Re: [PATCH v5 2/6] usb: interface authorization: Introduces the default interface authorization

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Mittwoch, den 22.07.2015, 16:40 -0700 schrieb Greg KH:
> On Thu, Jun 18, 2015 at 07:23:22PM +0200, Stefan Koch wrote:
> > Interfaces are allowed per default.
> > This can disabled or enabled (again) by writing 0 or 1 to
> > /sys/bus/usb/devices/usbX/interface_authorized_default
> > 
> > Signed-off-by: Stefan Koch <skoch@xxxxxxx>
> > ---
> >  drivers/usb/core/hcd.c     | 52 ++++++++++++++++++++++++++++++++++++++++++++++
> >  drivers/usb/core/message.c |  2 ++
> >  include/linux/usb/hcd.h    |  3 +++
> >  3 files changed, 57 insertions(+)
> > 
> > diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
> > index 45a915c..4ceb753 100644
> > --- a/drivers/usb/core/hcd.c
> > +++ b/drivers/usb/core/hcd.c
> > @@ -882,9 +882,58 @@ static ssize_t authorized_default_store(struct device *dev,
> >  }
> >  static DEVICE_ATTR_RW(authorized_default);
> >  
> > +/*
> > + * interface_authorized_default_show - show default authorization status
> > + * for USB interfaces
> > + *
> > + * note: interface_auhorized_default is the default value
> > + *       for initializing the authorized attribute of interfaces
> > + */
> > +static ssize_t interface_authorized_default_show(struct device *dev,
> > +		struct device_attribute *attr, char *buf)
> > +{
> > +	struct usb_device *usb_dev = to_usb_device(dev);
> > +	struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
> > +	unsigned def = HCD_INTERFACE_AUTHORIZED_DEFAULT(hcd) ? 1 : 0;
> > +
> > +	return sprintf(buf, "%u\n", def);
> > +}
> > +
> > +/*
> > + * interface_authorized_default_store - store default authorization status
> > + * for USB interfaces
> > + *
> > + * note: interface_auhorized_default is the default value
> > + *       for initializing the authorized attribute of interfaces
> > + */
> > +static ssize_t interface_authorized_default_store(struct device *dev,
> > +		struct device_attribute *attr, const char *buf, size_t count)
> > +{
> > +	struct usb_device *usb_dev = to_usb_device(dev);
> > +	struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus);
> > +	int rc = count;
> > +	bool val;
> > +
> > +	if (strtobool(buf, &val) != 0)
> > +		return -EINVAL;
> > +
> > +	switch (val) {
> > +	case 0:
> > +		clear_bit(HCD_FLAG_INTERFACE_AUTHORIZED_DEFAULT, &hcd->flags);
> > +		break;
> > +	case 1:
> > +		set_bit(HCD_FLAG_INTERFACE_AUTHORIZED_DEFAULT, &hcd->flags);
> > +		break;
> > +	}
> > +
> > +	return rc;
> > +}
> > +static DEVICE_ATTR_RW(interface_authorized_default);
> > +
> >  /* Group all the USB bus attributes */
> >  static struct attribute *usb_bus_attrs[] = {
> >  		&dev_attr_authorized_default.attr,
> > +		&dev_attr_interface_authorized_default.attr,
> >  		NULL,
> >  };
> >  
> > @@ -2679,6 +2728,9 @@ int usb_add_hcd(struct usb_hcd *hcd,
> >  		hcd->authorized_default = authorized_default;
> >  	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
> >  
> > +	/* per default all interfaces are authorized */
> > +	set_bit(HCD_FLAG_INTERFACE_AUTHORIZED_DEFAULT, &hcd->flags);
> > +
> >  	/* HC is in reset state, but accessible.  Now do the one-time init,
> >  	 * bottom up so that hcds can customize the root hubs before hub_wq
> >  	 * starts talking to them.  (Note, bus id is assigned early too.)
> > diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
> > index f368d20..1e85f62 100644
> > --- a/drivers/usb/core/message.c
> > +++ b/drivers/usb/core/message.c
> > @@ -1807,6 +1807,8 @@ free_interfaces:
> >  		intfc = cp->intf_cache[i];
> >  		intf->altsetting = intfc->altsetting;
> >  		intf->num_altsetting = intfc->num_altsetting;
> > +		intf->authorized =
> > +				HCD_INTERFACE_AUTHORIZED_DEFAULT(hcd) ? 1 : 0;
> >  		kref_get(&intfc->ref);
> >  
> >  		alt = usb_altnum_to_altsetting(intf, 0);
> > diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
> > index 68b1e83..93c19b2 100644
> > --- a/include/linux/usb/hcd.h
> > +++ b/include/linux/usb/hcd.h
> > @@ -120,6 +120,7 @@ struct usb_hcd {
> >  #define HCD_FLAG_WAKEUP_PENDING		4	/* root hub is resuming? */
> >  #define HCD_FLAG_RH_RUNNING		5	/* root hub is running? */
> >  #define HCD_FLAG_DEAD			6	/* controller has died? */
> > +#define HCD_FLAG_INTERFACE_AUTHORIZED_DEFAULT	8
> 
> Why not pick 7?
> 
> And that's a huge name, how about 'HCD_FLAG_INTF_AUTHORIZED'?
> 

7 is used that 6 can used later for the device authorization.

Furthermore see Alan's second reply to [PATCH v3 2/6].

What do you think?


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux