On Tue, Apr 28, 2015 at 12:17:34PM -0500, Felipe Balbi wrote: > Hi, > > On Tue, Apr 28, 2015 at 04:24:35PM +0300, Heikki Krogerus wrote: > > Hi, > > > > I took the liberty of adding David's ACK to everything except 9/12, including to > > the 1/12 (removing the module handling has no functional affect). > > > > Changes since v2: > > - remove module handling from the bus driver as suggested by Paul Bolle. > > - reordered the gpio requests in BYT quirk as suggested by David Cohen. > > > > Major changes since v1: > > - calling dwc3_phy_setup earlier and registering the ULPI interface there. > > - new property to dwc3 for selecting the interface in case of UTMI+ and ULPI as > > suggested by Felipe > > - dwc3 soft reset before registration of the ULPI interface to sync the clocks > > as suggested by David > > - Including support for the BYT boards that have the GPIOs controlling the reset > > and cs signals. > > > > Heikki Krogerus (12): > > usb: add bus type for USB ULPI > > usb: dwc3: USB2 PHY register access bits > > usb: dwc3: ULPI or UTMI+ select > > usb: dwc3: store driver data earlier > > usb: dwc3: cache hwparams earlier > > usb: dwc3: soft reset to it's own function > > usb: dwc3: setup phys earlier > > up to patch 7/12, I've applied to my testing/next. I'll wait for a > revised 8/12 before applying the rest. OK. I'll re-send the patches 8-12/12 here with the revised version of 8/12 and the missing 10/12 (usb: dwc3: add ULPI interface support). Thanks, -- heikki -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
