This patch implements device_suspend/device_resume entries for xHC driver.
device_suspend will be called when a USB device is about to suspend. It
will issue a stop endpoint command for each endpoint in this device. The
Suspend(SP) bit in the command TRB will set which will give xHC a hint
about the suspend. device_resume will be called when a USB device is just
resumed. It will ring doorbells of all endpoint unconditionally. XHC may
use these suspend/resume hints to optimize its operation.
Signed-off-by: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
---
drivers/usb/host/xhci-hub.c | 2 +-
drivers/usb/host/xhci.c | 38 ++++++++++++++++++++++++++++++++++++++
drivers/usb/host/xhci.h | 9 +++++++++
3 files changed, 48 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 0827d7c..a83e82e 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -266,7 +266,7 @@ int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
* to complete.
* suspend will set to 1, if suspend bit need to set in command.
*/
-static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
+int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
{
struct xhci_virt_device *virt_dev;
struct xhci_command *cmd;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index ec8ac16..330961d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4680,6 +4680,38 @@ int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
return ret;
return 0;
}
+
+/*
+ * xHCI compatible host controller driver expects to be notified prior to
+ * selectively suspending a device. xHCI hcd could optimize the endpoint
+ * cache for power saving purpose. Refer to 4.15.1.1 of xHCI 1.1.
+ */
+void xhci_device_suspend(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci;
+
+ xhci = hcd_to_xhci(hcd);
+ if (!xhci || !xhci->devs[udev->slot_id])
+ return;
+
+ xhci_stop_device(xhci, udev->slot_id, 1);
+}
+
+/*
+ * xHCI compatible host controller driver expects to be notified after a
+ * USB device is resumed. xHCI hcd could optimize the endpoint cache
+ * to reduce the latency. Refer to 4.15.1.1 of xHCI 1.1.
+ */
+void xhci_device_resume(struct usb_hcd *hcd, struct usb_device *udev)
+{
+ struct xhci_hcd *xhci;
+
+ xhci = hcd_to_xhci(hcd);
+ if (!xhci || !xhci->devs[udev->slot_id])
+ return;
+
+ xhci_ring_device(xhci, udev->slot_id);
+}
#else /* CONFIG_PM */
int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
@@ -4976,6 +5008,12 @@ static const struct hc_driver xhci_hc_driver = {
.enable_usb3_lpm_timeout = xhci_enable_usb3_lpm_timeout,
.disable_usb3_lpm_timeout = xhci_disable_usb3_lpm_timeout,
.find_raw_port_number = xhci_find_raw_port_number,
+
+ /*
+ * call back when devices suspend or resume
+ */
+ .device_suspend = xhci_device_suspend,
+ .device_resume = xhci_device_resume,
};
void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *))
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8e421b8..67c13c5 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1867,10 +1867,19 @@ u32 xhci_port_state_to_neutral(u32 state);
int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
u16 port);
void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
+int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend);
/* xHCI contexts */
struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_container_ctx *ctx);
struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
+#ifdef CONFIG_PM
+void xhci_device_suspend(struct usb_hcd *hcd, struct usb_device *udev);
+void xhci_device_resume(struct usb_hcd *hcd, struct usb_device *udev);
+#else
+#define xhci_device_suspend NULL
+#define xhci_device_resume NULL
+#endif /* CONFIG_PM */
+
#endif /* __LINUX_XHCI_HCD_H */
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
