This commit adds new register values for the USB_CMD and USB_MODE registers, which allows to avoid the usage of a number of magic values in orion_usb_phy_v1_setup(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> --- drivers/usb/host/ehci-orion.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index f6eafec..0feca8a 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -29,7 +29,13 @@ #define wrl(off, val) writel_relaxed((val), hcd->regs + (off)) #define USB_CMD 0x140 +#define USB_CMD_RUN BIT(0) +#define USB_CMD_RESET BIT(1) #define USB_MODE 0x1a8 +#define USB_MODE_MASK GENMASK(1, 0) +#define USB_MODE_DEVICE 0x2 +#define USB_MODE_HOST 0x3 +#define USB_MODE_SDIS BIT(4) #define USB_CAUSE 0x310 #define USB_MASK 0x314 #define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4)) @@ -69,8 +75,8 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) /* * Reset controller */ - wrl(USB_CMD, rdl(USB_CMD) | 0x2); - while (rdl(USB_CMD) & 0x2); + wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET); + while (rdl(USB_CMD) & USB_CMD_RESET); /* * GL# USB-10: Set IPG for non start of frame packets @@ -112,16 +118,16 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) /* * Stop and reset controller */ - wrl(USB_CMD, rdl(USB_CMD) & ~0x1); - wrl(USB_CMD, rdl(USB_CMD) | 0x2); - while (rdl(USB_CMD) & 0x2); + wrl(USB_CMD, rdl(USB_CMD) & ~USB_CMD_RUN); + wrl(USB_CMD, rdl(USB_CMD) | USB_CMD_RESET); + while (rdl(USB_CMD) & USB_CMD_RESET); /* * GL# USB-5 Streaming disable REG_USB_MODE[4]=1 * TBD: This need to be done after each reset! * GL# USB-4 Setup USB Host mode */ - wrl(USB_MODE, 0x13); + wrl(USB_MODE, USB_MODE_SDIS | USB_MODE_HOST); } static void -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
