Remove ifdefs for musb_host_rx to get closer to building in all the DMA drivers. Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> --- drivers/usb/musb/musb_host.c | 124 ++++++++++++++++++++++++++----------------- 1 file changed, 74 insertions(+), 50 deletions(-) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 739da2a..e2e7393 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1572,8 +1572,8 @@ static inline int musb_rx_dma_iso_cppi41(struct dma_controller *dma, } #endif -#ifdef CONFIG_USB_INVENTRA_DMA - +#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \ + defined(CONFIG_USB_TI_CPPI41_DMA) /* Host side RX (IN) using Mentor DMA works as follows: submit_urb -> - if queue was empty, ProgramEndpoint @@ -1608,7 +1608,68 @@ static inline int musb_rx_dma_iso_cppi41(struct dma_controller *dma, * thus be a great candidate for using mode 1 ... for all but the * last packet of one URB's transfer. */ +static int musb_rx_dma_inventra_cppi41(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, + struct musb_qh *qh, + struct urb *urb, + size_t len) +{ + struct dma_channel *channel = hw_ep->rx_channel; + void __iomem *epio = hw_ep->regs; + u16 val; + int pipe; + bool done; + + pipe = urb->pipe; + + if (usb_pipeisoc(pipe)) { + struct usb_iso_packet_descriptor *d; + + d = urb->iso_frame_desc + qh->iso_idx; + d->actual_length = len; + + /* even if there was an error, we did the dma + * for iso_frame_desc->length + */ + if (d->status != -EILSEQ && d->status != -EOVERFLOW) + d->status = 0; + + if (++qh->iso_idx >= urb->number_of_packets) { + done = true; + } else { + /* REVISIT: Why ignore return value here? */ + if (musb_dma_cppi41(hw_ep->musb)) + done = musb_rx_dma_iso_cppi41(dma, hw_ep, qh, + urb, len); + done = false; + } + + } else { + /* done if urb buffer is full or short packet is recd */ + done = (urb->actual_length + len >= + urb->transfer_buffer_length + || channel->actual_len < qh->maxpacket + || channel->rx_packet_done); + } + + /* send IN token for next packet, without AUTOREQ */ + if (!done) { + val = musb_readw(epio, MUSB_RXCSR); + val |= MUSB_RXCSR_H_REQPKT; + musb_writew(epio, MUSB_RXCSR, MUSB_RXCSR_H_WZC_BITS | val); + } + return done; +} +#else +static inline int musb_rx_dma_inventra_cppi41(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, + struct musb_qh *qh, + struct urb *urb, + size_t len) +{ + return false; +} #endif /* @@ -1619,6 +1680,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) { struct urb *urb; struct musb_hw_ep *hw_ep = musb->endpoints + epnum; + struct dma_controller *c = musb->dma_controller; void __iomem *epio = hw_ep->regs; struct musb_qh *qh = hw_ep->in_qh; size_t xfer_len; @@ -1766,56 +1828,18 @@ void musb_host_rx(struct musb *musb, u8 epnum) | MUSB_RXCSR_RXPKTRDY); musb_writew(hw_ep->regs, MUSB_RXCSR, val); -#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \ - defined(CONFIG_USB_TI_CPPI41_DMA) - if (usb_pipeisoc(pipe)) { - struct usb_iso_packet_descriptor *d; - - d = urb->iso_frame_desc + qh->iso_idx; - d->actual_length = xfer_len; - - /* even if there was an error, we did the dma - * for iso_frame_desc->length - */ - if (d->status != -EILSEQ && d->status != -EOVERFLOW) - d->status = 0; - - if (++qh->iso_idx >= urb->number_of_packets) { - done = true; - } else { - struct dma_controller *c = musb->dma_controller; - - /* REVISIT: Why ignore return value here? */ - if (musb_dma_cppi41(musb)) - done = musb_rx_dma_iso_cppi41(c, hw_ep, - qh, urb, - xfer_len); - - done = false; - } - - } else { - /* done if urb buffer is full or short packet is recd */ - done = (urb->actual_length + xfer_len >= - urb->transfer_buffer_length - || dma->actual_len < qh->maxpacket - || dma->rx_packet_done); - } - - /* send IN token for next packet, without AUTOREQ */ - if (!done) { - val |= MUSB_RXCSR_H_REQPKT; - musb_writew(epio, MUSB_RXCSR, - MUSB_RXCSR_H_WZC_BITS | val); + if (musb_dma_inventra(musb) || musb_dma_ux500(musb) || + musb_dma_cppi41(musb)) { + done = musb_rx_dma_inventra_cppi41(c, hw_ep, qh, urb, xfer_len); + dev_dbg(hw_ep->musb->controller, + "ep %d dma %s, rxcsr %04x, rxcount %d\n", + epnum, done ? "off" : "reset", + musb_readw(epio, MUSB_RXCSR), + musb_readw(epio, MUSB_RXCOUNT)); + } else { + done = true; } - dev_dbg(musb->controller, "ep %d dma %s, rxcsr %04x, rxcount %d\n", epnum, - done ? "off" : "reset", - musb_readw(epio, MUSB_RXCSR), - musb_readw(epio, MUSB_RXCOUNT)); -#else - done = true; -#endif } else if (urb->status == -EINPROGRESS) { /* if no errors, be sure a packet is ready for unloading */ if (unlikely(!(rx_csr & MUSB_RXCSR_RXPKTRDY))) { -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html