
card_name="alsa_card.usb-AC209N_AC209N-01-AC209N" namereg_fail=false
tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes
use_ucm=yes card_properties="module-udev-detect.discovered=1""):
initialization failed.
Aug 02 11:53:17 aldebaran pulseaudio[2103]: [pulseaudio]
module-alsa-card.c: Failed to find a working profile.
Aug 02 11:53:17 aldebaran pulseaudio[2103]: [pulseaudio] module.c:
Failed to load module "module-alsa-card" (argument: "device_id="2"
name="usb-AC209N_AC209N-01-AC209N"
card_name="alsa_card.usb-AC209N_AC209N-01-AC209N" namereg_fail=false
tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes
use_ucm=yes card_properties="module-udev-detect.discovered=1""):
initialization failed.
Aug 02 11:53:17 aldebaran pulseaudio[2103]: [pulseaudio]
module-alsa-card.c: Failed to find a working profile.
Aug 02 11:53:17 aldebaran pulseaudio[2103]: [pulseaudio] module.c:
Failed to load module "module-alsa-card" (argument: "device_id="2"
name="usb-AC209N_AC209N-01-AC209N"
card_name="alsa_card.usb-AC209N_AC209N-01-AC209N" namereg_fail=false
tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes
use_ucm=yes card_properties="module-udev-detect.discovered=1""):
initialization failed.
Aug 02 11:53:17 aldebaran pulseaudio[2103]: [pulseaudio]
module-udev-detect.c: Tried to configure
/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/sound/card2
(alsa_card.usb-AC209N_AC209N-01-AC209N) more often than 5 times in 10s
Aug 02 11:53:18 aldebaran kernel: scsi 8:0:0:0: scsi scan: INQUIRY
result too short (5), using 36
Aug 02 11:53:18 aldebaran kernel: scsi 8:0:0:0: Direct-Access JIELI
MP3 PLAYER 4.05 PQ: 0 ANSI: 2
Aug 02 11:53:18 aldebaran kernel: sd 8:0:0:0: Attached scsi generic sg5
type 0
Aug 02 11:53:18 aldebaran kernel: sd 8:0:0:0: [sdb] Attached SCSI
removable disk
In the debianforum.de i got the hint, it's a kernel-problem, so i'm
mailing this to the list.
Hope you can help me, and you got enough information.
Best regards
Jakob Schürz
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
