From: Gregory Herrero <gregory.herrero@xxxxxxxxx>
This is required due to an Intel specific hardware issue. Where id-
pin setup causes glitches on the interrupt line when CONIDSTSCHG
interrupt is enabled.
Specify external_id_pin_ctl when an external driver (for example phy)
can handle id change, so that CONIDSTSCHG interrupt can be disabled
from the controller.
Signed-off-by: Gregory Herrero <gregory.herrero@xxxxxxxxx>
---
drivers/usb/dwc2/core.c | 22 +++++++++++++++++++++-
drivers/usb/dwc2/core.h | 6 ++++++
drivers/usb/dwc2/platform.c | 2 ++
3 files changed, 29 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 889dc5f..8c3bc84 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -454,8 +454,10 @@ static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg)
if (hsotg->core_params->dma_enable <= 0)
intmsk |= GINTSTS_RXFLVL;
+ if (hsotg->core_params->external_id_pin_ctl <= 0)
+ intmsk |= GINTSTS_CONIDSTSCHNG;
- intmsk |= GINTSTS_CONIDSTSCHNG | GINTSTS_WKUPINT | GINTSTS_USBSUSP |
+ intmsk |= GINTSTS_WKUPINT | GINTSTS_USBSUSP |
GINTSTS_SESSREQINT;
writel(intmsk, hsotg->regs + GINTMSK);
@@ -2979,6 +2981,23 @@ static void dwc2_set_param_uframe_sched(struct dwc2_hsotg *hsotg, int val)
hsotg->core_params->uframe_sched = val;
}
+static void dwc2_set_param_external_id_pin_ctl(struct dwc2_hsotg *hsotg,
+ int val)
+{
+ if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) {
+ if (val >= 0) {
+ dev_err(hsotg->dev,
+ "'%d' invalid for parameter external_id_pin_ctl\n",
+ val);
+ dev_err(hsotg->dev, "external_id_pin_ctl must be 0 or 1\n");
+ }
+ val = 0;
+ dev_dbg(hsotg->dev, "Setting external_id_pin_ctl to %d\n", val);
+ }
+
+ hsotg->core_params->external_id_pin_ctl = val;
+}
+
/*
* This function is called during module intialization to pass module parameters
* for the DWC_otg core.
@@ -3023,6 +3042,7 @@ void dwc2_set_parameters(struct dwc2_hsotg *hsotg,
dwc2_set_param_ahbcfg(hsotg, params->ahbcfg);
dwc2_set_param_otg_ver(hsotg, params->otg_ver);
dwc2_set_param_uframe_sched(hsotg, params->uframe_sched);
+ dwc2_set_param_external_id_pin_ctl(hsotg, params->external_id_pin_ctl);
}
/**
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index e6abc28..e46304d 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -331,6 +331,11 @@ enum dwc2_ep0_state {
* by the driver and are ignored in this
* configuration value.
* @uframe_sched: True to enable the microframe scheduler
+ * @external_id_pin_ctl: Specifies whether ID pin is handled externally.
+ * Disable CONIDSTSCHNG controller interrupt in such
+ * case.
+ * 0 - No (default)
+ * 1 - Yes
*
* The following parameters may be specified when starting the module. These
* parameters define how the DWC_otg controller should be configured. A
@@ -368,6 +373,7 @@ struct dwc2_core_params {
int reload_ctl;
int ahbcfg;
int uframe_sched;
+ int external_id_pin_ctl;
};
/**
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 4fb058b..ce39e8a0 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -77,6 +77,7 @@ static const struct dwc2_core_params params_bcm2835 = {
.reload_ctl = 0,
.ahbcfg = 0x10,
.uframe_sched = 0,
+ .external_id_pin_ctl = -1,
};
static const struct dwc2_core_params params_rk3066 = {
@@ -105,6 +106,7 @@ static const struct dwc2_core_params params_rk3066 = {
.reload_ctl = -1,
.ahbcfg = 0x7, /* INCR16 */
.uframe_sched = -1,
+ .external_id_pin_ctl = -1,
};
/**
--
2.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
