On Sun, Mar 01, 2015 at 01:47:22PM -0500, Nicolas PLANEL wrote:
> The ch341_set_baudrate() function initialize the device baud speed
> according to the value on priv->baud_rate. By default the ch341_open() set
> it to a hardcoded value (DEFAULT_BAUD_RATE 9600). Unfortunately, the
> tty_struct is not initialized with the same default value. (usually 56700)
>
> This means that the tty_struct and the device baud rate generator are not
> synchronized after opening the port.
>
> Fixup is done by calling ch341_set_termios() if tty exist.
> Remove unnecessary variable priv->baud_rate setup as it's already done by
> ch341_port_probe().
> Remove unnecessary call to ch341_set_{handshake,baudrate}() in
> ch341_open() as there already called in ch341_configure() and
> ch341_set_termios()
>
> Signed-off-by: Nicolas PLANEL <nicolas.planel@xxxxxxxxxxxx>
Now applied, thanks for fixing this.
Johan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
