[PATCH 24/29] usb: gadget: printer: factor out f_printer

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The legacy printer gadget now contains both a reusable printer function
and legacy gadget proper implementations interwoven, but logically
separate. This patch factors out a reusable f_printer.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
---
 drivers/usb/gadget/function/f_printer.c | 1280 +++++++++++++++++++++++++++++++
 drivers/usb/gadget/legacy/printer.c     | 1256 +-----------------------------
 2 files changed, 1286 insertions(+), 1250 deletions(-)
 create mode 100644 drivers/usb/gadget/function/f_printer.c

diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
new file mode 100644
index 0000000..7474eae
--- /dev/null
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -0,0 +1,1280 @@
+/*
+ * f_printer.c - USB printer function driver
+ *
+ * Copied from drivers/usb/gadget/legacy/printer.c,
+ * which was:
+ *
+ * printer.c -- Printer gadget driver
+ *
+ * Copyright (C) 2003-2005 David Brownell
+ * Copyright (C) 2006 Craig W. Nadler
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/cdev.h>
+
+#include <asm/byteorder.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/composite.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/g_printer.h>
+
+#define PNP_STRING_LEN		1024
+#define PRINTER_MINORS		4
+#define GET_DEVICE_ID		0
+#define GET_PORT_STATUS		1
+#define SOFT_RESET		2
+
+static int major, minors;
+static struct class *usb_gadget_class;
+
+/*-------------------------------------------------------------------------*/
+
+struct printer_dev {
+	spinlock_t		lock;		/* lock this structure */
+	/* lock buffer lists during read/write calls */
+	struct mutex		lock_printer_io;
+	struct usb_gadget	*gadget;
+	s8			interface;
+	struct usb_ep		*in_ep, *out_ep;
+
+	struct list_head	rx_reqs;	/* List of free RX structs */
+	struct list_head	rx_reqs_active;	/* List of Active RX xfers */
+	struct list_head	rx_buffers;	/* List of completed xfers */
+	/* wait until there is data to be read. */
+	wait_queue_head_t	rx_wait;
+	struct list_head	tx_reqs;	/* List of free TX structs */
+	struct list_head	tx_reqs_active; /* List of Active TX xfers */
+	/* Wait until there are write buffers available to use. */
+	wait_queue_head_t	tx_wait;
+	/* Wait until all write buffers have been sent. */
+	wait_queue_head_t	tx_flush_wait;
+	struct usb_request	*current_rx_req;
+	size_t			current_rx_bytes;
+	u8			*current_rx_buf;
+	u8			printer_status;
+	u8			reset_printer;
+	int			minor;
+	struct cdev		printer_cdev;
+	u8			printer_cdev_open;
+	wait_queue_head_t	wait;
+	unsigned		q_len;
+	char			*pnp_string;	/* We don't own memory! */
+	struct usb_function	function;
+};
+
+static inline struct printer_dev *func_to_printer(struct usb_function *f)
+{
+	return container_of(f, struct printer_dev, function);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full) configuration
+ * descriptors are built on demand.
+ */
+
+/* holds our biggest descriptor */
+#define USB_DESC_BUFSIZE		256
+#define USB_BUFSIZE			8192
+
+static struct usb_interface_descriptor intf_desc = {
+	.bLength =		sizeof(intf_desc),
+	.bDescriptorType =	USB_DT_INTERFACE,
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_PRINTER,
+	.bInterfaceSubClass =	1,	/* Printer Sub-Class */
+	.bInterfaceProtocol =	2,	/* Bi-Directional */
+	.iInterface =		0
+};
+
+static struct usb_endpoint_descriptor fs_ep_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK
+};
+
+static struct usb_endpoint_descriptor fs_ep_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK
+};
+
+static struct usb_descriptor_header *fs_printer_function[] = {
+	(struct usb_descriptor_header *) &intf_desc,
+	(struct usb_descriptor_header *) &fs_ep_in_desc,
+	(struct usb_descriptor_header *) &fs_ep_out_desc,
+	NULL
+};
+
+/*
+ * usb 2.0 devices need to expose both high speed and full speed
+ * descriptors, unless they only run at full speed.
+ */
+
+static struct usb_endpoint_descriptor hs_ep_in_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512)
+};
+
+static struct usb_endpoint_descriptor hs_ep_out_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512)
+};
+
+static struct usb_qualifier_descriptor dev_qualifier = {
+	.bLength =		sizeof(dev_qualifier),
+	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
+	.bcdUSB =		cpu_to_le16(0x0200),
+	.bDeviceClass =		USB_CLASS_PRINTER,
+	.bNumConfigurations =	1
+};
+
+static struct usb_descriptor_header *hs_printer_function[] = {
+	(struct usb_descriptor_header *) &intf_desc,
+	(struct usb_descriptor_header *) &hs_ep_in_desc,
+	(struct usb_descriptor_header *) &hs_ep_out_desc,
+	NULL
+};
+
+/*
+ * Added endpoint descriptors for 3.0 devices
+ */
+
+static struct usb_endpoint_descriptor ss_ep_in_desc = {
+	.bLength =              USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =      USB_DT_ENDPOINT,
+	.bmAttributes =         USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =       cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ep_in_comp_desc = {
+	.bLength =              sizeof(ss_ep_in_comp_desc),
+	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_endpoint_descriptor ss_ep_out_desc = {
+	.bLength =              USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =      USB_DT_ENDPOINT,
+	.bmAttributes =         USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =       cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor ss_ep_out_comp_desc = {
+	.bLength =              sizeof(ss_ep_out_comp_desc),
+	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_descriptor_header *ss_printer_function[] = {
+	(struct usb_descriptor_header *) &intf_desc,
+	(struct usb_descriptor_header *) &ss_ep_in_desc,
+	(struct usb_descriptor_header *) &ss_ep_in_comp_desc,
+	(struct usb_descriptor_header *) &ss_ep_out_desc,
+	(struct usb_descriptor_header *) &ss_ep_out_comp_desc,
+	NULL
+};
+
+/* maxpacket and other transfer characteristics vary by speed. */
+static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
+					struct usb_endpoint_descriptor *fs,
+					struct usb_endpoint_descriptor *hs,
+					struct usb_endpoint_descriptor *ss)
+{
+	switch (gadget->speed) {
+	case USB_SPEED_SUPER:
+		return ss;
+	case USB_SPEED_HIGH:
+		return hs;
+	default:
+		return fs;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_request *
+printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
+{
+	struct usb_request	*req;
+
+	req = usb_ep_alloc_request(ep, gfp_flags);
+
+	if (req != NULL) {
+		req->length = len;
+		req->buf = kmalloc(len, gfp_flags);
+		if (req->buf == NULL) {
+			usb_ep_free_request(ep, req);
+			return NULL;
+		}
+	}
+
+	return req;
+}
+
+static void
+printer_req_free(struct usb_ep *ep, struct usb_request *req)
+{
+	if (ep != NULL && req != NULL) {
+		kfree(req->buf);
+		usb_ep_free_request(ep, req);
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void rx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct printer_dev	*dev = ep->driver_data;
+	int			status = req->status;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	list_del_init(&req->list);	/* Remode from Active List */
+
+	switch (status) {
+
+	/* normal completion */
+	case 0:
+		if (req->actual > 0) {
+			list_add_tail(&req->list, &dev->rx_buffers);
+			DBG(dev, "G_Printer : rx length %d\n", req->actual);
+		} else {
+			list_add(&req->list, &dev->rx_reqs);
+		}
+		break;
+
+	/* software-driven interface shutdown */
+	case -ECONNRESET:		/* unlink */
+	case -ESHUTDOWN:		/* disconnect etc */
+		VDBG(dev, "rx shutdown, code %d\n", status);
+		list_add(&req->list, &dev->rx_reqs);
+		break;
+
+	/* for hardware automagic (such as pxa) */
+	case -ECONNABORTED:		/* endpoint reset */
+		DBG(dev, "rx %s reset\n", ep->name);
+		list_add(&req->list, &dev->rx_reqs);
+		break;
+
+	/* data overrun */
+	case -EOVERFLOW:
+		/* FALLTHROUGH */
+
+	default:
+		DBG(dev, "rx status %d\n", status);
+		list_add(&req->list, &dev->rx_reqs);
+		break;
+	}
+
+	wake_up_interruptible(&dev->rx_wait);
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+static void tx_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct printer_dev	*dev = ep->driver_data;
+
+	switch (req->status) {
+	default:
+		VDBG(dev, "tx err %d\n", req->status);
+		/* FALLTHROUGH */
+	case -ECONNRESET:		/* unlink */
+	case -ESHUTDOWN:		/* disconnect etc */
+		break;
+	case 0:
+		break;
+	}
+
+	spin_lock(&dev->lock);
+	/* Take the request struct off the active list and put it on the
+	 * free list.
+	 */
+	list_del_init(&req->list);
+	list_add(&req->list, &dev->tx_reqs);
+	wake_up_interruptible(&dev->tx_wait);
+	if (likely(list_empty(&dev->tx_reqs_active)))
+		wake_up_interruptible(&dev->tx_flush_wait);
+
+	spin_unlock(&dev->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+printer_open(struct inode *inode, struct file *fd)
+{
+	struct printer_dev	*dev;
+	unsigned long		flags;
+	int			ret = -EBUSY;
+
+	dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	if (!dev->printer_cdev_open) {
+		dev->printer_cdev_open = 1;
+		fd->private_data = dev;
+		ret = 0;
+		/* Change the printer status to show that it's on-line. */
+		dev->printer_status |= PRINTER_SELECTED;
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	DBG(dev, "printer_open returned %x\n", ret);
+	return ret;
+}
+
+static int
+printer_close(struct inode *inode, struct file *fd)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+
+	spin_lock_irqsave(&dev->lock, flags);
+	dev->printer_cdev_open = 0;
+	fd->private_data = NULL;
+	/* Change printer status to show that the printer is off-line. */
+	dev->printer_status &= ~PRINTER_SELECTED;
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	DBG(dev, "printer_close\n");
+
+	return 0;
+}
+
+/* This function must be called with interrupts turned off. */
+static void
+setup_rx_reqs(struct printer_dev *dev)
+{
+	struct usb_request              *req;
+
+	while (likely(!list_empty(&dev->rx_reqs))) {
+		int error;
+
+		req = container_of(dev->rx_reqs.next,
+				struct usb_request, list);
+		list_del_init(&req->list);
+
+		/* The USB Host sends us whatever amount of data it wants to
+		 * so we always set the length field to the full USB_BUFSIZE.
+		 * If the amount of data is more than the read() caller asked
+		 * for it will be stored in the request buffer until it is
+		 * asked for by read().
+		 */
+		req->length = USB_BUFSIZE;
+		req->complete = rx_complete;
+
+		/* here, we unlock, and only unlock, to avoid deadlock. */
+		spin_unlock(&dev->lock);
+		error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
+		spin_lock(&dev->lock);
+		if (error) {
+			DBG(dev, "rx submit --> %d\n", error);
+			list_add(&req->list, &dev->rx_reqs);
+			break;
+		}
+		/* if the req is empty, then add it into dev->rx_reqs_active. */
+		else if (list_empty(&req->list))
+			list_add(&req->list, &dev->rx_reqs_active);
+	}
+}
+
+static ssize_t
+printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
+{
+	struct printer_dev		*dev = fd->private_data;
+	unsigned long			flags;
+	size_t				size;
+	size_t				bytes_copied;
+	struct usb_request		*req;
+	/* This is a pointer to the current USB rx request. */
+	struct usb_request		*current_rx_req;
+	/* This is the number of bytes in the current rx buffer. */
+	size_t				current_rx_bytes;
+	/* This is a pointer to the current rx buffer. */
+	u8				*current_rx_buf;
+
+	if (len == 0)
+		return -EINVAL;
+
+	DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
+
+	mutex_lock(&dev->lock_printer_io);
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* We will use this flag later to check if a printer reset happened
+	 * after we turn interrupts back on.
+	 */
+	dev->reset_printer = 0;
+
+	setup_rx_reqs(dev);
+
+	bytes_copied = 0;
+	current_rx_req = dev->current_rx_req;
+	current_rx_bytes = dev->current_rx_bytes;
+	current_rx_buf = dev->current_rx_buf;
+	dev->current_rx_req = NULL;
+	dev->current_rx_bytes = 0;
+	dev->current_rx_buf = NULL;
+
+	/* Check if there is any data in the read buffers. Please note that
+	 * current_rx_bytes is the number of bytes in the current rx buffer.
+	 * If it is zero then check if there are any other rx_buffers that
+	 * are on the completed list. We are only out of data if all rx
+	 * buffers are empty.
+	 */
+	if ((current_rx_bytes == 0) &&
+			(likely(list_empty(&dev->rx_buffers)))) {
+		/* Turn interrupts back on before sleeping. */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		/*
+		 * If no data is available check if this is a NON-Blocking
+		 * call or not.
+		 */
+		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		/* Sleep until data is available */
+		wait_event_interruptible(dev->rx_wait,
+				(likely(!list_empty(&dev->rx_buffers))));
+		spin_lock_irqsave(&dev->lock, flags);
+	}
+
+	/* We have data to return then copy it to the caller's buffer.*/
+	while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers)))
+			&& len) {
+		if (current_rx_bytes == 0) {
+			req = container_of(dev->rx_buffers.next,
+					struct usb_request, list);
+			list_del_init(&req->list);
+
+			if (req->actual && req->buf) {
+				current_rx_req = req;
+				current_rx_bytes = req->actual;
+				current_rx_buf = req->buf;
+			} else {
+				list_add(&req->list, &dev->rx_reqs);
+				continue;
+			}
+		}
+
+		/* Don't leave irqs off while doing memory copies */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		if (len > current_rx_bytes)
+			size = current_rx_bytes;
+		else
+			size = len;
+
+		size -= copy_to_user(buf, current_rx_buf, size);
+		bytes_copied += size;
+		len -= size;
+		buf += size;
+
+		spin_lock_irqsave(&dev->lock, flags);
+
+		/* We've disconnected or reset so return. */
+		if (dev->reset_printer) {
+			list_add(&current_rx_req->list, &dev->rx_reqs);
+			spin_unlock_irqrestore(&dev->lock, flags);
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		/* If we not returning all the data left in this RX request
+		 * buffer then adjust the amount of data left in the buffer.
+		 * Othewise if we are done with this RX request buffer then
+		 * requeue it to get any incoming data from the USB host.
+		 */
+		if (size < current_rx_bytes) {
+			current_rx_bytes -= size;
+			current_rx_buf += size;
+		} else {
+			list_add(&current_rx_req->list, &dev->rx_reqs);
+			current_rx_bytes = 0;
+			current_rx_buf = NULL;
+			current_rx_req = NULL;
+		}
+	}
+
+	dev->current_rx_req = current_rx_req;
+	dev->current_rx_bytes = current_rx_bytes;
+	dev->current_rx_buf = current_rx_buf;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	mutex_unlock(&dev->lock_printer_io);
+
+	DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
+
+	if (bytes_copied)
+		return bytes_copied;
+	else
+		return -EAGAIN;
+}
+
+static ssize_t
+printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+	size_t			size;	/* Amount of data in a TX request. */
+	size_t			bytes_copied = 0;
+	struct usb_request	*req;
+
+	DBG(dev, "printer_write trying to send %d bytes\n", (int)len);
+
+	if (len == 0)
+		return -EINVAL;
+
+	mutex_lock(&dev->lock_printer_io);
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* Check if a printer reset happens while we have interrupts on */
+	dev->reset_printer = 0;
+
+	/* Check if there is any available write buffers */
+	if (likely(list_empty(&dev->tx_reqs))) {
+		/* Turn interrupts back on before sleeping. */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		/*
+		 * If write buffers are available check if this is
+		 * a NON-Blocking call or not.
+		 */
+		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		/* Sleep until a write buffer is available */
+		wait_event_interruptible(dev->tx_wait,
+				(likely(!list_empty(&dev->tx_reqs))));
+		spin_lock_irqsave(&dev->lock, flags);
+	}
+
+	while (likely(!list_empty(&dev->tx_reqs)) && len) {
+
+		if (len > USB_BUFSIZE)
+			size = USB_BUFSIZE;
+		else
+			size = len;
+
+		req = container_of(dev->tx_reqs.next, struct usb_request,
+				list);
+		list_del_init(&req->list);
+
+		req->complete = tx_complete;
+		req->length = size;
+
+		/* Check if we need to send a zero length packet. */
+		if (len > size)
+			/* They will be more TX requests so no yet. */
+			req->zero = 0;
+		else
+			/* If the data amount is not a multiple of the
+			 * maxpacket size then send a zero length packet.
+			 */
+			req->zero = ((len % dev->in_ep->maxpacket) == 0);
+
+		/* Don't leave irqs off while doing memory copies */
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		if (copy_from_user(req->buf, buf, size)) {
+			list_add(&req->list, &dev->tx_reqs);
+			mutex_unlock(&dev->lock_printer_io);
+			return bytes_copied;
+		}
+
+		bytes_copied += size;
+		len -= size;
+		buf += size;
+
+		spin_lock_irqsave(&dev->lock, flags);
+
+		/* We've disconnected or reset so free the req and buffer */
+		if (dev->reset_printer) {
+			list_add(&req->list, &dev->tx_reqs);
+			spin_unlock_irqrestore(&dev->lock, flags);
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
+			list_add(&req->list, &dev->tx_reqs);
+			spin_unlock_irqrestore(&dev->lock, flags);
+			mutex_unlock(&dev->lock_printer_io);
+			return -EAGAIN;
+		}
+
+		list_add(&req->list, &dev->tx_reqs_active);
+
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+	mutex_unlock(&dev->lock_printer_io);
+
+	DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
+
+	if (bytes_copied)
+		return bytes_copied;
+	else
+		return -EAGAIN;
+}
+
+static int
+printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync)
+{
+	struct printer_dev	*dev = fd->private_data;
+	struct inode *inode = file_inode(fd);
+	unsigned long		flags;
+	int			tx_list_empty;
+
+	mutex_lock(&inode->i_mutex);
+	spin_lock_irqsave(&dev->lock, flags);
+	tx_list_empty = (likely(list_empty(&dev->tx_reqs)));
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	if (!tx_list_empty) {
+		/* Sleep until all data has been sent */
+		wait_event_interruptible(dev->tx_flush_wait,
+				(likely(list_empty(&dev->tx_reqs_active))));
+	}
+	mutex_unlock(&inode->i_mutex);
+
+	return 0;
+}
+
+static unsigned int
+printer_poll(struct file *fd, poll_table *wait)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+	int			status = 0;
+
+	mutex_lock(&dev->lock_printer_io);
+	spin_lock_irqsave(&dev->lock, flags);
+	setup_rx_reqs(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+	mutex_unlock(&dev->lock_printer_io);
+
+	poll_wait(fd, &dev->rx_wait, wait);
+	poll_wait(fd, &dev->tx_wait, wait);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	if (likely(!list_empty(&dev->tx_reqs)))
+		status |= POLLOUT | POLLWRNORM;
+
+	if (likely(dev->current_rx_bytes) ||
+			likely(!list_empty(&dev->rx_buffers)))
+		status |= POLLIN | POLLRDNORM;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return status;
+}
+
+static long
+printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
+{
+	struct printer_dev	*dev = fd->private_data;
+	unsigned long		flags;
+	int			status = 0;
+
+	DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg);
+
+	/* handle ioctls */
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	switch (code) {
+	case GADGET_GET_PRINTER_STATUS:
+		status = (int)dev->printer_status;
+		break;
+	case GADGET_SET_PRINTER_STATUS:
+		dev->printer_status = (u8)arg;
+		break;
+	default:
+		/* could not handle ioctl */
+		DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n",
+				code);
+		status = -ENOTTY;
+	}
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	return status;
+}
+
+/* used after endpoint configuration */
+static const struct file_operations printer_io_operations = {
+	.owner =	THIS_MODULE,
+	.open =		printer_open,
+	.read =		printer_read,
+	.write =	printer_write,
+	.fsync =	printer_fsync,
+	.poll =		printer_poll,
+	.unlocked_ioctl = printer_ioctl,
+	.release =	printer_close,
+	.llseek =	noop_llseek,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int
+set_printer_interface(struct printer_dev *dev)
+{
+	int			result = 0;
+
+	dev->in_ep->desc = ep_desc(dev->gadget, &fs_ep_in_desc, &hs_ep_in_desc,
+				&ss_ep_in_desc);
+	dev->in_ep->driver_data = dev;
+
+	dev->out_ep->desc = ep_desc(dev->gadget, &fs_ep_out_desc,
+				    &hs_ep_out_desc, &ss_ep_out_desc);
+	dev->out_ep->driver_data = dev;
+
+	result = usb_ep_enable(dev->in_ep);
+	if (result != 0) {
+		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
+		goto done;
+	}
+
+	result = usb_ep_enable(dev->out_ep);
+	if (result != 0) {
+		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
+		goto done;
+	}
+
+done:
+	/* on error, disable any endpoints  */
+	if (result != 0) {
+		(void) usb_ep_disable(dev->in_ep);
+		(void) usb_ep_disable(dev->out_ep);
+		dev->in_ep->desc = NULL;
+		dev->out_ep->desc = NULL;
+	}
+
+	/* caller is responsible for cleanup on error */
+	return result;
+}
+
+static void printer_reset_interface(struct printer_dev *dev)
+{
+	if (dev->interface < 0)
+		return;
+
+	DBG(dev, "%s\n", __func__);
+
+	if (dev->in_ep->desc)
+		usb_ep_disable(dev->in_ep);
+
+	if (dev->out_ep->desc)
+		usb_ep_disable(dev->out_ep);
+
+	dev->in_ep->desc = NULL;
+	dev->out_ep->desc = NULL;
+	dev->interface = -1;
+}
+
+/* Change our operational Interface. */
+static int set_interface(struct printer_dev *dev, unsigned number)
+{
+	int			result = 0;
+
+	/* Free the current interface */
+	printer_reset_interface(dev);
+
+	result = set_printer_interface(dev);
+	if (result)
+		printer_reset_interface(dev);
+	else
+		dev->interface = number;
+
+	if (!result)
+		INFO(dev, "Using interface %x\n", number);
+
+	return result;
+}
+
+static void printer_soft_reset(struct printer_dev *dev)
+{
+	struct usb_request	*req;
+
+	INFO(dev, "Received Printer Reset Request\n");
+
+	if (usb_ep_disable(dev->in_ep))
+		DBG(dev, "Failed to disable USB in_ep\n");
+	if (usb_ep_disable(dev->out_ep))
+		DBG(dev, "Failed to disable USB out_ep\n");
+
+	if (dev->current_rx_req != NULL) {
+		list_add(&dev->current_rx_req->list, &dev->rx_reqs);
+		dev->current_rx_req = NULL;
+	}
+	dev->current_rx_bytes = 0;
+	dev->current_rx_buf = NULL;
+	dev->reset_printer = 1;
+
+	while (likely(!(list_empty(&dev->rx_buffers)))) {
+		req = container_of(dev->rx_buffers.next, struct usb_request,
+				list);
+		list_del_init(&req->list);
+		list_add(&req->list, &dev->rx_reqs);
+	}
+
+	while (likely(!(list_empty(&dev->rx_reqs_active)))) {
+		req = container_of(dev->rx_buffers.next, struct usb_request,
+				list);
+		list_del_init(&req->list);
+		list_add(&req->list, &dev->rx_reqs);
+	}
+
+	while (likely(!(list_empty(&dev->tx_reqs_active)))) {
+		req = container_of(dev->tx_reqs_active.next,
+				struct usb_request, list);
+		list_del_init(&req->list);
+		list_add(&req->list, &dev->tx_reqs);
+	}
+
+	if (usb_ep_enable(dev->in_ep))
+		DBG(dev, "Failed to enable USB in_ep\n");
+	if (usb_ep_enable(dev->out_ep))
+		DBG(dev, "Failed to enable USB out_ep\n");
+
+	wake_up_interruptible(&dev->rx_wait);
+	wake_up_interruptible(&dev->tx_wait);
+	wake_up_interruptible(&dev->tx_flush_wait);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static bool gprinter_req_match(struct usb_function *f,
+			       const struct usb_ctrlrequest *ctrl)
+{
+	struct printer_dev	*dev = func_to_printer(f);
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	if ((ctrl->bRequestType & USB_RECIP_MASK) != USB_RECIP_INTERFACE ||
+	    (ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS)
+		return false;
+
+	switch (ctrl->bRequest) {
+	case GET_DEVICE_ID:
+		w_index >>= 8;
+		if (w_length <= PNP_STRING_LEN &&
+		    (USB_DIR_IN & ctrl->bRequestType))
+			break;
+		return false;
+	case GET_PORT_STATUS:
+		if (!w_value && w_length == 1 &&
+		    (USB_DIR_IN & ctrl->bRequestType))
+			break;
+		return false;
+	case SOFT_RESET:
+		if (!w_value && !w_length &&
+		   (USB_DIR_OUT & ctrl->bRequestType))
+			break;
+		/* fall through */
+	default:
+		return false;
+	}
+	return w_index == dev->interface;
+}
+
+/*
+ * The setup() callback implements all the ep0 functionality that's not
+ * handled lower down.
+ */
+static int printer_func_setup(struct usb_function *f,
+		const struct usb_ctrlrequest *ctrl)
+{
+	struct printer_dev *dev = func_to_printer(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			wIndex = le16_to_cpu(ctrl->wIndex);
+	u16			wValue = le16_to_cpu(ctrl->wValue);
+	u16			wLength = le16_to_cpu(ctrl->wLength);
+
+	DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n",
+		ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength);
+
+	switch (ctrl->bRequestType&USB_TYPE_MASK) {
+	case USB_TYPE_CLASS:
+		switch (ctrl->bRequest) {
+		case GET_DEVICE_ID: /* Get the IEEE-1284 PNP String */
+			/* Only one printer interface is supported. */
+			if ((wIndex>>8) != dev->interface)
+				break;
+
+			value = (dev->pnp_string[0] << 8) | dev->pnp_string[1];
+			memcpy(req->buf, dev->pnp_string, value);
+			DBG(dev, "1284 PNP String: %x %s\n", value,
+					&dev->pnp_string[2]);
+			break;
+
+		case GET_PORT_STATUS: /* Get Port Status */
+			/* Only one printer interface is supported. */
+			if (wIndex != dev->interface)
+				break;
+
+			*(u8 *)req->buf = dev->printer_status;
+			value = min_t(u16, wLength, 1);
+			break;
+
+		case SOFT_RESET: /* Soft Reset */
+			/* Only one printer interface is supported. */
+			if (wIndex != dev->interface)
+				break;
+
+			printer_soft_reset(dev);
+
+			value = 0;
+			break;
+
+		default:
+			goto unknown;
+		}
+		break;
+
+	default:
+unknown:
+		VDBG(dev,
+			"unknown ctrl req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			wValue, wIndex, wLength);
+		break;
+	}
+	/* host either stalls (value < 0) or reports success */
+	if (value >= 0) {
+		req->length = value;
+		req->zero = value < wLength;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0) {
+			ERROR(dev, "%s:%d Error!\n", __func__, __LINE__);
+			req->status = 0;
+		}
+	}
+	return value;
+}
+
+static int __init printer_func_bind(struct usb_configuration *c,
+		struct usb_function *f)
+{
+	struct usb_gadget *gadget = c->cdev->gadget;
+	struct printer_dev *dev = func_to_printer(f);
+	struct device *pdev;
+	struct usb_composite_dev *cdev = c->cdev;
+	struct usb_ep *in_ep;
+	struct usb_ep *out_ep = NULL;
+	struct usb_request *req;
+	dev_t devt;
+	int id;
+	int ret;
+	u32 i;
+
+	id = usb_interface_id(c, f);
+	if (id < 0)
+		return id;
+	intf_desc.bInterfaceNumber = id;
+
+	/* finish hookup to lower layer ... */
+	dev->gadget = gadget;
+
+	/* all we really need is bulk IN/OUT */
+	in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
+	if (!in_ep) {
+autoconf_fail:
+		dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n",
+			cdev->gadget->name);
+		return -ENODEV;
+	}
+	in_ep->driver_data = in_ep;	/* claim */
+
+	out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc);
+	if (!out_ep)
+		goto autoconf_fail;
+	out_ep->driver_data = out_ep;	/* claim */
+
+	/* assumes that all endpoints are dual-speed */
+	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
+	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
+	ss_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
+	ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
+
+	ret = usb_assign_descriptors(f, fs_printer_function,
+			hs_printer_function, ss_printer_function);
+	if (ret)
+		return ret;
+
+	dev->in_ep = in_ep;
+	dev->out_ep = out_ep;
+
+	ret = -ENOMEM;
+	for (i = 0; i < dev->q_len; i++) {
+		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
+		if (!req)
+			goto fail_tx_reqs;
+		list_add(&req->list, &dev->tx_reqs);
+	}
+
+	for (i = 0; i < dev->q_len; i++) {
+		req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
+		if (!req)
+			goto fail_rx_reqs;
+		list_add(&req->list, &dev->rx_reqs);
+	}
+
+	/* Setup the sysfs files for the printer gadget. */
+	devt = MKDEV(major, dev->minor);
+	pdev = device_create(usb_gadget_class, NULL, devt,
+				  NULL, "g_printer%d", dev->minor);
+	if (IS_ERR(pdev)) {
+		ERROR(dev, "Failed to create device: g_printer\n");
+		ret = PTR_ERR(pdev);
+		goto fail_rx_reqs;
+	}
+
+	/*
+	 * Register a character device as an interface to a user mode
+	 * program that handles the printer specific functionality.
+	 */
+	cdev_init(&dev->printer_cdev, &printer_io_operations);
+	dev->printer_cdev.owner = THIS_MODULE;
+	ret = cdev_add(&dev->printer_cdev, devt, 1);
+	if (ret) {
+		ERROR(dev, "Failed to open char device\n");
+		goto fail_cdev_add;
+	}
+
+	return 0;
+
+fail_cdev_add:
+	device_destroy(usb_gadget_class, devt);
+
+fail_rx_reqs:
+	while (!list_empty(&dev->rx_reqs)) {
+		req = container_of(dev->rx_reqs.next, struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+
+fail_tx_reqs:
+	while (!list_empty(&dev->tx_reqs)) {
+		req = container_of(dev->tx_reqs.next, struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->in_ep, req);
+	}
+
+	return ret;
+
+}
+
+static void printer_func_unbind(struct usb_configuration *c,
+		struct usb_function *f)
+{
+	struct printer_dev	*dev;
+	struct usb_request	*req;
+
+	dev = func_to_printer(f);
+
+	device_destroy(usb_gadget_class, MKDEV(major, dev->minor));
+
+	/* Remove Character Device */
+	cdev_del(&dev->printer_cdev);
+
+	/* we must already have been disconnected ... no i/o may be active */
+	WARN_ON(!list_empty(&dev->tx_reqs_active));
+	WARN_ON(!list_empty(&dev->rx_reqs_active));
+
+	/* Free all memory for this driver. */
+	while (!list_empty(&dev->tx_reqs)) {
+		req = container_of(dev->tx_reqs.next, struct usb_request,
+				list);
+		list_del(&req->list);
+		printer_req_free(dev->in_ep, req);
+	}
+
+	if (dev->current_rx_req != NULL)
+		printer_req_free(dev->out_ep, dev->current_rx_req);
+
+	while (!list_empty(&dev->rx_reqs)) {
+		req = container_of(dev->rx_reqs.next,
+				struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+
+	while (!list_empty(&dev->rx_buffers)) {
+		req = container_of(dev->rx_buffers.next,
+				struct usb_request, list);
+		list_del(&req->list);
+		printer_req_free(dev->out_ep, req);
+	}
+	usb_free_all_descriptors(f);
+	kfree(dev);
+}
+
+static int printer_func_set_alt(struct usb_function *f,
+		unsigned intf, unsigned alt)
+{
+	struct printer_dev *dev = func_to_printer(f);
+	int ret = -ENOTSUPP;
+
+	if (!alt)
+		ret = set_interface(dev, intf);
+
+	return ret;
+}
+
+static void printer_func_disable(struct usb_function *f)
+{
+	struct printer_dev *dev = func_to_printer(f);
+	unsigned long		flags;
+
+	DBG(dev, "%s\n", __func__);
+
+	spin_lock_irqsave(&dev->lock, flags);
+	printer_reset_interface(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
+				 char *pnp_string, unsigned q_len, int minor)
+{
+	struct printer_dev	*dev;
+	int			status = -ENOMEM;
+	size_t			len;
+
+	if (minor >= minors)
+		return -ENOENT;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->pnp_string = pnp_string;
+	dev->minor = minor;
+
+	dev->function.name = shortname;
+	dev->function.bind = printer_func_bind;
+	dev->function.setup = printer_func_setup;
+	dev->function.unbind = printer_func_unbind;
+	dev->function.set_alt = printer_func_set_alt;
+	dev->function.disable = printer_func_disable;
+	dev->function.req_match = gprinter_req_match;
+	INIT_LIST_HEAD(&dev->tx_reqs);
+	INIT_LIST_HEAD(&dev->rx_reqs);
+	INIT_LIST_HEAD(&dev->rx_buffers);
+
+	if (pnp_str)
+		strlcpy(&dev->pnp_string[2], pnp_str, PNP_STRING_LEN - 2);
+
+	len = strlen(pnp_string);
+	pnp_string[0] = (len >> 8) & 0xFF;
+	pnp_string[1] = len & 0xFF;
+
+	spin_lock_init(&dev->lock);
+	mutex_init(&dev->lock_printer_io);
+	INIT_LIST_HEAD(&dev->tx_reqs_active);
+	INIT_LIST_HEAD(&dev->rx_reqs_active);
+	init_waitqueue_head(&dev->rx_wait);
+	init_waitqueue_head(&dev->tx_wait);
+	init_waitqueue_head(&dev->tx_flush_wait);
+
+	dev->interface = -1;
+	dev->printer_cdev_open = 0;
+	dev->printer_status = PRINTER_NOT_ERROR;
+	dev->current_rx_req = NULL;
+	dev->current_rx_bytes = 0;
+	dev->current_rx_buf = NULL;
+	dev->q_len = q_len;
+
+	status = usb_add_function(c, &dev->function);
+	if (status) {
+		kfree(dev);
+		return status;
+	}
+
+	INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
+	return 0;
+}
+
+int gprinter_setup(int count)
+{
+	int status;
+	dev_t devt;
+
+	usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
+	if (IS_ERR(usb_gadget_class)) {
+		status = PTR_ERR(usb_gadget_class);
+		usb_gadget_class = NULL;
+		pr_err("unable to create usb_gadget class %d\n", status);
+		return status;
+	}
+
+	status = alloc_chrdev_region(&devt, 0, count, "USB printer gadget");
+	if (status) {
+		pr_err("alloc_chrdev_region %d\n", status);
+		class_destroy(usb_gadget_class);
+		usb_gadget_class = NULL;
+		return status;
+	}
+
+	major = MAJOR(devt);
+	minors = count;
+
+	return status;
+}
+
+/* must be called with struct printer_dev's lock_printer_io held */
+void gprinter_cleanup(void)
+{
+	if (major) {
+		unregister_chrdev_region(MKDEV(major, 0), minors);
+		major = minors = 0;
+	}
+	class_destroy(usb_gadget_class);
+	usb_gadget_class = NULL;
+}
diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index f0baea0..4d926d0 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -12,29 +12,7 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/moduleparam.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
-#include <linux/types.h>
-#include <linux/ctype.h>
-#include <linux/cdev.h>
-
 #include <asm/byteorder.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/uaccess.h>
-#include <asm/unaligned.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/composite.h>
@@ -46,58 +24,16 @@
 USB_GADGET_COMPOSITE_OPTIONS();
 
 #define DRIVER_DESC		"Printer Gadget"
-#define DRIVER_VERSION		"2007 OCT 06"
-#define GET_DEVICE_ID		0
-#define GET_PORT_STATUS		1
-#define SOFT_RESET		2
-
-#define PRINTER_MINORS		4
+#define DRIVER_VERSION		"2015 FEB 17"
 
 static const char shortname [] = "printer";
 static const char driver_desc [] = DRIVER_DESC;
 
-static int major, minors;
-static struct class *usb_gadget_class;
-
-/*-------------------------------------------------------------------------*/
-
-struct printer_dev {
-	spinlock_t		lock;		/* lock this structure */
-	/* lock buffer lists during read/write calls */
-	struct mutex		lock_printer_io;
-	struct usb_gadget	*gadget;
-	s8			interface;
-	struct usb_ep		*in_ep, *out_ep;
-
-	struct list_head	rx_reqs;	/* List of free RX structs */
-	struct list_head	rx_reqs_active;	/* List of Active RX xfers */
-	struct list_head	rx_buffers;	/* List of completed xfers */
-	/* wait until there is data to be read. */
-	wait_queue_head_t	rx_wait;
-	struct list_head	tx_reqs;	/* List of free TX structs */
-	struct list_head	tx_reqs_active; /* List of Active TX xfers */
-	/* Wait until there are write buffers available to use. */
-	wait_queue_head_t	tx_wait;
-	/* Wait until all write buffers have been sent. */
-	wait_queue_head_t	tx_flush_wait;
-	struct usb_request	*current_rx_req;
-	size_t			current_rx_bytes;
-	u8			*current_rx_buf;
-	u8			printer_status;
-	u8			reset_printer;
-	int			minor;
-	struct cdev		printer_cdev;
-	u8			printer_cdev_open;
-	wait_queue_head_t	wait;
-	unsigned		q_len;
-	char			*pnp_string;	/* We don't own memory! */
-	struct usb_function	function;
-};
-
-static inline struct printer_dev *func_to_printer(struct usb_function *f)
-{
-	return container_of(f, struct printer_dev, function);
-}
+/*
+ * This will be changed when f_printer is converted
+ * to the new function interface.
+ */
+#include "f_printer.c"
 
 /*-------------------------------------------------------------------------*/
 
@@ -135,10 +71,6 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR);
  * descriptors are built on demand.
  */
 
-/* holds our biggest descriptor */
-#define USB_DESC_BUFSIZE		256
-#define USB_BUFSIZE			8192
-
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
@@ -151,108 +83,6 @@ static struct usb_device_descriptor device_desc = {
 	.bNumConfigurations =	1
 };
 
-static struct usb_interface_descriptor intf_desc = {
-	.bLength =		sizeof intf_desc,
-	.bDescriptorType =	USB_DT_INTERFACE,
-	.bNumEndpoints =	2,
-	.bInterfaceClass =	USB_CLASS_PRINTER,
-	.bInterfaceSubClass =	1,	/* Printer Sub-Class */
-	.bInterfaceProtocol =	2,	/* Bi-Directional */
-	.iInterface =		0
-};
-
-static struct usb_endpoint_descriptor fs_ep_in_desc = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bEndpointAddress =	USB_DIR_IN,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK
-};
-
-static struct usb_endpoint_descriptor fs_ep_out_desc = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bEndpointAddress =	USB_DIR_OUT,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK
-};
-
-static struct usb_descriptor_header *fs_printer_function[] = {
-	(struct usb_descriptor_header *) &intf_desc,
-	(struct usb_descriptor_header *) &fs_ep_in_desc,
-	(struct usb_descriptor_header *) &fs_ep_out_desc,
-	NULL
-};
-
-/*
- * usb 2.0 devices need to expose both high speed and full speed
- * descriptors, unless they only run at full speed.
- */
-
-static struct usb_endpoint_descriptor hs_ep_in_desc = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	cpu_to_le16(512)
-};
-
-static struct usb_endpoint_descriptor hs_ep_out_desc = {
-	.bLength =		USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =	USB_DT_ENDPOINT,
-	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =	cpu_to_le16(512)
-};
-
-static struct usb_qualifier_descriptor dev_qualifier = {
-	.bLength =		sizeof dev_qualifier,
-	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
-	.bcdUSB =		cpu_to_le16(0x0200),
-	.bDeviceClass =		USB_CLASS_PRINTER,
-	.bNumConfigurations =	1
-};
-
-static struct usb_descriptor_header *hs_printer_function[] = {
-	(struct usb_descriptor_header *) &intf_desc,
-	(struct usb_descriptor_header *) &hs_ep_in_desc,
-	(struct usb_descriptor_header *) &hs_ep_out_desc,
-	NULL
-};
-
-/*
- * Added endpoint descriptors for 3.0 devices
- */
-
-static struct usb_endpoint_descriptor ss_ep_in_desc = {
-	.bLength =              USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =      USB_DT_ENDPOINT,
-	.bmAttributes =         USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =       cpu_to_le16(1024),
-};
-
-static struct usb_ss_ep_comp_descriptor ss_ep_in_comp_desc = {
-	.bLength =              sizeof(ss_ep_in_comp_desc),
-	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
-};
-
-static struct usb_endpoint_descriptor ss_ep_out_desc = {
-	.bLength =              USB_DT_ENDPOINT_SIZE,
-	.bDescriptorType =      USB_DT_ENDPOINT,
-	.bmAttributes =         USB_ENDPOINT_XFER_BULK,
-	.wMaxPacketSize =       cpu_to_le16(1024),
-};
-
-static struct usb_ss_ep_comp_descriptor ss_ep_out_comp_desc = {
-	.bLength =              sizeof(ss_ep_out_comp_desc),
-	.bDescriptorType =      USB_DT_SS_ENDPOINT_COMP,
-};
-
-static struct usb_descriptor_header *ss_printer_function[] = {
-	(struct usb_descriptor_header *) &intf_desc,
-	(struct usb_descriptor_header *) &ss_ep_in_desc,
-	(struct usb_descriptor_header *) &ss_ep_in_comp_desc,
-	(struct usb_descriptor_header *) &ss_ep_out_desc,
-	(struct usb_descriptor_header *) &ss_ep_out_comp_desc,
-	NULL
-};
-
 static struct usb_otg_descriptor otg_descriptor = {
 	.bLength =              sizeof otg_descriptor,
 	.bDescriptorType =      USB_DT_OTG,
@@ -264,28 +94,10 @@ static const struct usb_descriptor_header *otg_desc[] = {
 	NULL,
 };
 
-/* maxpacket and other transfer characteristics vary by speed. */
-static inline struct usb_endpoint_descriptor *ep_desc(struct usb_gadget *gadget,
-					struct usb_endpoint_descriptor *fs,
-					struct usb_endpoint_descriptor *hs,
-					struct usb_endpoint_descriptor *ss)
-{
-	switch (gadget->speed) {
-	case USB_SPEED_SUPER:
-		return ss;
-	case USB_SPEED_HIGH:
-		return hs;
-	default:
-		return fs;
-	}
-}
-
 /*-------------------------------------------------------------------------*/
 
 /* descriptors that are built on-demand */
 
-#define PNP_STRING_LEN			1024
-
 static char				product_desc [40] = DRIVER_DESC;
 static char				serial_num [40] = "1";
 static char				pnp_string[PNP_STRING_LEN] =
@@ -309,1030 +121,12 @@ static struct usb_gadget_strings *dev_strings[] = {
 	NULL,
 };
 
-/*-------------------------------------------------------------------------*/
-
-static struct usb_request *
-printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
-{
-	struct usb_request	*req;
-
-	req = usb_ep_alloc_request(ep, gfp_flags);
-
-	if (req != NULL) {
-		req->length = len;
-		req->buf = kmalloc(len, gfp_flags);
-		if (req->buf == NULL) {
-			usb_ep_free_request(ep, req);
-			return NULL;
-		}
-	}
-
-	return req;
-}
-
-static void
-printer_req_free(struct usb_ep *ep, struct usb_request *req)
-{
-	if (ep != NULL && req != NULL) {
-		kfree(req->buf);
-		usb_ep_free_request(ep, req);
-	}
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void rx_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	struct printer_dev	*dev = ep->driver_data;
-	int			status = req->status;
-	unsigned long		flags;
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	list_del_init(&req->list);	/* Remode from Active List */
-
-	switch (status) {
-
-	/* normal completion */
-	case 0:
-		if (req->actual > 0) {
-			list_add_tail(&req->list, &dev->rx_buffers);
-			DBG(dev, "G_Printer : rx length %d\n", req->actual);
-		} else {
-			list_add(&req->list, &dev->rx_reqs);
-		}
-		break;
-
-	/* software-driven interface shutdown */
-	case -ECONNRESET:		/* unlink */
-	case -ESHUTDOWN:		/* disconnect etc */
-		VDBG(dev, "rx shutdown, code %d\n", status);
-		list_add(&req->list, &dev->rx_reqs);
-		break;
-
-	/* for hardware automagic (such as pxa) */
-	case -ECONNABORTED:		/* endpoint reset */
-		DBG(dev, "rx %s reset\n", ep->name);
-		list_add(&req->list, &dev->rx_reqs);
-		break;
-
-	/* data overrun */
-	case -EOVERFLOW:
-		/* FALLTHROUGH */
-
-	default:
-		DBG(dev, "rx status %d\n", status);
-		list_add(&req->list, &dev->rx_reqs);
-		break;
-	}
-
-	wake_up_interruptible(&dev->rx_wait);
-	spin_unlock_irqrestore(&dev->lock, flags);
-}
-
-static void tx_complete(struct usb_ep *ep, struct usb_request *req)
-{
-	struct printer_dev	*dev = ep->driver_data;
-
-	switch (req->status) {
-	default:
-		VDBG(dev, "tx err %d\n", req->status);
-		/* FALLTHROUGH */
-	case -ECONNRESET:		/* unlink */
-	case -ESHUTDOWN:		/* disconnect etc */
-		break;
-	case 0:
-		break;
-	}
-
-	spin_lock(&dev->lock);
-	/* Take the request struct off the active list and put it on the
-	 * free list.
-	 */
-	list_del_init(&req->list);
-	list_add(&req->list, &dev->tx_reqs);
-	wake_up_interruptible(&dev->tx_wait);
-	if (likely(list_empty(&dev->tx_reqs_active)))
-		wake_up_interruptible(&dev->tx_flush_wait);
-
-	spin_unlock(&dev->lock);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int
-printer_open(struct inode *inode, struct file *fd)
-{
-	struct printer_dev	*dev;
-	unsigned long		flags;
-	int			ret = -EBUSY;
-
-	dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	if (!dev->printer_cdev_open) {
-		dev->printer_cdev_open = 1;
-		fd->private_data = dev;
-		ret = 0;
-		/* Change the printer status to show that it's on-line. */
-		dev->printer_status |= PRINTER_SELECTED;
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	DBG(dev, "printer_open returned %x\n", ret);
-	return ret;
-}
-
-static int
-printer_close(struct inode *inode, struct file *fd)
-{
-	struct printer_dev	*dev = fd->private_data;
-	unsigned long		flags;
-
-	spin_lock_irqsave(&dev->lock, flags);
-	dev->printer_cdev_open = 0;
-	fd->private_data = NULL;
-	/* Change printer status to show that the printer is off-line. */
-	dev->printer_status &= ~PRINTER_SELECTED;
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	DBG(dev, "printer_close\n");
-
-	return 0;
-}
-
-/* This function must be called with interrupts turned off. */
-static void
-setup_rx_reqs(struct printer_dev *dev)
-{
-	struct usb_request              *req;
-
-	while (likely(!list_empty(&dev->rx_reqs))) {
-		int error;
-
-		req = container_of(dev->rx_reqs.next,
-				struct usb_request, list);
-		list_del_init(&req->list);
-
-		/* The USB Host sends us whatever amount of data it wants to
-		 * so we always set the length field to the full USB_BUFSIZE.
-		 * If the amount of data is more than the read() caller asked
-		 * for it will be stored in the request buffer until it is
-		 * asked for by read().
-		 */
-		req->length = USB_BUFSIZE;
-		req->complete = rx_complete;
-
-		/* here, we unlock, and only unlock, to avoid deadlock. */
-		spin_unlock(&dev->lock);
-		error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
-		spin_lock(&dev->lock);
-		if (error) {
-			DBG(dev, "rx submit --> %d\n", error);
-			list_add(&req->list, &dev->rx_reqs);
-			break;
-		}
-		/* if the req is empty, then add it into dev->rx_reqs_active. */
-		else if (list_empty(&req->list)) {
-			list_add(&req->list, &dev->rx_reqs_active);
-		}
-	}
-}
-
-static ssize_t
-printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
-{
-	struct printer_dev		*dev = fd->private_data;
-	unsigned long			flags;
-	size_t				size;
-	size_t				bytes_copied;
-	struct usb_request		*req;
-	/* This is a pointer to the current USB rx request. */
-	struct usb_request		*current_rx_req;
-	/* This is the number of bytes in the current rx buffer. */
-	size_t				current_rx_bytes;
-	/* This is a pointer to the current rx buffer. */
-	u8				*current_rx_buf;
-
-	if (len == 0)
-		return -EINVAL;
-
-	DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
-
-	mutex_lock(&dev->lock_printer_io);
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* We will use this flag later to check if a printer reset happened
-	 * after we turn interrupts back on.
-	 */
-	dev->reset_printer = 0;
-
-	setup_rx_reqs(dev);
-
-	bytes_copied = 0;
-	current_rx_req = dev->current_rx_req;
-	current_rx_bytes = dev->current_rx_bytes;
-	current_rx_buf = dev->current_rx_buf;
-	dev->current_rx_req = NULL;
-	dev->current_rx_bytes = 0;
-	dev->current_rx_buf = NULL;
-
-	/* Check if there is any data in the read buffers. Please note that
-	 * current_rx_bytes is the number of bytes in the current rx buffer.
-	 * If it is zero then check if there are any other rx_buffers that
-	 * are on the completed list. We are only out of data if all rx
-	 * buffers are empty.
-	 */
-	if ((current_rx_bytes == 0) &&
-			(likely(list_empty(&dev->rx_buffers)))) {
-		/* Turn interrupts back on before sleeping. */
-		spin_unlock_irqrestore(&dev->lock, flags);
-
-		/*
-		 * If no data is available check if this is a NON-Blocking
-		 * call or not.
-		 */
-		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		/* Sleep until data is available */
-		wait_event_interruptible(dev->rx_wait,
-				(likely(!list_empty(&dev->rx_buffers))));
-		spin_lock_irqsave(&dev->lock, flags);
-	}
-
-	/* We have data to return then copy it to the caller's buffer.*/
-	while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers)))
-			&& len) {
-		if (current_rx_bytes == 0) {
-			req = container_of(dev->rx_buffers.next,
-					struct usb_request, list);
-			list_del_init(&req->list);
-
-			if (req->actual && req->buf) {
-				current_rx_req = req;
-				current_rx_bytes = req->actual;
-				current_rx_buf = req->buf;
-			} else {
-				list_add(&req->list, &dev->rx_reqs);
-				continue;
-			}
-		}
-
-		/* Don't leave irqs off while doing memory copies */
-		spin_unlock_irqrestore(&dev->lock, flags);
-
-		if (len > current_rx_bytes)
-			size = current_rx_bytes;
-		else
-			size = len;
-
-		size -= copy_to_user(buf, current_rx_buf, size);
-		bytes_copied += size;
-		len -= size;
-		buf += size;
-
-		spin_lock_irqsave(&dev->lock, flags);
-
-		/* We've disconnected or reset so return. */
-		if (dev->reset_printer) {
-			list_add(&current_rx_req->list, &dev->rx_reqs);
-			spin_unlock_irqrestore(&dev->lock, flags);
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		/* If we not returning all the data left in this RX request
-		 * buffer then adjust the amount of data left in the buffer.
-		 * Othewise if we are done with this RX request buffer then
-		 * requeue it to get any incoming data from the USB host.
-		 */
-		if (size < current_rx_bytes) {
-			current_rx_bytes -= size;
-			current_rx_buf += size;
-		} else {
-			list_add(&current_rx_req->list, &dev->rx_reqs);
-			current_rx_bytes = 0;
-			current_rx_buf = NULL;
-			current_rx_req = NULL;
-		}
-	}
-
-	dev->current_rx_req = current_rx_req;
-	dev->current_rx_bytes = current_rx_bytes;
-	dev->current_rx_buf = current_rx_buf;
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-	mutex_unlock(&dev->lock_printer_io);
-
-	DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
-
-	if (bytes_copied)
-		return bytes_copied;
-	else
-		return -EAGAIN;
-}
-
-static ssize_t
-printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
-{
-	struct printer_dev	*dev = fd->private_data;
-	unsigned long		flags;
-	size_t			size;	/* Amount of data in a TX request. */
-	size_t			bytes_copied = 0;
-	struct usb_request	*req;
-
-	DBG(dev, "printer_write trying to send %d bytes\n", (int)len);
-
-	if (len == 0)
-		return -EINVAL;
-
-	mutex_lock(&dev->lock_printer_io);
-	spin_lock_irqsave(&dev->lock, flags);
-
-	/* Check if a printer reset happens while we have interrupts on */
-	dev->reset_printer = 0;
-
-	/* Check if there is any available write buffers */
-	if (likely(list_empty(&dev->tx_reqs))) {
-		/* Turn interrupts back on before sleeping. */
-		spin_unlock_irqrestore(&dev->lock, flags);
-
-		/*
-		 * If write buffers are available check if this is
-		 * a NON-Blocking call or not.
-		 */
-		if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		/* Sleep until a write buffer is available */
-		wait_event_interruptible(dev->tx_wait,
-				(likely(!list_empty(&dev->tx_reqs))));
-		spin_lock_irqsave(&dev->lock, flags);
-	}
-
-	while (likely(!list_empty(&dev->tx_reqs)) && len) {
-
-		if (len > USB_BUFSIZE)
-			size = USB_BUFSIZE;
-		else
-			size = len;
-
-		req = container_of(dev->tx_reqs.next, struct usb_request,
-				list);
-		list_del_init(&req->list);
-
-		req->complete = tx_complete;
-		req->length = size;
-
-		/* Check if we need to send a zero length packet. */
-		if (len > size)
-			/* They will be more TX requests so no yet. */
-			req->zero = 0;
-		else
-			/* If the data amount is not a multple of the
-			 * maxpacket size then send a zero length packet.
-			 */
-			req->zero = ((len % dev->in_ep->maxpacket) == 0);
-
-		/* Don't leave irqs off while doing memory copies */
-		spin_unlock_irqrestore(&dev->lock, flags);
-
-		if (copy_from_user(req->buf, buf, size)) {
-			list_add(&req->list, &dev->tx_reqs);
-			mutex_unlock(&dev->lock_printer_io);
-			return bytes_copied;
-		}
-
-		bytes_copied += size;
-		len -= size;
-		buf += size;
-
-		spin_lock_irqsave(&dev->lock, flags);
-
-		/* We've disconnected or reset so free the req and buffer */
-		if (dev->reset_printer) {
-			list_add(&req->list, &dev->tx_reqs);
-			spin_unlock_irqrestore(&dev->lock, flags);
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
-			list_add(&req->list, &dev->tx_reqs);
-			spin_unlock_irqrestore(&dev->lock, flags);
-			mutex_unlock(&dev->lock_printer_io);
-			return -EAGAIN;
-		}
-
-		list_add(&req->list, &dev->tx_reqs_active);
-
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-	mutex_unlock(&dev->lock_printer_io);
-
-	DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
-
-	if (bytes_copied) {
-		return bytes_copied;
-	} else {
-		return -EAGAIN;
-	}
-}
-
-static int
-printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync)
-{
-	struct printer_dev	*dev = fd->private_data;
-	struct inode *inode = file_inode(fd);
-	unsigned long		flags;
-	int			tx_list_empty;
-
-	mutex_lock(&inode->i_mutex);
-	spin_lock_irqsave(&dev->lock, flags);
-	tx_list_empty = (likely(list_empty(&dev->tx_reqs)));
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	if (!tx_list_empty) {
-		/* Sleep until all data has been sent */
-		wait_event_interruptible(dev->tx_flush_wait,
-				(likely(list_empty(&dev->tx_reqs_active))));
-	}
-	mutex_unlock(&inode->i_mutex);
-
-	return 0;
-}
-
-static unsigned int
-printer_poll(struct file *fd, poll_table *wait)
-{
-	struct printer_dev	*dev = fd->private_data;
-	unsigned long		flags;
-	int			status = 0;
-
-	mutex_lock(&dev->lock_printer_io);
-	spin_lock_irqsave(&dev->lock, flags);
-	setup_rx_reqs(dev);
-	spin_unlock_irqrestore(&dev->lock, flags);
-	mutex_unlock(&dev->lock_printer_io);
-
-	poll_wait(fd, &dev->rx_wait, wait);
-	poll_wait(fd, &dev->tx_wait, wait);
-
-	spin_lock_irqsave(&dev->lock, flags);
-	if (likely(!list_empty(&dev->tx_reqs)))
-		status |= POLLOUT | POLLWRNORM;
-
-	if (likely(dev->current_rx_bytes) ||
-			likely(!list_empty(&dev->rx_buffers)))
-		status |= POLLIN | POLLRDNORM;
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	return status;
-}
-
-static long
-printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
-{
-	struct printer_dev	*dev = fd->private_data;
-	unsigned long		flags;
-	int			status = 0;
-
-	DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg);
-
-	/* handle ioctls */
-
-	spin_lock_irqsave(&dev->lock, flags);
-
-	switch (code) {
-	case GADGET_GET_PRINTER_STATUS:
-		status = (int)dev->printer_status;
-		break;
-	case GADGET_SET_PRINTER_STATUS:
-		dev->printer_status = (u8)arg;
-		break;
-	default:
-		/* could not handle ioctl */
-		DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n",
-				code);
-		status = -ENOTTY;
-	}
-
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	return status;
-}
-
-/* used after endpoint configuration */
-static const struct file_operations printer_io_operations = {
-	.owner =	THIS_MODULE,
-	.open =		printer_open,
-	.read =		printer_read,
-	.write =	printer_write,
-	.fsync =	printer_fsync,
-	.poll =		printer_poll,
-	.unlocked_ioctl = printer_ioctl,
-	.release =	printer_close,
-	.llseek =	noop_llseek,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int
-set_printer_interface(struct printer_dev *dev)
-{
-	int			result = 0;
-
-	dev->in_ep->desc = ep_desc(dev->gadget, &fs_ep_in_desc, &hs_ep_in_desc,
-				&ss_ep_in_desc);
-	dev->in_ep->driver_data = dev;
-
-	dev->out_ep->desc = ep_desc(dev->gadget, &fs_ep_out_desc,
-				    &hs_ep_out_desc, &ss_ep_out_desc);
-	dev->out_ep->driver_data = dev;
-
-	result = usb_ep_enable(dev->in_ep);
-	if (result != 0) {
-		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
-		goto done;
-	}
-
-	result = usb_ep_enable(dev->out_ep);
-	if (result != 0) {
-		DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
-		goto done;
-	}
-
-done:
-	/* on error, disable any endpoints  */
-	if (result != 0) {
-		(void) usb_ep_disable(dev->in_ep);
-		(void) usb_ep_disable(dev->out_ep);
-		dev->in_ep->desc = NULL;
-		dev->out_ep->desc = NULL;
-	}
-
-	/* caller is responsible for cleanup on error */
-	return result;
-}
-
-static void printer_reset_interface(struct printer_dev *dev)
-{
-	if (dev->interface < 0)
-		return;
-
-	DBG(dev, "%s\n", __func__);
-
-	if (dev->in_ep->desc)
-		usb_ep_disable(dev->in_ep);
-
-	if (dev->out_ep->desc)
-		usb_ep_disable(dev->out_ep);
-
-	dev->in_ep->desc = NULL;
-	dev->out_ep->desc = NULL;
-	dev->interface = -1;
-}
-
-/* Change our operational Interface. */
-static int set_interface(struct printer_dev *dev, unsigned number)
-{
-	int			result = 0;
-
-	/* Free the current interface */
-	printer_reset_interface(dev);
-
-	result = set_printer_interface(dev);
-	if (result)
-		printer_reset_interface(dev);
-	else
-		dev->interface = number;
-
-	if (!result)
-		INFO(dev, "Using interface %x\n", number);
-
-	return result;
-}
-
-static void printer_soft_reset(struct printer_dev *dev)
-{
-	struct usb_request	*req;
-
-	INFO(dev, "Received Printer Reset Request\n");
-
-	if (usb_ep_disable(dev->in_ep))
-		DBG(dev, "Failed to disable USB in_ep\n");
-	if (usb_ep_disable(dev->out_ep))
-		DBG(dev, "Failed to disable USB out_ep\n");
-
-	if (dev->current_rx_req != NULL) {
-		list_add(&dev->current_rx_req->list, &dev->rx_reqs);
-		dev->current_rx_req = NULL;
-	}
-	dev->current_rx_bytes = 0;
-	dev->current_rx_buf = NULL;
-	dev->reset_printer = 1;
-
-	while (likely(!(list_empty(&dev->rx_buffers)))) {
-		req = container_of(dev->rx_buffers.next, struct usb_request,
-				list);
-		list_del_init(&req->list);
-		list_add(&req->list, &dev->rx_reqs);
-	}
-
-	while (likely(!(list_empty(&dev->rx_reqs_active)))) {
-		req = container_of(dev->rx_buffers.next, struct usb_request,
-				list);
-		list_del_init(&req->list);
-		list_add(&req->list, &dev->rx_reqs);
-	}
-
-	while (likely(!(list_empty(&dev->tx_reqs_active)))) {
-		req = container_of(dev->tx_reqs_active.next,
-				struct usb_request, list);
-		list_del_init(&req->list);
-		list_add(&req->list, &dev->tx_reqs);
-	}
-
-	if (usb_ep_enable(dev->in_ep))
-		DBG(dev, "Failed to enable USB in_ep\n");
-	if (usb_ep_enable(dev->out_ep))
-		DBG(dev, "Failed to enable USB out_ep\n");
-
-	wake_up_interruptible(&dev->rx_wait);
-	wake_up_interruptible(&dev->tx_wait);
-	wake_up_interruptible(&dev->tx_flush_wait);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static bool gprinter_req_match(struct usb_function *f,
-			       const struct usb_ctrlrequest *ctrl)
-{
-	struct printer_dev	*dev = func_to_printer(f);
-	u16			w_index = le16_to_cpu(ctrl->wIndex);
-	u16			w_value = le16_to_cpu(ctrl->wValue);
-	u16			w_length = le16_to_cpu(ctrl->wLength);
-
-	if ((ctrl->bRequestType & USB_RECIP_MASK) != USB_RECIP_INTERFACE ||
-	    (ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS)
-		return false;
-
-	switch (ctrl->bRequest) {
-	case GET_DEVICE_ID:
-		w_index >>= 8;
-		if (w_length <= PNP_STRING_LEN &&
-		    (USB_DIR_IN & ctrl->bRequestType))
-			break;
-		return false;
-	case GET_PORT_STATUS:
-		if (!w_value && w_length == 1 &&
-		    (USB_DIR_IN & ctrl->bRequestType))
-			break;
-		return false;
-	case SOFT_RESET:
-		if (!w_value && !w_length &&
-		   (USB_DIR_OUT & ctrl->bRequestType))
-			break;
-		/* fall through */
-	default:
-		return false;
-	}
-	return w_index == dev->interface;
-}
-
-/*
- * The setup() callback implements all the ep0 functionality that's not
- * handled lower down.
- */
-static int printer_func_setup(struct usb_function *f,
-		const struct usb_ctrlrequest *ctrl)
-{
-	struct printer_dev *dev = func_to_printer(f);
-	struct usb_composite_dev *cdev = f->config->cdev;
-	struct usb_request	*req = cdev->req;
-	int			value = -EOPNOTSUPP;
-	u16			wIndex = le16_to_cpu(ctrl->wIndex);
-	u16			wValue = le16_to_cpu(ctrl->wValue);
-	u16			wLength = le16_to_cpu(ctrl->wLength);
-
-	DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n",
-		ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength);
-
-	switch (ctrl->bRequestType&USB_TYPE_MASK) {
-	case USB_TYPE_CLASS:
-		switch (ctrl->bRequest) {
-		case GET_DEVICE_ID: /* Get the IEEE-1284 PNP String */
-			/* Only one printer interface is supported. */
-			if ((wIndex>>8) != dev->interface)
-				break;
-
-			value = (dev->pnp_string[0] << 8) | dev->pnp_string[1];
-			memcpy(req->buf, dev->pnp_string, value);
-			DBG(dev, "1284 PNP String: %x %s\n", value,
-					&dev->pnp_string[2]);
-			break;
-
-		case GET_PORT_STATUS: /* Get Port Status */
-			/* Only one printer interface is supported. */
-			if (wIndex != dev->interface)
-				break;
-
-			*(u8 *)req->buf = dev->printer_status;
-			value = min(wLength, (u16) 1);
-			break;
-
-		case SOFT_RESET: /* Soft Reset */
-			/* Only one printer interface is supported. */
-			if (wIndex != dev->interface)
-				break;
-
-			printer_soft_reset(dev);
-
-			value = 0;
-			break;
-
-		default:
-			goto unknown;
-		}
-		break;
-
-	default:
-unknown:
-		VDBG(dev,
-			"unknown ctrl req%02x.%02x v%04x i%04x l%d\n",
-			ctrl->bRequestType, ctrl->bRequest,
-			wValue, wIndex, wLength);
-		break;
-	}
-	/* host either stalls (value < 0) or reports success */
-	if (value >= 0) {
-		req->length = value;
-		req->zero = value < wLength;
-		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
-		if (value < 0) {
-			ERROR(dev, "%s:%d Error!\n", __func__, __LINE__);
-			req->status = 0;
-		}
-	}
-	return value;
-}
-
-static int __init printer_func_bind(struct usb_configuration *c,
-		struct usb_function *f)
-{
-	struct usb_gadget *gadget = c->cdev->gadget;
-	struct printer_dev *dev = func_to_printer(f);
-	struct device *pdev;
-	struct usb_composite_dev *cdev = c->cdev;
-	struct usb_ep *in_ep;
-	struct usb_ep *out_ep = NULL;
-	struct usb_request *req;
-	dev_t devt;
-	int id;
-	int ret;
-	u32 i;
-
-	id = usb_interface_id(c, f);
-	if (id < 0)
-		return id;
-	intf_desc.bInterfaceNumber = id;
-
-	/* finish hookup to lower layer ... */
-	dev->gadget = gadget;
-
-	/* all we really need is bulk IN/OUT */
-	in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
-	if (!in_ep) {
-autoconf_fail:
-		dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n",
-			cdev->gadget->name);
-		return -ENODEV;
-	}
-	in_ep->driver_data = in_ep;	/* claim */
-
-	out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc);
-	if (!out_ep)
-		goto autoconf_fail;
-	out_ep->driver_data = out_ep;	/* claim */
-
-	/* assumes that all endpoints are dual-speed */
-	hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
-	hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
-	ss_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
-	ss_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
-
-	ret = usb_assign_descriptors(f, fs_printer_function,
-			hs_printer_function, ss_printer_function);
-	if (ret)
-		return ret;
-
-	dev->in_ep = in_ep;
-	dev->out_ep = out_ep;
-
-	ret = -ENOMEM;
-	for (i = 0; i < dev->q_len; i++) {
-		req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
-		if (!req)
-			goto fail_tx_reqs;
-		list_add(&req->list, &dev->tx_reqs);
-	}
-
-	for (i = 0; i < dev->q_len; i++) {
-		req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
-		if (!req)
-			goto fail_rx_reqs;
-		list_add(&req->list, &dev->rx_reqs);
-	}
-
-	/* Setup the sysfs files for the printer gadget. */
-	devt = MKDEV(major, dev->minor);
-	pdev = device_create(usb_gadget_class, NULL, devt,
-				  NULL, "g_printer%d", dev->minor);
-	if (IS_ERR(pdev)) {
-		ERROR(dev, "Failed to create device: g_printer\n");
-		ret = PTR_ERR(pdev);
-		goto fail_rx_reqs;
-	}
-
-	/*
-	 * Register a character device as an interface to a user mode
-	 * program that handles the printer specific functionality.
-	 */
-	cdev_init(&dev->printer_cdev, &printer_io_operations);
-	dev->printer_cdev.owner = THIS_MODULE;
-	ret = cdev_add(&dev->printer_cdev, devt, 1);
-	if (ret) {
-		ERROR(dev, "Failed to open char device\n");
-		goto fail_cdev_add;
-	}
-
-	return 0;
-
-fail_cdev_add:
-	device_destroy(usb_gadget_class, devt);
-
-fail_rx_reqs:
-	while (!list_empty(&dev->rx_reqs)) {
-		req = container_of(dev->rx_reqs.next, struct usb_request, list);
-		list_del(&req->list);
-		printer_req_free(dev->out_ep, req);
-	}
-
-fail_tx_reqs:
-	while (!list_empty(&dev->tx_reqs)) {
-		req = container_of(dev->tx_reqs.next, struct usb_request, list);
-		list_del(&req->list);
-		printer_req_free(dev->in_ep, req);
-	}
-
-	return ret;
-
-}
-
-static void printer_func_unbind(struct usb_configuration *c,
-		struct usb_function *f)
-{
-	struct printer_dev	*dev;
-	struct usb_request	*req;
-
-	dev = func_to_printer(f);
-
-	device_destroy(usb_gadget_class, MKDEV(major, dev->minor));
-
-	/* Remove Character Device */
-	cdev_del(&dev->printer_cdev);
-
-	/* we must already have been disconnected ... no i/o may be active */
-	WARN_ON(!list_empty(&dev->tx_reqs_active));
-	WARN_ON(!list_empty(&dev->rx_reqs_active));
-
-	/* Free all memory for this driver. */
-	while (!list_empty(&dev->tx_reqs)) {
-		req = container_of(dev->tx_reqs.next, struct usb_request,
-				list);
-		list_del(&req->list);
-		printer_req_free(dev->in_ep, req);
-	}
-
-	if (dev->current_rx_req != NULL)
-		printer_req_free(dev->out_ep, dev->current_rx_req);
-
-	while (!list_empty(&dev->rx_reqs)) {
-		req = container_of(dev->rx_reqs.next,
-				struct usb_request, list);
-		list_del(&req->list);
-		printer_req_free(dev->out_ep, req);
-	}
-
-	while (!list_empty(&dev->rx_buffers)) {
-		req = container_of(dev->rx_buffers.next,
-				struct usb_request, list);
-		list_del(&req->list);
-		printer_req_free(dev->out_ep, req);
-	}
-	usb_free_all_descriptors(f);
-	kfree(dev);
-}
-
-static int printer_func_set_alt(struct usb_function *f,
-		unsigned intf, unsigned alt)
-{
-	struct printer_dev *dev = func_to_printer(f);
-	int ret = -ENOTSUPP;
-
-	if (!alt)
-		ret = set_interface(dev, intf);
-
-	return ret;
-}
-
-static void printer_func_disable(struct usb_function *f)
-{
-	struct printer_dev *dev = func_to_printer(f);
-	unsigned long		flags;
-
-	DBG(dev, "%s\n", __func__);
-
-	spin_lock_irqsave(&dev->lock, flags);
-	printer_reset_interface(dev);
-	spin_unlock_irqrestore(&dev->lock, flags);
-}
-
 static struct usb_configuration printer_cfg_driver = {
 	.label			= "printer",
 	.bConfigurationValue	= 1,
 	.bmAttributes		= USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
 };
 
-static int f_printer_bind_config(struct usb_configuration *c, char *pnp_str,
-				 char *pnp_string, unsigned q_len, int minor)
-{
-	struct printer_dev	*dev;
-	int			status = -ENOMEM;
-	size_t			len;
-
-	if (minor >= minors)
-		return -ENOENT;
-
-	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-	if (!dev)
-		return -ENOMEM;
-
-	dev->pnp_string = pnp_string;
-	dev->minor = minor;
-
-	dev->function.name = shortname;
-	dev->function.bind = printer_func_bind;
-	dev->function.setup = printer_func_setup;
-	dev->function.unbind = printer_func_unbind;
-	dev->function.set_alt = printer_func_set_alt;
-	dev->function.disable = printer_func_disable;
-	dev->function.req_match = gprinter_req_match;
-	INIT_LIST_HEAD(&dev->tx_reqs);
-	INIT_LIST_HEAD(&dev->rx_reqs);
-	INIT_LIST_HEAD(&dev->rx_buffers);
-
-	if (pnp_str)
-		strlcpy(&dev->pnp_string[2], pnp_str, PNP_STRING_LEN - 2);
-
-	len = strlen(pnp_string);
-	pnp_string[0] = (len >> 8) & 0xFF;
-	pnp_string[1] = len & 0xFF;
-
-	spin_lock_init(&dev->lock);
-	mutex_init(&dev->lock_printer_io);
-	INIT_LIST_HEAD(&dev->tx_reqs_active);
-	INIT_LIST_HEAD(&dev->rx_reqs_active);
-	init_waitqueue_head(&dev->rx_wait);
-	init_waitqueue_head(&dev->tx_wait);
-	init_waitqueue_head(&dev->tx_flush_wait);
-
-	dev->interface = -1;
-	dev->printer_cdev_open = 0;
-	dev->printer_status = PRINTER_NOT_ERROR;
-	dev->current_rx_req = NULL;
-	dev->current_rx_bytes = 0;
-	dev->current_rx_buf = NULL;
-	dev->q_len = q_len;
-
-	status = usb_add_function(c, &dev->function);
-	if (status) {
-		kfree(dev);
-		return status;
-	}
-	INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
-	return 0;
-}
-
 static int __init printer_do_config(struct usb_configuration *c)
 {
 	struct usb_gadget	*gadget = c->cdev->gadget;
@@ -1350,44 +144,6 @@ static int __init printer_do_config(struct usb_configuration *c)
 	return f_printer_bind_config(c, iPNPstring, pnp_string, QLEN, 0);
 }
 
-int gprinter_setup(int count)
-{
-	int status;
-	dev_t devt;
-
-	usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
-	if (IS_ERR(usb_gadget_class)) {
-		status = PTR_ERR(usb_gadget_class);
-		usb_gadget_class = NULL;
-		pr_err("unable to create usb_gadget class %d\n", status);
-		return status;
-	}
-
-	status = alloc_chrdev_region(&devt, 0, count, "USB printer gadget");
-	if (status) {
-		pr_err("alloc_chrdev_region %d\n", status);
-		class_destroy(usb_gadget_class);
-		usb_gadget_class = NULL;
-		return status;
-	}
-
-	major = MAJOR(devt);
-	minors = count;
-
-	return status;
-}
-
-/* must be called with struct printer_dev's lock_printer_io held */
-void gprinter_cleanup(void)
-{
-	if (major) {
-		unregister_chrdev_region(MKDEV(major, 0), minors);
-		major = minors = 0;
-	}
-	class_destroy(usb_gadget_class);
-	usb_gadget_class = NULL;
-}
-
 static int __init printer_bind(struct usb_composite_dev *cdev)
 {
 	int ret;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux