Hi
On Thu, May 28, 2015 at 01:42:07PM -0400, Alan Stern wrote:
> On Thu, 28 May 2015, Michael Trimarchi wrote:
>
> > Hi Alan
> >
> > we are working on a samsung exysnos5430 device and we have some problem
> > during suspend. The only way to solve it seems this patch.
> > We don't really know what could be the problem. Do you have any suggestion
> > to debug it?
> >
> > diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
> > index c254076..6b01784 100644
> > --- a/drivers/usb/host/ehci-hub.c
> > +++ b/drivers/usb/host/ehci-hub.c
> > @@ -289,14 +289,6 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
> >
> > if (t1 != t2) {
> > /*
> > + * When suspend bit for PORT 1 is set,
> > + * system halts when spin_unlock_irq()
> > + * called---> why????
> > + */
>
Ok I have done a small change in my config. I have removed the ohci-exynos
support from my config because. I have the hub connected to one port and
the 3g connected to another port. With this setup I don't need FS/LS support
at all and companion chip. With this config the problem disappear.
Michael
> You didn't say what your problem was, but I guess your system halts.
> Are you certain the halt occurs when spin_unlock_irq() is called? Did
> you put printk statements before and after that statement? Maybe the
> halt actually occurs later.
>
> I have no idea why suspending port 1 should cause the system to halt.
> Does the same problem occur with runtime PM?
>
> Alan Stern
>
> > + if (port == 0 && (t1 & 0x01)) {
> > + t2 &= ~PORT_SUSPEND;
> > + }
> > + /*
> > * On some controllers, Wake-On-Disconnect will
> > * generate false wakeup signals until the bus
> > * switches over to full-speed idle. For their
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
