Hi Greg,
Here's my giant pull request for v4.2 merge window.
This time "only" 96 non-merge commits. The important
stuff is listed below.
Let me know if you require any changes to the pull request.
cheers
The following changes since commit b787f68c36d49bb1d9236f403813641efa74a031:
Linux 4.1-rc1 (2015-04-26 17:59:10 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git tags/usb-for-v4.2
for you to fetch changes up to e18b7975c885bc3a938b9a76daf32957ea0235fa:
usb: dwc3: gadget: don't clear EP_BUSY too early (2015-05-29 10:19:51 -0500)
----------------------------------------------------------------
usb: patches for v4.2 merge window
- dwc2 adds hibernation support
- preparation for sunxi glue to musb driver
- new ULPI bus
- new ULPI PHY driver for TUSB1210
- musb patches to support multiple DMA engines on same binary
- support for R-Car E2 on renesas_usbhs
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
----------------------------------------------------------------
Andrzej Pietrasiewicz (6):
usb: gadget: rndis: use rndis_params instead of configNr
usb: gadget: rndis: style correction
usb: gadget: rndis: remove the limit of available rndis connections
usb: gadget: rndis: change the value passed to rndis_signal_(dis)connect()
usb: gadget: rndis: don't duplicate the "i" variable
usb: gadget: rndis: use signed type for a signed value
Arnd Bergmann (2):
usb: renesas_usbhs: avoid uninitialized variable use
usb: phy: add static inline wrapper for devm_usb_get_phy_by_node
Bin Liu (2):
usb: musb: only set test mode once
usb: musb: add softconnect for host mode
Felipe Balbi (6):
usb: dwc2: hcd: fix build warning
usb: gadget: atmel: fix build warning
usb: musb: am35x: fix build warnings
usb: musb: ux500: fix build warnings
usb: gadget: atmel: fix build warnings
usb: dwc3: gadget: don't clear EP_BUSY too early
Geert Uytterhoeven (2):
usb: phy: Remove the phy-rcar-gen2-usb driver
usb: phy: Allow compile test of GPIO consumers if !GPIOLIB
Gregory Herrero (15):
usb: dwc2: add controller hibernation support
usb: dwc2: implement hibernation during bus suspend/resume
usb: dwc2: controller must update lx_state before releasing lock
usb: dwc2: add external_id_pin_ctl core parameter
usb: dwc2: gadget: use reset detect interrupt
usb: dwc2: gadget: ignore pm suspend/resume in L2
usb: dwc2: gadget: prevent new request submission during suspend
usb: dwc2: gadget: powerup controller if needed
usb: dwc2: gadget: enable otg flag in dual role configuration
usb: dwc2: host: add bus_suspend/bus_resume callback
usb: dwc2: host: resume root hub on port connect
usb: dwc2: host: spinlock urb_enqueue
usb: dwc2: host: don't use dma_alloc_coherent with irqs disabled
usb: dwc2: add hibernation core parameter
usb: dwc2: host: ensure qtb exists before dereferencing it
Hans de Goede (6):
usb: musb: Add pre and post root port reset end callbacks
usb: musb: Make musb_write_rxfun* and musb_write_rxhub* work like their tx versions
usb: musb: Make busctl_offset an io-op rather then a define
usb: musb: Do not use musb_read[b|w] / _write[b|w] wrappers in generic fifo functions
usb: musb: Fix platform code being unable to override ep access ops
phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect
Heikki Krogerus (12):
usb: add bus type for USB ULPI
usb: dwc3: USB2 PHY register access bits
usb: dwc3: ULPI or UTMI+ select
usb: dwc3: store driver data earlier
usb: dwc3: cache hwparams earlier
usb: dwc3: soft reset to it's own function
usb: dwc3: setup phys earlier
usb: dwc3: add hsphy_interface property
usb: dwc3: pci: add quirk for Baytrails
usb: dwc3: add ULPI interface support
phy: helpers for USB ULPI PHY registering
phy: add driver for TI TUSB1210 ULPI PHY
Ivan T. Ivanov (2):
usb: phy: msm: Use extcon framework for VBUS and ID detection
usb: phy: msm: Manual PHY and LINK controller VBUS change notification
Jingwu Lin (1):
usb: dwc2: host: implement test mode
Joe Perches (1):
usb: gadget: s3c2410_udc: Remove static char buffer, use vsprintf extension %pV
Johan Hovold (1):
usb: musb: fix inefficient copy of unaligned buffers
Krzysztof Kozlowski (1):
usb: phy-ab8500-usb: Constify platform_device_id
Kuninori Morimoto (1):
usb: renesas_usbhs: tidyup usbhs_for_each_dfifo macro
Mian Yousaf Kaukab (16):
usb: dwc2: move debugfs code to a separate file
usb: dwc2: debugfs: add support for complete register dump
usb: dwc2: set parameter values in probe function
usb: dwc2: gadget: remove s3c_hsotg_ep_disable_force
usb: dwc2: host: register handle to the phy
usb: dwc2: remove dwc2_platform.ko
usb: gadget: net2280: fix ep_cfg for defect7374
usb: gadget: net2280: reset sequence number on ep enable
usb: gadget: net2280: unconditionally reset dma in usb_reset
usb: gadget: net2280: don't set ep_cfg.direction bit
usb: gadget: net2280: set all byte enables on start
usb: gadget: net2280: check interrupts for all endpoints
usb: gadget: net2280: fix use of GPEP in both directions
usb: gadget: autoconf: net2280: match hardware and usb ep address
usb: gadget: net2280: physically disable endpoint on disable operation
usb: gadget: net2280: fix pullup handling
NeilBrown (2):
usb: phy: Add interface to get phy give of device_node.
power: twl4030_charger: find associated phy by more reliable means.
Nobuhiro Iwamatsu (1):
usb: renesas_usbhs: Add access control for INTSTS1 and INTENB1 register
Peter Chen (1):
usb: Documentation: gadget-testing: fix parameter for capture channel mask
Peter Griffin (1):
usb: dwc3: dwc3-st: Update the incorrect DT dwc3 example.
Rui Miguel Silva (1):
usb: gadget: f_fs: add extra check before unregister_gadget_item
Subbaraya Sundeep Bhatta (2):
usb: dwc3: gadget: return error if command sent to DGCMD register fails
usb: dwc3: gadget: return error if command sent to DEPCMD register fails
Tony Lindgren (10):
usb: musb: Fix up DMA related macros
usb: musb: Set up function pointers for DMA
usb: musb: Get rid of the DMA ifdefs for musb_core.c
usb: musb: Remove DMA ifdef for musb_gadget.c short_packet
usb: musb: Remove ifdefs for TX DMA for musb_host.c
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part1
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part2
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part3
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part4
usb: musb: Remove ifdefs for musb_host_rx in musb_host.c part5
Wei Yongjun (1):
usb: gadget: uvc: remove unused including <linux/version.h>
Yoshihiro Shimoda (3):
usb: renesas_usbhs: Revise the binding document about the dma-names
usb: renesas_usbhs: Change USBHS_TYPE_R8A779x to USBHS_TYPE_RCAR_GEN2
usb: renesas_usbhs: Add support for R-Car E2
.../devicetree/bindings/power/twl-charger.txt | 10 +
Documentation/devicetree/bindings/usb/dwc3-st.txt | 7 +-
Documentation/devicetree/bindings/usb/dwc3.txt | 2 +
.../devicetree/bindings/usb/msm-hsusb.txt | 11 +
.../devicetree/bindings/usb/renesas_usbhs.txt | 7 +-
.../devicetree/bindings/usb/twlxxxx-usb.txt | 3 +
Documentation/usb/gadget-testing.txt | 4 +-
MAINTAINERS | 7 +
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-sun4i-usb.c | 9 +
drivers/phy/phy-tusb1210.c | 153 ++++
drivers/phy/ulpi_phy.h | 31 +
drivers/power/twl4030_charger.c | 21 +-
drivers/usb/common/Makefile | 1 +
drivers/usb/common/ulpi.c | 255 +++++++
drivers/usb/core/Kconfig | 20 +
drivers/usb/dwc2/Kconfig | 8 -
drivers/usb/dwc2/Makefile | 9 +-
drivers/usb/dwc2/core.c | 439 +++++++++++-
drivers/usb/dwc2/core.h | 120 +++-
drivers/usb/dwc2/core_intr.c | 45 +-
drivers/usb/dwc2/debug.h | 27 +
drivers/usb/dwc2/debugfs.c | 771 +++++++++++++++++++++
drivers/usb/dwc2/gadget.c | 459 ++----------
drivers/usb/dwc2/hcd.c | 100 +--
drivers/usb/dwc2/hcd.h | 7 +-
drivers/usb/dwc2/hcd_intr.c | 66 +-
drivers/usb/dwc2/hcd_queue.c | 18 +-
drivers/usb/dwc2/platform.c | 25 +-
drivers/usb/dwc3/Kconfig | 7 +
drivers/usb/dwc3/Makefile | 4 +
drivers/usb/dwc3/core.c | 108 ++-
drivers/usb/dwc3/core.h | 26 +
drivers/usb/dwc3/dwc3-pci.c | 36 +
drivers/usb/dwc3/gadget.c | 10 +-
drivers/usb/dwc3/platform_data.h | 2 +
drivers/usb/dwc3/ulpi.c | 91 +++
drivers/usb/gadget/epautoconf.c | 24 +-
drivers/usb/gadget/function/f_fs.c | 10 +-
drivers/usb/gadget/function/f_rndis.c | 60 +-
drivers/usb/gadget/function/rndis.c | 352 +++++-----
drivers/usb/gadget/function/rndis.h | 33 +-
drivers/usb/gadget/function/u_rndis.h | 2 -
drivers/usb/gadget/function/uvc.h | 1 -
drivers/usb/gadget/udc/atmel_usba_udc.c | 6 +-
drivers/usb/gadget/udc/net2280.c | 140 +++-
drivers/usb/gadget/udc/s3c2410_udc.c | 28 +-
drivers/usb/musb/am35x.c | 8 +-
drivers/usb/musb/blackfin.c | 5 +
drivers/usb/musb/cppi_dma.c | 9 +-
drivers/usb/musb/da8xx.c | 6 +-
drivers/usb/musb/davinci.c | 7 +-
drivers/usb/musb/jz4740.c | 6 +-
drivers/usb/musb/musb_core.c | 89 ++-
drivers/usb/musb/musb_core.h | 28 +-
drivers/usb/musb/musb_cppi41.c | 8 +-
drivers/usb/musb/musb_debugfs.c | 100 ++-
drivers/usb/musb/musb_dma.h | 67 +-
drivers/usb/musb/musb_dsps.c | 6 +-
drivers/usb/musb/musb_gadget.c | 24 +-
drivers/usb/musb/musb_host.c | 536 ++++++++------
drivers/usb/musb/musb_io.h | 2 +
drivers/usb/musb/musb_regs.h | 80 ++-
drivers/usb/musb/musb_virthub.c | 2 +
drivers/usb/musb/musbhsdma.c | 9 +-
drivers/usb/musb/omap2430.c | 5 +
drivers/usb/musb/tusb6010.c | 8 +-
drivers/usb/musb/tusb6010.h | 6 -
drivers/usb/musb/tusb6010_omap.c | 9 +-
drivers/usb/musb/ux500.c | 8 +-
drivers/usb/musb/ux500_dma.c | 8 +-
drivers/usb/phy/Kconfig | 16 +-
drivers/usb/phy/Makefile | 1 -
drivers/usb/phy/phy-ab8500-usb.c | 2 +-
drivers/usb/phy/phy-msm-usb.c | 110 +++
drivers/usb/phy/phy-rcar-gen2-usb.c | 246 -------
drivers/usb/phy/phy.c | 97 ++-
drivers/usb/renesas_usbhs/common.c | 19 +-
drivers/usb/renesas_usbhs/fifo.c | 24 +-
drivers/usb/renesas_usbhs/fifo.h | 9 +-
drivers/usb/renesas_usbhs/mod.c | 63 +-
include/linux/mod_devicetable.h | 6 +
include/linux/phy/phy-sun4i-usb.h | 26 +
include/linux/platform_data/usb-rcar-gen2-phy.h | 22 -
include/linux/ulpi/driver.h | 60 ++
include/linux/ulpi/interface.h | 23 +
include/linux/ulpi/regs.h | 130 ++++
include/linux/usb/msm_hsusb.h | 22 +
include/linux/usb/msm_hsusb_hw.h | 9 +
include/linux/usb/net2280.h | 3 +
include/linux/usb/phy.h | 8 +
include/linux/usb/renesas_usbhs.h | 3 +-
include/linux/usb/ulpi.h | 134 +---
include/linux/usb/usb338x.h | 4 +
scripts/mod/devicetable-offsets.c | 4 +
scripts/mod/file2alias.c | 13 +
97 files changed, 3966 insertions(+), 1707 deletions(-)
create mode 100644 drivers/phy/phy-tusb1210.c
create mode 100644 drivers/phy/ulpi_phy.h
create mode 100644 drivers/usb/common/ulpi.c
create mode 100644 drivers/usb/dwc2/debug.h
create mode 100644 drivers/usb/dwc2/debugfs.c
create mode 100644 drivers/usb/dwc3/ulpi.c
delete mode 100644 drivers/usb/phy/phy-rcar-gen2-usb.c
create mode 100644 include/linux/phy/phy-sun4i-usb.h
delete mode 100644 include/linux/platform_data/usb-rcar-gen2-phy.h
create mode 100644 include/linux/ulpi/driver.h
create mode 100644 include/linux/ulpi/interface.h
create mode 100644 include/linux/ulpi/regs.h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
