On Sun, Jun 21, 2015 at 12:12 AM, Stefan Agner <stefan@xxxxxxxx> wrote:
> This driver allows to use the CBUS pins, e.g. CBUS 0-3 on FT232R
> type of devices. Note that the pins need to be configured first
> by using I/O mode signal option in the EEPROM. This is _not_ the
> factory default configuration of any of the four pins.
>
> See also FTDI's Application Note AN_232R-01.
>
> Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
I see no big problems with this driver but I guess the serial portions
are the controversial parts.
> +++ b/drivers/gpio/gpio-ftdi-cbus.c
> @@ -0,0 +1,167 @@
> +/*
> + * gpiolib support for FTDI SIO chips supporting CBUS GPIO's (FT232R class)
> + *
> + * Copyright 2015 Stefan Agner
> + *
> + * Author: Stefan Agner <stefan@xxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * Note: To use the GPIOs on CBUS the signal option need to be set to
> + * I/O mode in EEPROM!
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/slab.h>
> +#include <linux/module.h>
> +#include <linux/gpio.h>
#include <linux/gpio/driver.h>
should be enough.
> +static int ftdi_cbus_gpio_direction_input(struct gpio_chip *chip,
> + unsigned offset)
> +{
> + struct ftdi_cbus_gpio *fcg = to_ftdi_cbus_gpio(chip);
> +
> + fcg->cbus_mask &= ~((1 << offset) << 4);
I usually replace:
(1 << offset)
with
#include <linux/bitops.h>
BIT(offset)
so it's clear what is happening.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
