Platforms that have configured DWC_USB3_HSPHY_INTERFACE with
value 3, i.e. UTMI+ and ULPI, need to inform the driver of
the actual HSPHY interface type with the property. "utmi" if
the interface is UTMI+ or "ulpi" if the interface is ULPI.
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
drivers/usb/dwc3/core.c | 29 ++++++++++++++++++++++++--
drivers/usb/dwc3/core.h | 3 +++
drivers/usb/dwc3/platform_data.h | 2 ++
4 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 5cc3643..0815eac 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -38,6 +38,8 @@ Optional properties:
- snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
utmi_l1_suspend_n, false when asserts utmi_sleep_n
- snps,hird-threshold: HIRD threshold
+ - snps,hsphy_interface: High-Speed PHY interface selection between "utmi" for
+ UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3.
This is usually a subnode to DWC3 glue to which it is connected.
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 6b02e12..b229ba1 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -395,9 +395,10 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc)
* dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
* @dwc: Pointer to our controller context structure
*/
-static void dwc3_phy_setup(struct dwc3 *dwc)
+static int dwc3_phy_setup(struct dwc3 *dwc)
{
u32 reg;
+ int ret;
reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
@@ -438,6 +439,22 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+ /* Select the HS PHY interface */
+ switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
+ case DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI:
+ if (!strncmp(dwc->hsphy_interface, "utmi", 4)) {
+ reg &= ~DWC3_GUSB2PHYCFG_ULPI_UTMI;
+ } else if (!strncmp(dwc->hsphy_interface, "ulpi", 4)) {
+ reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
+ } else {
+ dev_err(dwc->dev, "HSPHY Interface not defined\n");
+ return -EINVAL;
+ }
+ /* FALLTHROUGH */
+ default:
+ break;
+ }
+
/*
* Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
* '0' during coreConsultant configuration. So default value will
@@ -451,6 +468,8 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+
+ return 0;
}
/**
@@ -844,6 +863,8 @@ static int dwc3_probe(struct platform_device *pdev)
"snps,tx_de_emphasis_quirk");
of_property_read_u8(node, "snps,tx_de_emphasis",
&tx_de_emphasis);
+ of_property_read_string(node, "snps,hsphy_interface",
+ &dwc->hsphy_interface);
} else if (pdata) {
dwc->maximum_speed = pdata->maximum_speed;
dwc->has_lpm_erratum = pdata->has_lpm_erratum;
@@ -871,6 +892,8 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk;
if (pdata->tx_de_emphasis)
tx_de_emphasis = pdata->tx_de_emphasis;
+
+ dwc->hsphy_interface = pdata->hsphy_interface;
}
/* default to superspeed if no maximum_speed passed */
@@ -886,7 +909,9 @@ static int dwc3_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dwc);
dwc3_cache_hwparams(dwc);
- dwc3_phy_setup(dwc);
+ ret = dwc3_phy_setup(dwc);
+ if (ret)
+ goto err0;
ret = dwc3_core_get_phy(dwc);
if (ret)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index c6eafaa..7b3ab64 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -682,6 +682,7 @@ struct dwc3_scratchpad_array {
* @test_mode_nr: test feature selector
* @lpm_nyet_threshold: LPM NYET response threshold
* @hird_threshold: HIRD threshold
+ * @hsphy_interface: "utmi" or "ulpi"
* @delayed_status: true when gadget driver asks for delayed status
* @ep0_bounced: true when we used bounce buffer
* @ep0_expect_in: true when we expect a DATA IN transfer
@@ -809,6 +810,8 @@ struct dwc3 {
u8 lpm_nyet_threshold;
u8 hird_threshold;
+ const char *hsphy_interface;
+
unsigned delayed_status:1;
unsigned ep0_bounced:1;
unsigned ep0_expect_in:1;
diff --git a/drivers/usb/dwc3/platform_data.h b/drivers/usb/dwc3/platform_data.h
index a2bd464..d3614ec 100644
--- a/drivers/usb/dwc3/platform_data.h
+++ b/drivers/usb/dwc3/platform_data.h
@@ -45,4 +45,6 @@ struct dwc3_platform_data {
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
+
+ const char *hsphy_interface;
};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
