On Wed, Mar 18, 2015 at 10:12:13AM -0700, David Cohen wrote: > Hi, > > On Wed, Mar 18, 2015 at 02:40:21PM +0200, Heikki Krogerus wrote: > > > > Major changes since v1: > > - calling dwc3_phy_setup earlier and registering the ULPI interface there. > > - new property to dwc3 for selecting the interface in case of UTMI+ and ULPI as > > suggested by Felipe > > - dwc3 soft reset before registration of the ULPI interface to sync the clocks > > as suggested by David > > - Including support for the BYT boards that have the GPIOs controlling the reset > > and cs signals. > > > > > > Heikki Krogerus (12): > > usb: add bus type for USB ULPI > > usb: dwc3: USB2 PHY register access bits > > usb: dwc3: ULPI or UTMI+ select > > usb: dwc3: store driver data earlier > > usb: dwc3: cache hwparams earlier > > usb: dwc3: soft reset to it's own function > > usb: dwc3: setup phys earlier > > usb: dwc3: add hsphy_interface property > > usb: dwc3: pci: add quirk for Baytrails > > usb: dwc3: add ULPI interface support > > phy: helpers for USB ULPI PHY registering > > phy: add driver for TI TUSB1210 ULPI PHY > > Except for my comment on patch "9/12", this version looks fine on my > side. Making things official. For the whole series (except 9/12): Acked-by: David Cohen <david.a.cohen@xxxxxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
