+ Kukjin, Stephen, for board specific USB question. On Tue, 23 Jun 2015 16:35:49 +0800 Li Jun <b47624@xxxxxxxxxxxxx> wrote: > On Tue, Jun 23, 2015 at 10:43:28AM +0300, Roger Quadros wrote: > > > > > > > > If the dr_mode was "otg" for such case and we want OTG disabled then it is really the DT fault. > > > > > > It's ID pin detect for dual role switch as many current OTG controllers have. > > > not DT fault, its dt only has a dr_mode = "otg". > > > > > > > We don't need to tackle this case. Just fix up the DT to dr_mode = "peripheral" if > > > > OTG behaviour is not needed. > > > > > > > OTG behaviour is not needed, so we need disable HNP/SRP/ADP. but dr_mode = > > > "otg" as it already works fine with ID pin detect. > > > > Do you know which platform has plain non-otg dual-role working as of today > > with dr_mode set to "otg"? > > I don't know. > The dt property dr_mode is already there, and currently there are some platforms > as its user, so I assume those platforms either are non-otg dual-role, or real OTG > with HNP supported, I guess most are the former cases; chipidea is the later case. > > > For TI platforms none of them have it working currently. > > > So for Ti platforms, some enables non-otg dual-role function but do not use > dr_mode = "otg"? for TI we have only musb based and dwc3 based platforms. MUSB based are OTG. dwc3 doesn't support dual-role or OTG yet so we use either "peripheral" or "Host" > > For those only have non-otg dual-role platforms, no matter using dr_mode or not, > we need keep it's real OTG disabled for legacy users after it's controller > driver adds real OTG later. I wouldn't even bother about platforms expecting dual-role behaviour with dr_mode not set to "otg". That is just plain wrong and can't be supported. These are the dts files having dr_mode == "otg". I've sorted them as per Soc vendor and USB controller Freescale: ---------- powerpc/boot/dts/mpc5121.dtsi: dr_mode = "otg"; compatible = "fsl,mpc5121-usb2-dr"; powerpc/boot/dts/asp834x-redboot.dts: dr_mode = "otg"; compatible = "fsl-usb2-dr" powerpc/boot/dts/mpc834x_mds.dts: dr_mode = "otg"; compatible = "fsl-usb2-dr"; powerpc/boot/dts/mpc8349emitxgp.dts: dr_mode = "otg"; compatible = "fsl-usb2-dr"; arm/boot/dts/imx25-pdk.dts: dr_mode = "otg"; compatible = "fsl,imx25-usb", "fsl,imx27-usb"; arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts: dr_mode = "otg"; compatible = "fsl,imx25-usb", "fsl,imx27-usb"; arm/boot/dts/imx27-eukrea-cpuimx27.dtsi: dr_mode = "otg"; compatible = "fsl,imx27-usb"; arm/boot/dts/imx27-phytec-phycore-som.dtsi: dr_mode = "otg"; compatible = "fsl,imx27-usb"; arm/boot/dts/imx27-pdk.dts: dr_mode = "otg"; compatible = "fsl,imx27-usb"; arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts: dr_mode = "otg"; compatible = "fsl,imx35-usb", "fsl,imx27-usb"; arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts: dr_mode = "otg"; compatible = "fsl,imx51-usb", "fsl,imx27-usb"; arm/boot/dts/imx51-babbage.dts: dr_mode = "otg"; compatible = "fsl,imx51-usb", "fsl,imx27-usb"; arm/boot/dts/imx51-digi-connectcore-jsk.dts: dr_mode = "otg"; compatible = "fsl,imx51-usb", "fsl,imx27-usb"; arm/boot/dts/imx6dl-riotboard.dts: dr_mode = "otg"; compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; Li, can you please comment on all the above Freesacle platforms? STE: --- arm/boot/dts/ste-dbx5x0.dtsi: dr_mode = "otg"; compatible = "stericsson,db8500-musb"; MUSB so legacy OTG. TI: --- arm/boot/dts/am33xx.dtsi: dr_mode = "otg"; compatible = "ti,musb-am33xx"; MUSB so legacy OTG. arm/boot/dts/dra7.dtsi: dr_mode = "otg"; compatible = "snps,dwc3"; /* board dts overrides to dr_mode = "peripheral" or "host" */ arm/boot/dts/dra74x.dtsi: dr_mode = "otg"; compatible = "snps,dwc3"; /* board dts overrides to dr_mode = "peripheral" or "host" */ arm/boot/dts/am4372.dtsi: dr_mode = "otg"; compatible = "snps,dwc3"; /* board dts overrides to dr_mode = "peripheral" or "host" */ arm/boot/dts/am4372.dtsi: dr_mode = "otg"; compatible = "snps,dwc3"; /* board dts overrides to dr_mode = "peripheral" or "host" */ All these will eventually use dr_mode = "otg" with all 3 disable flags for simple dual-role operation. Samsung ------- arm/boot/dts/exynos5422-odroidxu3.dts: dr_mode = "otg"; compatible = "snps,dwc3"; I think that this board expects dual-role only behaviour. But that is not functional for DWC3. Kukjin/Felipe, any comment? Nvidia ------ arm/boot/dts/tegra20-seaboard.dts: dr_mode = "otg"; compatible = "nvidia,tegra20-ehci", "usb-ehci"; arm/boot/dts/tegra30-colibri-eval-v3.dts: dr_mode = "otg"; compatible = "nvidia,tegra30-ehci", "usb-ehci"; I couldn't find gadget side implementation for this. Stephen, any comments on whether this board supports true OTG operation or just dual-role operation? Cambridge Silicon ----------------- arm/boot/dts/atlas7.dtsi: dr_mode = "otg"; compatible = "sirf,atlas7-usb"; I couldn't find the USB controller driver for this. cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
