Except the same process with earlier imx6, it has below two features:
- Choose which vbus voltage as vbus wakeup source
We choose B_SESSION_VALID as vbus wakeup source since when the system
goes to suspend, the vbus comparator can't compare the vbus voltage
for VBUS_VALID.
- Disable dp/dm (linestate) change as wakeup source at device mode
when the vbus is not there, we don't expect dp/dm change waking up
usb controller at this situation.
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
---
drivers/usb/chipidea/usbmisc_imx.c | 47 ++++++++++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 90b7d7f..8af070f 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -58,7 +58,16 @@
#define MX6_BM_WAKEUP_ENABLE BIT(10)
#define MX6_BM_ID_WAKEUP BIT(16)
#define MX6_BM_VBUS_WAKEUP BIT(17)
+#define MX6SX_BM_DPDM_WAKEUP_EN BIT(29)
#define MX6_BM_WAKEUP_INTR BIT(31)
+#define MX6_USB_OTG1_PHY_CTRL 0x18
+/* For imx6dql, it is host-only controller, for later imx6, it is otg's */
+#define MX6_USB_OTG2_PHY_CTRL 0x1c
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE(v) (v << 8)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_VBUS MX6SX_USB_VBUS_WAKEUP_SOURCE(0)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_AVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(1)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID MX6SX_USB_VBUS_WAKEUP_SOURCE(2)
+#define MX6SX_USB_VBUS_WAKEUP_SOURCE_SESS_END MX6SX_USB_VBUS_WAKEUP_SOURCE(3)
#define VF610_OVER_CUR_DIS BIT(7)
@@ -259,6 +268,35 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
return 0;
}
+static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
+{
+ void __iomem *reg = NULL;
+ unsigned long flags;
+ struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+ u32 val;
+ int ret = 0;
+
+ usbmisc_imx6q_init(data);
+
+ if (data->index == 0 || data->index == 1) {
+ reg = usbmisc->base + MX6_USB_OTG1_PHY_CTRL + data->index * 4;
+ spin_lock_irqsave(&usbmisc->lock, flags);
+ /* Set vbus wakeup source as bvalid */
+ val = readl(reg);
+ writel(val | MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID, reg);
+ /*
+ * Disable dp/dm wakeup in device mode when vbus is
+ * not there.
+ */
+ val = readl(usbmisc->base + data->index * 4);
+ writel(val & ~MX6SX_BM_DPDM_WAKEUP_EN,
+ usbmisc->base + data->index * 4);
+ spin_unlock_irqrestore(&usbmisc->lock, flags);
+ }
+
+ return ret;
+}
+
static int usbmisc_vf610_init(struct imx_usbmisc_data *data)
{
struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
@@ -301,6 +339,11 @@ static const struct usbmisc_ops vf610_usbmisc_ops = {
.init = usbmisc_vf610_init,
};
+static const struct usbmisc_ops imx6sx_usbmisc_ops = {
+ .set_wakeup = usbmisc_imx6q_set_wakeup,
+ .init = usbmisc_imx6sx_init,
+};
+
int imx_usbmisc_init(struct imx_usbmisc_data *data)
{
struct imx_usbmisc *usbmisc;
@@ -372,6 +415,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
.compatible = "fsl,vf610-usbmisc",
.data = &vf610_usbmisc_ops,
},
+ {
+ .compatible = "fsl,imx6sx-usbmisc",
+ .data = &imx6sx_usbmisc_ops,
+ },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
