From: Felipe Balbi <balbi@xxxxxx> Add interrupt names so that the same can be used for OTG easily. Signed-off-by: Felipe Balbi <balbi@xxxxxx> Signed-off-by: Roger Quadros <rogerq@xxxxxx> --- arch/arm/boot/dts/am4372.dtsi | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index c80a3e2..3f68b27 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -859,7 +859,12 @@ usb1: usb@48390000 { compatible = "synopsys,dwc3"; reg = <0x48390000 0x10000>; - interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; phys = <&usb2_phy1>; phy-names = "usb2-phy"; maximum-speed = "high-speed"; @@ -883,7 +888,12 @@ usb2: usb@483d0000 { compatible = "synopsys,dwc3"; reg = <0x483d0000 0x10000>; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "peripheral", + "host", + "otg"; phys = <&usb2_phy2>; phy-names = "usb2-phy"; maximum-speed = "high-speed"; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html