Le 18/03/2015 16:53, Ben Dooks a écrit : > Change from using the __raw IO accesors to the endian agnostic versions > of readl/writel_relaxed when not on AVR32. This fixes issues with running > big endian on ARMv7. > > Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx> > -- > CC: Nicolas Ferre <nicolas.ferre@xxxxxxxxx> Felipe, for the record: Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx> Thanks, bye. > CC: Felipe Balbi <balbi@xxxxxx> > CC: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> > CC: linux-usb@xxxxxxxxxxxxxxx > --- > drivers/usb/gadget/udc/atmel_usba_udc.c | 4 ++-- > drivers/usb/gadget/udc/atmel_usba_udc.h | 22 ++++++++++++++++------ > 2 files changed, 18 insertions(+), 8 deletions(-) > > diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c > index d79cb35..be2f503 100644 > --- a/drivers/usb/gadget/udc/atmel_usba_udc.c > +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c > @@ -152,7 +152,7 @@ static int regs_dbg_open(struct inode *inode, struct file *file) > > spin_lock_irq(&udc->lock); > for (i = 0; i < inode->i_size / 4; i++) > - data[i] = __raw_readl(udc->regs + i * 4); > + data[i] = usba_io_readl(udc->regs + i * 4); > spin_unlock_irq(&udc->lock); > > file->private_data = data; > @@ -1249,7 +1249,7 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep, > if (crq->wLength != cpu_to_le16(sizeof(status))) > goto stall; > ep->state = DATA_STAGE_IN; > - __raw_writew(status, ep->fifo); > + usba_io_writew(status, ep->fifo); > usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); > break; > } > diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h > index 497cd18..92bd486 100644 > --- a/drivers/usb/gadget/udc/atmel_usba_udc.h > +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h > @@ -191,18 +191,28 @@ > | USBA_BF(name, value)) > > /* Register access macros */ > +#ifdef CONFIG_AVR32 > +#define usba_io_readl __raw_readl > +#define usba_io_writel __raw_writel > +#define usba_io_writew __raw_writew > +#else > +#define usba_io_readl readl_relaxed > +#define usba_io_writel writel_relaxed > +#define usba_io_writew writew_relaxed > +#endif > + > #define usba_readl(udc, reg) \ > - __raw_readl((udc)->regs + USBA_##reg) > + usba_io_readl((udc)->regs + USBA_##reg) > #define usba_writel(udc, reg, value) \ > - __raw_writel((value), (udc)->regs + USBA_##reg) > + usba_io_writel((value), (udc)->regs + USBA_##reg) > #define usba_ep_readl(ep, reg) \ > - __raw_readl((ep)->ep_regs + USBA_EPT_##reg) > + usba_io_readl((ep)->ep_regs + USBA_EPT_##reg) > #define usba_ep_writel(ep, reg, value) \ > - __raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg) > + usba_io_writel((value), (ep)->ep_regs + USBA_EPT_##reg) > #define usba_dma_readl(ep, reg) \ > - __raw_readl((ep)->dma_regs + USBA_DMA_##reg) > + usba_io_readl((ep)->dma_regs + USBA_DMA_##reg) > #define usba_dma_writel(ep, reg, value) \ > - __raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg) > + usba_io_writel((value), (ep)->dma_regs + USBA_DMA_##reg) > > /* Calculate base address for a given endpoint or DMA controller */ > #define USBA_EPT_BASE(x) (0x100 + (x) * 0x20) > -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
