Fix some really minor coding-style issues.
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
drivers/usb/serial/f81232.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 68016e7a86f7..972f5a5fe577 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -32,14 +32,14 @@ static const struct usb_device_id id_table[] = {
MODULE_DEVICE_TABLE(usb, id_table);
/* Maximum baudrate for F81232 */
-#define F81232_MAX_BAUDRATE 115200
+#define F81232_MAX_BAUDRATE 115200
/* USB Control EP parameter */
-#define F81232_REGISTER_REQUEST 0xa0
+#define F81232_REGISTER_REQUEST 0xa0
#define F81232_GET_REGISTER 0xc0
#define F81232_SET_REGISTER 0x40
-#define SERIAL_BASE_ADDRESS 0x0120
+#define SERIAL_BASE_ADDRESS 0x0120
#define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS)
#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS)
#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS)
@@ -349,7 +349,8 @@ static void f81232_break_ctl(struct tty_struct *tty, int break_state)
static void f81232_set_baudrate(struct usb_serial_port *port, speed_t baudrate)
{
u8 lcr;
- int divisor, status = 0;
+ int divisor;
+ int status = 0;
divisor = calc_baud_divisor(baudrate);
@@ -666,7 +667,7 @@ static struct usb_serial_driver f81232_device = {
.bulk_out_size = 256,
.open = f81232_open,
.close = f81232_close,
- .dtr_rts = f81232_dtr_rts,
+ .dtr_rts = f81232_dtr_rts,
.carrier_raised = f81232_carrier_raised,
.ioctl = f81232_ioctl,
.break_ctl = f81232_break_ctl,
--
2.0.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
