On Wed, Jun 24, 2015 at 11:04:43AM +0800, Peter Chen wrote: > On Wed, Jun 17, 2015 at 07:40:15PM +0800, Li Jun wrote: > > Set gadget's otg capabilities according to controller's capability and otg > > properties in device tree. > > > > Signed-off-by: Li Jun <jun.li@xxxxxxxxxxxxx> > > --- > > drivers/usb/chipidea/core.c | 8 ++++++++ > > drivers/usb/chipidea/udc.c | 7 ++++++- > > include/linux/usb/chipidea.h | 1 + > > 3 files changed, 15 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c > > index 74fea4f..2abecbc 100644 > > --- a/drivers/usb/chipidea/core.c > > +++ b/drivers/usb/chipidea/core.c > > @@ -588,6 +588,14 @@ static int ci_get_platdata(struct device *dev, > > of_usb_host_tpl_support(dev->of_node); > > } > > > > + if (platdata->dr_mode == USB_DR_MODE_OTG) { > > + /* We can support HNP and SRP */ > > + platdata->ci_otg_caps.hnp_support = true; > > + platdata->ci_otg_caps.srp_support = true; > > + /* Update otg capabilities by DT properties */ > > + of_usb_set_otg_caps(dev->of_node, &platdata->ci_otg_caps); > > + } > > + > > For current dual-role supported platforms (through ID pin), their dts has nothing > with otg capabilities, what will happen if we set .hnp_support as true? > No impact for them, those platforms will continue work as before(i.e. otg descriptor with HNP&SRP enabled if CONFIG_USB_OTG is selected, no otg fsm if CONFIG_USB_OTG_FSM is not selected). > For non-dt platform (eg i686), how it changes otg capabilities through > their platform data? > Directly override platdata->ci_otg_caps in its platform driver after ci_hdrc_add_device(). > Peter > > if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL) > > platdata->flags |= CI_HDRC_FORCE_FULLSPEED; > > > > diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c > > index 764f668..858bd21 100644 > > --- a/drivers/usb/chipidea/udc.c > > +++ b/drivers/usb/chipidea/udc.c > > @@ -1827,6 +1827,7 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci) > > static int udc_start(struct ci_hdrc *ci) > > { > > struct device *dev = ci->dev; > > + struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps; > > int retval = 0; > > > > spin_lock_init(&ci->lock); > > @@ -1834,8 +1835,12 @@ static int udc_start(struct ci_hdrc *ci) > > ci->gadget.ops = &usb_gadget_ops; > > ci->gadget.speed = USB_SPEED_UNKNOWN; > > ci->gadget.max_speed = USB_SPEED_HIGH; > > - ci->gadget.is_otg = ci->is_otg ? 1 : 0; > > ci->gadget.name = ci->platdata->name; > > + ci->gadget.otg_caps = otg_caps; > > + > > + if (otg_caps->otg_rev && (otg_caps->hnp_support || > > + otg_caps->srp_support || otg_caps->adp_support)) > > + ci->gadget.is_otg = 1; > > > > INIT_LIST_HEAD(&ci->gadget.ep_list); > > > > diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h > > index ab94f78..e10cefc 100644 > > --- a/include/linux/usb/chipidea.h > > +++ b/include/linux/usb/chipidea.h > > @@ -34,6 +34,7 @@ struct ci_hdrc_platform_data { > > #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 > > void (*notify_event) (struct ci_hdrc *ci, unsigned event); > > struct regulator *reg_vbus; > > + struct usb_otg_caps ci_otg_caps; > > bool tpl_support; > > }; > > > > -- > > 1.9.1 > > > > -- > > Best Regards, > Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html