Hi, > Ok, xhci is reset in resume in your case (indicated by the "root hub lost power or was reset" messages) > That patch adds an additional check that ensures there was some event before resuming the roothub. > > Could you try out the following and see if it helps? If the event is lost/cleared during reset > then this change should work. Sure. What version is this patch against? I did "patch -p1" with v4.1-rc2 checked out, and all three hunks fail. > Can you try with auto-pm disabled for PCI xHCI host? > > # echo 'on' | tee /sys/bus/pci/devices/*/power/control I'll also try the PM settings mentioned by baolu. In fact, he reminded me that I added the following udev rule to save some power (and powertop got happy ;-): ACTION=="add", SUBSYSTEM=="pci", ATTR{power/control}="auto" Sorry that I forgot to mention this. (I'll do all this tomorrow.) Kind regards, Ralf -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html