[̈́PATCHv4 08/12] usb: dwc3: add hsphy_interface property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Platforms that have configured DWC_USB3_HSPHY_INTERFACE with
value 3, i.e. UTMI+ and ULPI, need to inform the driver of
the actual HSPHY interface type with the property. "utmi" if
the interface is UTMI+ or "ulpi" if the interface is ULPI.

Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Acked-by: David Cohen <david.a.cohen@xxxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/usb/dwc3.txt |  2 ++
 drivers/usb/dwc3/core.c                        | 20 ++++++++++++++++++++
 drivers/usb/dwc3/core.h                        |  3 +++
 drivers/usb/dwc3/platform_data.h               |  2 ++
 4 files changed, 27 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 5cc3643..0815eac 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -38,6 +38,8 @@ Optional properties:
  - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
 			utmi_l1_suspend_n, false when asserts utmi_sleep_n
  - snps,hird-threshold: HIRD threshold
+ - snps,hsphy_interface: High-Speed PHY interface selection between "utmi" for
+   UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3.
 
 This is usually a subnode to DWC3 glue to which it is connected.
 
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 6b02e12..0de8968 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -438,6 +438,22 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
 
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
 
+	/* Select the HS PHY interface */
+	switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
+	case DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI:
+		if (!strncmp(dwc->hsphy_interface, "utmi", 4)) {
+			reg &= ~DWC3_GUSB2PHYCFG_ULPI_UTMI;
+		} else if (!strncmp(dwc->hsphy_interface, "ulpi", 4)) {
+			reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
+		} else {
+			dev_warn(dwc->dev, "HSPHY Interface not defined\n");
+			break;
+		}
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+
 	/*
 	 * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
 	 * '0' during coreConsultant configuration. So default value will
@@ -844,6 +860,8 @@ static int dwc3_probe(struct platform_device *pdev)
 				"snps,tx_de_emphasis_quirk");
 		of_property_read_u8(node, "snps,tx_de_emphasis",
 				&tx_de_emphasis);
+		of_property_read_string(node, "snps,hsphy_interface",
+					&dwc->hsphy_interface);
 	} else if (pdata) {
 		dwc->maximum_speed = pdata->maximum_speed;
 		dwc->has_lpm_erratum = pdata->has_lpm_erratum;
@@ -871,6 +889,8 @@ static int dwc3_probe(struct platform_device *pdev)
 		dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk;
 		if (pdata->tx_de_emphasis)
 			tx_de_emphasis = pdata->tx_de_emphasis;
+
+		dwc->hsphy_interface = pdata->hsphy_interface;
 	}
 
 	/* default to superspeed if no maximum_speed passed */
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index c6eafaa..7b3ab64 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -682,6 +682,7 @@ struct dwc3_scratchpad_array {
  * @test_mode_nr: test feature selector
  * @lpm_nyet_threshold: LPM NYET response threshold
  * @hird_threshold: HIRD threshold
+ * @hsphy_interface: "utmi" or "ulpi"
  * @delayed_status: true when gadget driver asks for delayed status
  * @ep0_bounced: true when we used bounce buffer
  * @ep0_expect_in: true when we expect a DATA IN transfer
@@ -809,6 +810,8 @@ struct dwc3 {
 	u8			lpm_nyet_threshold;
 	u8			hird_threshold;
 
+	const char		*hsphy_interface;
+
 	unsigned		delayed_status:1;
 	unsigned		ep0_bounced:1;
 	unsigned		ep0_expect_in:1;
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index a2bd464..d3614ec 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -45,4 +45,6 @@ struct dwc3_platform_data {
 
 	unsigned tx_de_emphasis_quirk:1;
 	unsigned tx_de_emphasis:2;
+
+	const char *hsphy_interface;
 };
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux