No functional change. This is in preparation for handling non maxpacket
aligned transfers greater than bounce buffer size. This is basically to
avoid code duplication when using chained TRB transfers to handle
non maxpacket aligned transfers greater than bounce buffer size.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
drivers/usb/dwc3/ep0.c | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 713e46a..4998074 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -779,7 +779,11 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
struct usb_request *ur;
struct dwc3_trb *trb;
struct dwc3_ep *ep0;
- u32 transferred;
+ unsigned transfer_size = 0;
+ unsigned maxp;
+ unsigned remaining_ur_length;
+ void *buf;
+ u32 transferred = 0;
u32 status;
u32 length;
u8 epnum;
@@ -808,20 +812,24 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
}
ur = &r->request;
+ buf = ur->buf;
+ remaining_ur_length = ur->length;
length = trb->size & DWC3_TRB_SIZE_MASK;
+ maxp = ep0->endpoint.maxpacket;
+
if (dwc->ep0_bounced) {
- unsigned maxp = ep0->endpoint.maxpacket;
- unsigned transfer_size = roundup(ur->length, maxp);
+ transfer_size = roundup((ur->length - transfer_size),
+ maxp);
/* Maximum of DWC3_EP0_BOUNCE_SIZE can only be received */
if (transfer_size > DWC3_EP0_BOUNCE_SIZE)
transfer_size = DWC3_EP0_BOUNCE_SIZE;
- transferred = min_t(u32, ur->length,
- transfer_size - length);
- memcpy(ur->buf, dwc->ep0_bounce, transferred);
+ transferred = min_t(u32, remaining_ur_length,
+ transfer_size - length);
+ memcpy(buf, dwc->ep0_bounce, transferred);
} else {
transferred = ur->length - length;
}
@@ -930,7 +938,7 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
DWC3_TRBCTL_CONTROL_DATA);
} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
&& (dep->number == 0)) {
- u32 transfer_size;
+ u32 transfer_size = 0;
u32 maxpacket;
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
@@ -941,7 +949,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
}
maxpacket = dep->endpoint.maxpacket;
- transfer_size = roundup(req->request.length, maxpacket);
+ transfer_size = roundup((req->request.length - transfer_size),
+ maxpacket);
if (transfer_size > DWC3_EP0_BOUNCE_SIZE) {
dev_WARN(dwc->dev, "bounce buf can't handle req len\n");
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
