The following changes since commit d4a4f75cd8f29cd9464a5a32e9224a91571d6649:
Linux 4.1-rc7 (2015-06-07 20:23:50 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ tags/usb-4.2-rc1
for you to fetch changes up to 50641056d833813b71b0ad51823f7ded8dd62e7f:
usb: dwc3: Use ASCII space in Kconfig (2015-06-12 17:42:31 -0700)
----------------------------------------------------------------
USB patches for 4.2-rc1
Here's the big USB patchset for 4.2-rc1. As is normal these days, the
majority of changes are in the gadget drivers, with a bunch of other
small driver changes.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
----------------------------------------------------------------
Abhishek Bist (1):
USB: hcd.h : Removed an unnecessary function prototype usb_find_interface_driver()
Akinobu Mita (1):
usb: storage: fix module reference for scsi host
Alan Stern (1):
USB: don't build PCI quirks if USB support isn't configured
Alexey Sokolov (1):
cdc-acm: Add support of ATOL FPrint fiscal printers
Andrzej Pietrasiewicz (6):
usb: gadget: rndis: use rndis_params instead of configNr
usb: gadget: rndis: style correction
usb: gadget: rndis: remove the limit of available rndis connections
usb: gadget: rndis: change the value passed to rndis_signal_(dis)connect()
usb: gadget: rndis: don't duplicate the "i" variable
usb: gadget: rndis: use signed type for a signed value
Arnd Bergmann (2):
usb: renesas_usbhs: avoid uninitialized variable use
usb: phy: add static inline wrapper for devm_usb_get_phy_by_node
Arun Ramamurthy (3):
phy: core: Add devm_of_phy_get_by_index to phy-core
usb: ehci-platform: Use devm_of_phy_get_by_index
usb: ohci-platform: Use devm_of_phy_get_by_index
Axel Lin (1):
phy: core: Check requested PHY status in _of_phy_get()
Bin Liu (2):
usb: musb: only set test mode once
usb: musb: add softconnect for host mode
Brian Norris (2):
Documentation: devicetree: add Broadcom SATA PHY binding
phy: add Broadcom SATA3 PHY driver for Broadcom STB SoCs
Chris Bainbridge (1):
usb: host: xhci: remove incorrect comment about mutex
Colin Ian King (1):
usb: isp1760: check for null return from kzalloc
Dan Carpenter (1):
USB: devio: fix a condition in async_completed()
Dmitry Torokhov (1):
phy: phy-core: allow specifying supply at port level
Fabian Frederick (1):
cdc-acm: use swap() in acm_probe()
Fabio Estevam (1):
usb: chipidea: usbmisc_imx: Remove unneeded semicolon
Felipe Balbi (8):
phy: miphy28lp: fix sparse warnings
phy: miphy365x: fix sparse warnings
usb: dwc2: hcd: fix build warning
usb: gadget: atmel: fix build warning
usb: musb: am35x: fix build warnings
usb: musb: ux500: fix build warnings
usb: gadget: atmel: fix build warnings
usb: dwc3: gadget: don't clear EP_BUSY too early
Geert Uytterhoeven (3):
usb: phy: Remove the phy-rcar-gen2-usb driver
usb: phy: Allow compile test of GPIO consumers if !GPIOLIB
usb: phy: Remove the phy-rcar-gen2-usb driver
Greg Kroah-Hartman (25):
USB: ehci-dbg.c: move assignment out of if () block
USB: fusbh200-hcd.c: move assignment out of if () block
USB: hcd.c: move assignment out of if () block
USB: hub.c: move assignment out of if () block
USB: inode.c: move assignment out of if () block
USB: isp116x-hcd.c: move assignment out of if () block
USB: mon_bin.c: move assignment out of if () block
USB: mon_main.c: move assignment out of if () block
USB: mon_stat.c: move assignment out of if () block
USB: ohci-dbg.c: move assignment out of if () block
USB: ohci-hcd.c: move assignment out of if () block
USB: ohci-q.c: move assignment out of if () block
USB: sisusb.c: move assignment out of if () block
USB: sisusb_con.c: move assignment out of if () block
USB: speedtch.c: move assignment out of if () block
USB: usbatm.c: move assignment out of if () block
USB: usblp.c: move assignment out of if () block
USB: uss720.c: move assignment out of if () block
USB: xusbatm.c: move assignment out of if () block
Merge 4.1-rc4 into usb-next
Merge tag 'usb-for-v4.2' of git://git.kernel.org/.../balbi/usb into usb-next
Merge tag 'phy-for-v4.2' of git://git.kernel.org/.../kishon/linux-phy into usb-next
Merge tag 'usb-serial-4.2-rc1' of git://git.kernel.org/.../johan/usb-serial into usb-next
Merge 4.1-rc7 into usb-next
Merge tag 'usb-ci-v4.2-rc1' of git://git.kernel.org/.../peter.chen/usb into usb-work
Gregory Herrero (15):
usb: dwc2: add controller hibernation support
usb: dwc2: implement hibernation during bus suspend/resume
usb: dwc2: controller must update lx_state before releasing lock
usb: dwc2: add external_id_pin_ctl core parameter
usb: dwc2: gadget: use reset detect interrupt
usb: dwc2: gadget: ignore pm suspend/resume in L2
usb: dwc2: gadget: prevent new request submission during suspend
usb: dwc2: gadget: powerup controller if needed
usb: dwc2: gadget: enable otg flag in dual role configuration
usb: dwc2: host: add bus_suspend/bus_resume callback
usb: dwc2: host: resume root hub on port connect
usb: dwc2: host: spinlock urb_enqueue
usb: dwc2: host: don't use dma_alloc_coherent with irqs disabled
usb: dwc2: add hibernation core parameter
usb: dwc2: host: ensure qtb exists before dereferencing it
Hans de Goede (6):
usb: musb: Add pre and post root port reset end callbacks
usb: musb: Make musb_write_rxfun* and musb_write_rxhub* work like their tx versions
usb: musb: Make busctl_offset an io-op rather then a define
usb: musb: Do not use musb_read[b|w] / _write[b|w] wrappers in generic fifo functions
usb: musb: Fix platform code being unable to override ep access ops
phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect
Hauke Mehrtens (2):
USB: ssb: fix error handling in ssb_hcd_create_pdev()
USB: ssb: use devm_kzalloc
Heikki Krogerus (12):
usb: add bus type for USB ULPI
usb: dwc3: USB2 PHY register access bits
usb: dwc3: ULPI or UTMI+ select
usb: dwc3: store driver data earlier
usb: dwc3: cache hwparams earlier
usb: dwc3: soft reset to it's own function
usb: dwc3: setup phys earlier
usb: dwc3: add hsphy_interface property
usb: dwc3: pci: add quirk for Baytrails
usb: dwc3: add ULPI interface support
phy: helpers for USB ULPI PHY registering
phy: add driver for TI TUSB1210 ULPI PHY
Ivan T. Ivanov (2):
usb: phy: msm: Use extcon framework for VBUS and ID detection
usb: phy: msm: Manual PHY and LINK controller VBUS change notification
Jingwu Lin (1):
usb: dwc2: host: implement test mode
Joachim Eastwood (1):
USB: ehci-platform: support EHCIs with transaction translator
Joe Perches (2):
usb: gadget: s3c2410_udc: Remove static char buffer, use vsprintf extension %pV
usb: storage: scsiglue: Remove SPRINTF macro use
Johan Hovold (5):
usb: musb: fix inefficient copy of unaligned buffers
USB: musb: fix inefficient copy of unaligned buffers
USB: ehci-tegra: fix inefficient copy of unaligned buffers
USB: cdc-acm: use idr to manage minor numbers
USB: cdc-acm: add support for up to 256 devices
Kazuya Mizuguchi (1):
usb: renesas_usbhs: Fix fifo unclear in usbhsf_prepare_pop
Krzysztof Kozlowski (2):
usb: phy-ab8500-usb: Constify platform_device_id
usb: phy-ab8500-usb: Constify platform_device_id
Kuninori Morimoto (1):
usb: renesas_usbhs: tidyup usbhs_for_each_dfifo macro
Mathias Nyman (2):
xhci: optimize xhci bus resume time
xhci: Return correct number of tranferred bytes for stalled control endpoints
Matthew Garrett (2):
usb: Prefer firmware values when determining whether a port is removable
usb: Set unused ports to "fixed" rather than "unknown"
Mian Yousaf Kaukab (16):
usb: dwc2: move debugfs code to a separate file
usb: dwc2: debugfs: add support for complete register dump
usb: dwc2: set parameter values in probe function
usb: dwc2: gadget: remove s3c_hsotg_ep_disable_force
usb: dwc2: host: register handle to the phy
usb: dwc2: remove dwc2_platform.ko
usb: gadget: net2280: fix ep_cfg for defect7374
usb: gadget: net2280: reset sequence number on ep enable
usb: gadget: net2280: unconditionally reset dma in usb_reset
usb: gadget: net2280: don't set ep_cfg.direction bit
usb: gadget: net2280: set all byte enables on start
usb: gadget: net2280: check interrupts for all endpoints
usb: gadget: net2280: fix use of GPEP in both directions
usb: gadget: autoconf: net2280: match hardware and usb ep address
usb: gadget: net2280: physically disable endpoint on disable operation
usb: gadget: net2280: fix pullup handling
NeilBrown (6):
usb: phy: Add interface to get phy give of device_node.
power: twl4030_charger: find associated phy by more reliable means.
phy: twl4030-usb: make runtime pm more reliable.
phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback.
phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function.
phy: twl4030-usb: add ABI documentation
Nikhil Badola (2):
drivers:usb:fsl: Check IP version 2.4 for mph USB controller
drivers:usb:fsl: Add support for USB controller version-2.5
Nizam Haider (1):
Usb: core: buffer: fixed the checkpatch warning
Nobuhiro Iwamatsu (1):
usb: renesas_usbhs: Add access control for INTSTS1 and INTENB1 register
Peter Chen (1):
usb: Documentation: gadget-testing: fix parameter for capture channel mask
Peter Griffin (1):
usb: dwc3: dwc3-st: Update the incorrect DT dwc3 example.
Ramneek Mehresh (2):
drivers:usb:fsl:Make fsl ehci drv an independent driver module
drivers:usb:fsl: Fix compilation error for fsl ehci drv
Rob Herring (6):
dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings
phy: Add Marvell USB 2.0 OTG 28nm PHY
phy: add Marvell HSIC 28nm PHY
dt-bindings: Consolidate ChipIdea USB ci13xxx bindings
usb: chipidea: allow multiple instances to use default ci_default_pdata
usb: chipidea: add work-around for Marvell HSIC PHY startup
Robert Schlabbach (1):
usb: core: Fix USB 3.0 devices lost in NOTATTACHED state after a hub port reset
Roger Quadros (5):
usb: xhci: cleanup xhci_hcd allocation
usb: xhci: plat: Create both HCDs before adding them
usb: xhci: Allow usb_add/remove_hcd() to be called repeatedly
usb: xhci: fix xhci locking up during hcd remove
usb: xhci: Fix suspend/resume when used with OTG core
Rui Miguel Silva (1):
usb: gadget: f_fs: add extra check before unregister_gadget_item
Rupesh Tatiya (1):
usb: Enable LPM for USB 2.01+ full-speed devices
Subbaraya Sundeep Bhatta (2):
usb: dwc3: gadget: return error if command sent to DGCMD register fails
usb: dwc3: gadget: return error if command sent to DEPCMD register fails
Teunis van Beelen (1):
USB: usbtmc: add device quirk for Rigol DS6104
Thierry Reding (1):
usb: dwc3: Use ASCII space in Kconfig
Tony Lindgren (10):
usb: musb: Fix up DMA related macros
usb: musb: Set up function pointers for DMA
usb: musb: Get rid of the DMA ifdefs for musb_core.c
usb: musb: Remove DMA ifdef for musb_gadget.c short_packet
usb: musb: Remove ifdefs for TX DMA for musb_host.c
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part1
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part2
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part3
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part4
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part5
Vaishali Thakkar (1):
USB: serial: mos7840: Use setup_timer
Wei Yongjun (1):
usb: gadget: uvc: remove unused including <linux/version.h>
Yoshihiro Shimoda (5):
usb: renesas_usbhs: Revise the binding document about the dma-names
phy: rcar-gen2: Add support for R-Car E2
usb: renesas_usbhs: Change USBHS_TYPE_R8A779x to USBHS_TYPE_RCAR_GEN2
usb: renesas_usbhs: Add support for R-Car E2
usb: renesas_usbhs: Don't disable the pipe if Control write status stage
.../ABI/testing/sysfs-platform-twl4030-usb | 8 +
.../bindings/phy/brcm,brcmstb-sata-phy.txt | 40 ++
.../devicetree/bindings/phy/pxa1928-usb-phy.txt | 18 +
.../devicetree/bindings/phy/rcar-gen2-phy.txt | 1 +
.../devicetree/bindings/power/twl-charger.txt | 10 +
.../devicetree/bindings/usb/ci-hdrc-imx.txt | 35 -
.../devicetree/bindings/usb/ci-hdrc-qcom.txt | 17 -
.../devicetree/bindings/usb/ci-hdrc-usb2.txt | 22 +-
.../devicetree/bindings/usb/ci-hdrc-zevio.txt | 17 -
Documentation/devicetree/bindings/usb/dwc3-st.txt | 7 +-
Documentation/devicetree/bindings/usb/dwc3.txt | 2 +
.../devicetree/bindings/usb/msm-hsusb.txt | 11 +
.../devicetree/bindings/usb/renesas_usbhs.txt | 1 +
.../devicetree/bindings/usb/twlxxxx-usb.txt | 3 +
Documentation/devicetree/bindings/usb/usb-ehci.txt | 2 +
Documentation/phy.txt | 7 +-
Documentation/usb/gadget-testing.txt | 4 +-
MAINTAINERS | 7 +
drivers/phy/Kconfig | 36 +
drivers/phy/Makefile | 4 +
drivers/phy/phy-brcmstb-sata.c | 216 ++++++
drivers/phy/phy-core.c | 67 +-
drivers/phy/phy-miphy28lp.c | 9 +-
drivers/phy/phy-miphy365x.c | 9 +-
drivers/phy/phy-pxa-28nm-hsic.c | 220 ++++++
drivers/phy/phy-pxa-28nm-usb2.c | 355 ++++++++++
drivers/phy/phy-rcar-gen2.c | 6 +-
drivers/phy/phy-sun4i-usb.c | 9 +
drivers/phy/phy-tusb1210.c | 153 ++++
drivers/phy/phy-twl4030-usb.c | 34 +-
drivers/phy/ulpi_phy.h | 31 +
drivers/power/twl4030_charger.c | 21 +-
drivers/usb/atm/speedtch.c | 18 +-
drivers/usb/atm/usbatm.c | 6 +-
drivers/usb/atm/xusbatm.c | 6 +-
drivers/usb/chipidea/ci_hdrc_usb2.c | 8 +-
drivers/usb/chipidea/host.c | 12 +
drivers/usb/chipidea/usbmisc_imx.c | 2 +-
drivers/usb/class/cdc-acm.c | 57 +-
drivers/usb/class/cdc-acm.h | 3 +-
drivers/usb/class/usblp.c | 15 +-
drivers/usb/class/usbtmc.c | 1 +
drivers/usb/common/Makefile | 1 +
drivers/usb/common/ulpi.c | 255 +++++++
drivers/usb/core/Kconfig | 20 +
drivers/usb/core/buffer.c | 3 +-
drivers/usb/core/devio.c | 2 +-
drivers/usb/core/hcd.c | 3 +-
drivers/usb/core/hub.c | 122 ++--
drivers/usb/dwc2/Kconfig | 8 -
drivers/usb/dwc2/Makefile | 9 +-
drivers/usb/dwc2/core.c | 439 +++++++++++-
drivers/usb/dwc2/core.h | 120 +++-
drivers/usb/dwc2/core_intr.c | 45 +-
drivers/usb/dwc2/debug.h | 27 +
drivers/usb/dwc2/debugfs.c | 771 +++++++++++++++++++++
drivers/usb/dwc2/gadget.c | 459 ++----------
drivers/usb/dwc2/hcd.c | 100 +--
drivers/usb/dwc2/hcd.h | 7 +-
drivers/usb/dwc2/hcd_intr.c | 66 +-
drivers/usb/dwc2/hcd_queue.c | 18 +-
drivers/usb/dwc2/platform.c | 25 +-
drivers/usb/dwc3/Kconfig | 7 +
drivers/usb/dwc3/Makefile | 4 +
drivers/usb/dwc3/core.c | 108 ++-
drivers/usb/dwc3/core.h | 26 +
drivers/usb/dwc3/dwc3-pci.c | 36 +
drivers/usb/dwc3/gadget.c | 10 +-
drivers/usb/dwc3/platform_data.h | 2 +
drivers/usb/dwc3/ulpi.c | 91 +++
drivers/usb/gadget/epautoconf.c | 24 +-
drivers/usb/gadget/function/f_fs.c | 10 +-
drivers/usb/gadget/function/f_rndis.c | 60 +-
drivers/usb/gadget/function/rndis.c | 352 +++++-----
drivers/usb/gadget/function/rndis.h | 33 +-
drivers/usb/gadget/function/u_rndis.h | 2 -
drivers/usb/gadget/function/uvc.h | 1 -
drivers/usb/gadget/legacy/inode.c | 9 +-
drivers/usb/gadget/udc/atmel_usba_udc.c | 6 +-
drivers/usb/gadget/udc/net2280.c | 140 +++-
drivers/usb/gadget/udc/s3c2410_udc.c | 28 +-
drivers/usb/host/Kconfig | 2 +-
drivers/usb/host/Makefile | 5 +-
drivers/usb/host/ehci-dbg.c | 3 +-
drivers/usb/host/ehci-fsl.c | 168 ++---
drivers/usb/host/ehci-hcd.c | 8 +-
drivers/usb/host/ehci-hub.c | 3 +-
drivers/usb/host/ehci-platform.c | 73 +-
drivers/usb/host/ehci-tegra.c | 12 +-
drivers/usb/host/ehci.h | 3 +
drivers/usb/host/fsl-mph-dr-of.c | 8 +
drivers/usb/host/fusbh200-hcd.c | 3 +-
drivers/usb/host/isp116x-hcd.c | 3 +-
drivers/usb/host/ohci-dbg.c | 6 +-
drivers/usb/host/ohci-hcd.c | 3 +-
drivers/usb/host/ohci-platform.c | 69 +-
drivers/usb/host/ohci-q.c | 3 +-
drivers/usb/host/ssb-hcd.c | 15 +-
drivers/usb/host/xhci-hub.c | 65 +-
drivers/usb/host/xhci-pci.c | 17 +-
drivers/usb/host/xhci-plat.c | 43 +-
drivers/usb/host/xhci-ring.c | 7 +-
drivers/usb/host/xhci.c | 44 +-
drivers/usb/host/xhci.h | 19 +-
drivers/usb/isp1760/isp1760-udc.c | 2 +
drivers/usb/misc/sisusbvga/sisusb.c | 39 +-
drivers/usb/misc/sisusbvga/sisusb_con.c | 54 +-
drivers/usb/misc/uss720.c | 6 +-
drivers/usb/mon/mon_bin.c | 7 +-
drivers/usb/mon/mon_main.c | 12 +-
drivers/usb/mon/mon_stat.c | 3 +-
drivers/usb/musb/am35x.c | 8 +-
drivers/usb/musb/blackfin.c | 5 +
drivers/usb/musb/cppi_dma.c | 9 +-
drivers/usb/musb/da8xx.c | 6 +-
drivers/usb/musb/davinci.c | 7 +-
drivers/usb/musb/jz4740.c | 6 +-
drivers/usb/musb/musb_core.c | 81 ++-
drivers/usb/musb/musb_core.h | 28 +-
drivers/usb/musb/musb_cppi41.c | 8 +-
drivers/usb/musb/musb_debugfs.c | 100 ++-
drivers/usb/musb/musb_dma.h | 67 +-
drivers/usb/musb/musb_dsps.c | 6 +-
drivers/usb/musb/musb_gadget.c | 24 +-
drivers/usb/musb/musb_host.c | 536 ++++++++------
drivers/usb/musb/musb_io.h | 2 +
drivers/usb/musb/musb_regs.h | 80 ++-
drivers/usb/musb/musb_virthub.c | 2 +
drivers/usb/musb/musbhsdma.c | 9 +-
drivers/usb/musb/omap2430.c | 5 +
drivers/usb/musb/tusb6010.c | 8 +-
drivers/usb/musb/tusb6010.h | 6 -
drivers/usb/musb/tusb6010_omap.c | 9 +-
drivers/usb/musb/ux500.c | 8 +-
drivers/usb/musb/ux500_dma.c | 8 +-
drivers/usb/phy/Kconfig | 16 +-
drivers/usb/phy/Makefile | 1 -
drivers/usb/phy/phy-ab8500-usb.c | 2 +-
drivers/usb/phy/phy-msm-usb.c | 110 +++
drivers/usb/phy/phy-rcar-gen2-usb.c | 246 -------
drivers/usb/phy/phy.c | 97 ++-
drivers/usb/renesas_usbhs/common.c | 19 +-
drivers/usb/renesas_usbhs/fifo.h | 9 +-
drivers/usb/renesas_usbhs/mod.c | 63 +-
drivers/usb/serial/mos7840.c | 11 +-
drivers/usb/storage/alauda.c | 12 +-
drivers/usb/storage/cypress_atacb.c | 10 +-
drivers/usb/storage/datafab.c | 12 +-
drivers/usb/storage/ene_ub6250.c | 11 +-
drivers/usb/storage/freecom.c | 12 +-
drivers/usb/storage/isd200.c | 11 +-
drivers/usb/storage/jumpshot.c | 11 +-
drivers/usb/storage/karma.c | 12 +-
drivers/usb/storage/onetouch.c | 12 +-
drivers/usb/storage/realtek_cr.c | 12 +-
drivers/usb/storage/scsiglue.c | 30 +-
drivers/usb/storage/scsiglue.h | 3 +-
drivers/usb/storage/sddr09.c | 12 +-
drivers/usb/storage/sddr55.c | 11 +-
drivers/usb/storage/shuttle_usbat.c | 12 +-
drivers/usb/storage/usb.c | 16 +-
drivers/usb/storage/usb.h | 16 +-
include/linux/fsl_devices.h | 1 +
include/linux/mod_devicetable.h | 6 +
include/linux/phy/phy-sun4i-usb.h | 26 +
include/linux/phy/phy.h | 9 +
include/linux/platform_data/usb-rcar-gen2-phy.h | 22 -
include/linux/ulpi/driver.h | 60 ++
include/linux/ulpi/interface.h | 23 +
include/linux/ulpi/regs.h | 130 ++++
include/linux/usb/hcd.h | 2 -
include/linux/usb/msm_hsusb.h | 22 +
include/linux/usb/msm_hsusb_hw.h | 9 +
include/linux/usb/net2280.h | 3 +
include/linux/usb/phy.h | 8 +
include/linux/usb/renesas_usbhs.h | 3 +-
include/linux/usb/ulpi.h | 134 +---
include/linux/usb/usb338x.h | 4 +
scripts/mod/devicetable-offsets.c | 4 +
scripts/mod/file2alias.c | 13 +
180 files changed, 5630 insertions(+), 2330 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-platform-twl4030-usb
create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt
create mode 100644 Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt
delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt
delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt
delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt
create mode 100644 drivers/phy/phy-brcmstb-sata.c
create mode 100644 drivers/phy/phy-pxa-28nm-hsic.c
create mode 100644 drivers/phy/phy-pxa-28nm-usb2.c
create mode 100644 drivers/phy/phy-tusb1210.c
create mode 100644 drivers/phy/ulpi_phy.h
create mode 100644 drivers/usb/common/ulpi.c
create mode 100644 drivers/usb/dwc2/debug.h
create mode 100644 drivers/usb/dwc2/debugfs.c
create mode 100644 drivers/usb/dwc3/ulpi.c
delete mode 100644 drivers/usb/phy/phy-rcar-gen2-usb.c
create mode 100644 include/linux/phy/phy-sun4i-usb.h
delete mode 100644 include/linux/platform_data/usb-rcar-gen2-phy.h
create mode 100644 include/linux/ulpi/driver.h
create mode 100644 include/linux/ulpi/interface.h
create mode 100644 include/linux/ulpi/regs.h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
