On Tue, Feb 24, 2015 at 11:33:57AM -0600, Felipe Balbi wrote: > Hi, > > On Tue, Feb 24, 2015 at 05:50:50PM +0100, Maxime Ripard wrote: > > Hi Felipe, > > > > On Tue, Feb 24, 2015 at 08:54:01AM -0600, Felipe Balbi wrote: > > > Hi, > > > > > > On Tue, Feb 24, 2015 at 11:39:11AM +0100, Maxime Ripard wrote: > > > > On Thu, Feb 05, 2015 at 02:21:42PM +0100, Maxime Ripard wrote: > > > > > Hi, > > > > > > > > > > On Thu, Jan 22, 2015 at 08:37:45AM +0100, Yegor Yefremov wrote: > > > > > > I have the same experience with 3.15. The switching is working when > > > > > > CONFIG_USB_MUSB_DUAL_ROLE is set and dr_mode = "otg". But since 3.16 > > since 3.16 ? That's what Yegor said. I never saw it working with 3.15 either. > > > > > > it seems to be broken. Still had no time to bisect this. > > > > > > > > > > I've been giving a few versions (from v3.15 to Tuesday's linux-next) a > > > > > try, and I always see the same behaviour now: > > > > > > > > > > - Booting as a gadget (ie, with a USB cable plugged in), and > > > > > swapping the cable for a (real, this time) USB OTG cable with a > > > > > USB key never works. When the device is plugged, all I get is > > > > > > > > > > [ 262.944846] usb 1-1: new high-speed USB device number 2 using musb-hdrc > > > > > [ 278.064748] usb 1-1: device descriptor read/64, error -110 > > > > > > > > > > Putting in back in gadget results with a load of continuous: > > > > > [ 315.258839] musb_bus_suspend 2484: trying to suspend as a_wait_vfall while active > > > > > > > > > > - Booting as a host, or with nothing connected to it actually work, > > > > > up to a few plug-a-device-then-plug-a-host cycles, where you end > > > > > up with the following logs when disconnecting the device (somehow, > > > > > it always happens when it is set in host mode). > > > > > > > > > > [ 12.969075] CAUTION: musb: Babble Interrupt Occurred > > > > > [ 12.974445] CAUTION: musb: Babble Interrupt Occurred > > > > > [ 12.979637] musb_stage0_irq 789: unhandled DISCONNECT transition (a_wait_bcon) > > > > > [ 12.988498] usb 1-1: USB disconnect, device number 2 > > > > > [ 13.071849] musb-hdrc musb-hdrc.0.auto: Restarting MUSB to recover from Babble > > > > > > > > > > Plugging back our USB cable, with the AM335x acting as a device > > > > > work once. Then, when it switches to the host mode, we end up with > > > > > the same scenario than in the coldplug as gadget case: USB read > > > > > error, before then having all the a_wait_vfall messages. > > > > > > > > Guys, any ideas/hints? > > > > > > which platform are you using ? I guess the only way to move here would > > > be to bisect between 3.15 and 3.16 to find the offending commit. > > > > 3.15 didn't work either unfortunately. I had the behaviour described > > above on all kernel between 3.15 and a 4.0-rc1-ish. > > > > This is on an custom design based on the am335x. > > has it ever worked ? I don't have a board here which can do dual role. > BBB has a mini-B only on the peripheral port. I don't know if it ever worked. Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com
Attachment:
signature.asc
Description: Digital signature
