On Mon, Feb 09, 2015 at 09:22:50AM +0100, Maxime Ripard wrote:
> On Wed, Feb 04, 2015 at 05:04:18AM -0800, Greg Kroah-Hartman wrote:
> > On Wed, Feb 04, 2015 at 10:35:22AM +0100, Maxime Ripard wrote:
> > > Hi Mathias, Greg,
> > >
> > > On Mon, Jan 19, 2015 at 02:01:12PM +0100, Maxime Ripard wrote:
> > > > The commit 973747928514 ("usb: host: xhci-plat: add support for the Armada
> > > > 375/38x XHCI controllers") extended the xhci-plat driver to support the Armada
> > > > 375/38x SoCs, mostly by adding a quirk configuring the MBUS window.
> > > >
> > > > However, that quirk was run before the clock the controllers needs has been
> > > > enabled. This usually worked because the clock was first enabled by the
> > > > bootloader, and left as such until the driver is probe, where it tries to
> > > > access the MBUS configuration registers before enabling the clock.
> > > >
> > > > Things get messy when EPROBE_DEFER is involved during the probe, since as part
> > > > of its error path, the driver will rightfully disable the clock. When the
> > > > driver will be reprobed, it will retry to access the MBUS registers, but this
> > > > time with the clock disabled, which hangs forever.
> > > >
> > > > Fix this by running the quirks after the clock has been enabled by the driver.
> > > >
> > > > Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> > > > Cc: <stable@xxxxxxxxxxxxxxx> # v3.16+
> > >
> > > Any chance for this to go in 3.19?
> >
> > For 3.19? It's too late, I'm not sending anything else to Linus as 3.19
> > will be out in a few days.
>
> Ok. I'll resend it when 3.20-rc1 is out then.
Why resend? Mathias should be queueing this up properly. Mathias?
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
