This patch fixes an issue that sometimes this controller is not able to complete the Control write status stage. This driver should enable DCPCTR.CCPL and PID_BUF to complete the status stage. However, if this driver detects the ctrl_stage interruption first before the control write data is received, this driver will clear the PID_BUF wrongly in the usbhsf_pio_try_pop(). To avoid this issue, this patch doesn't clear the PID_BUF in the usbhsf_pio_try_pop(). (Since also the privious code doesn't disable the PID_BUF after a control transfer was finished, this patch doesn't have any side efforts.) Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> --- drivers/usb/renesas_usbhs/fifo.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index 0bad84e..c0f5c65 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -678,7 +678,14 @@ static int usbhsf_pio_try_pop(struct usbhs_pkt *pkt, int *is_done) *is_done = 1; usbhsf_rx_irq_ctrl(pipe, 0); usbhs_pipe_running(pipe, 0); - usbhs_pipe_disable(pipe); /* disable pipe first */ + /* + * If function mode, since this controller is possible to enter + * Control Write status stage at this timing, this driver + * should not disable the pipe. If such a case happens, this + * controller is not able to complete the status stage. + */ + if (!usbhs_mod_is_host(priv) && !usbhs_pipe_is_dcp(pipe)) + usbhs_pipe_disable(pipe); /* disable pipe first */ } /* -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
