On Mon, 8 Jun 2015 23:02:02 +0800
Li Jun <jun.li@xxxxxxxxxxxxx> wrote:
> Set gadget's otg features according to controller's capability and usb
> property in device tree.
>
> Signed-off-by: Li Jun <jun.li@xxxxxxxxxxxxx>
> ---
> drivers/usb/chipidea/core.c | 16 ++++++++++++++++
> drivers/usb/chipidea/udc.c | 20 +++++++++++++++++++-
> include/linux/usb/chipidea.h | 4 ++++
> 3 files changed, 39 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 74fea4f..a8ca9d7 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -588,6 +588,22 @@ static int ci_get_platdata(struct device *dev,
> of_usb_host_tpl_support(dev->of_node);
> }
>
> + if (platdata->dr_mode == USB_DR_MODE_OTG) {
> + if (!platdata->otg_rev) {
> + platdata->otg_rev =
> + of_usb_otg_rev_number(dev->of_node);
> + }
> + if (!platdata->srp_support)
> + platdata->srp_support =
> + of_usb_otg_srp_support(dev->of_node);
> + if (!platdata->hnp_support)
> + platdata->hnp_support =
> + of_usb_otg_hnp_support(dev->of_node);
> + if (!platdata->adp_support)
> + platdata->adp_support =
> + of_usb_otg_adp_support(dev->of_node);
where do you check if the hardware really supports these features.
or is it that this hardware always supports these?
> + }
> +
> if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL)
> platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
>
> diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> index 764f668..5d2c6e8 100644
> --- a/drivers/usb/chipidea/udc.c
> +++ b/drivers/usb/chipidea/udc.c
> @@ -1821,6 +1821,24 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci)
> }
>
> /**
> + * udc_update_otg_config: update gadget otg config
> + * * @ci: chipidea controller
> + */
> +static void udc_update_otg_config(struct ci_hdrc *ci)
> +{
> + if (!ci->is_otg)
> + return;
> +
> + ci->gadget.otg_rev = ci->platdata->otg_rev;
> + ci->gadget.srp_support = ci->platdata->srp_support;
> + ci->gadget.hnp_support = ci->platdata->hnp_support;
> + ci->gadget.adp_support = ci->platdata->adp_support;
> + if (ci->gadget.srp_support || ci->gadget.hnp_support ||
> + ci->gadget.adp_support)
> + ci->gadget.is_otg = 1;
> +}
> +
> +/**
> * udc_start: initialize gadget role
> * @ci: chipidea controller
> */
> @@ -1834,9 +1852,9 @@ static int udc_start(struct ci_hdrc *ci)
> ci->gadget.ops = &usb_gadget_ops;
> ci->gadget.speed = USB_SPEED_UNKNOWN;
> ci->gadget.max_speed = USB_SPEED_HIGH;
> - ci->gadget.is_otg = ci->is_otg ? 1 : 0;
> ci->gadget.name = ci->platdata->name;
>
> + udc_update_otg_config(ci);
where is this function defined?
> INIT_LIST_HEAD(&ci->gadget.ep_list);
>
> /* alloc resources */
> diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> index ab94f78..c6aa3a4 100644
> --- a/include/linux/usb/chipidea.h
> +++ b/include/linux/usb/chipidea.h
> @@ -34,7 +34,11 @@ struct ci_hdrc_platform_data {
> #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
> void (*notify_event) (struct ci_hdrc *ci, unsigned event);
> struct regulator *reg_vbus;
> + unsigned otg_rev;
I think we should have a dedicated type of otg_rev instead of unsigned
because it is not plain integer but BCD.
> bool tpl_support;
> + bool srp_support;
> + bool hnp_support;
> + bool adp_support;
> };
>
> /* Default offset of capability registers */
cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
