On Wed, Feb 4, 2015 at 4:01 PM, Zhangfei Gao <zhangfei.gao@xxxxxxxxxx> wrote: > Since phy is definitely used usb controller, load the phy > earlier rather than using defer probe to make boot time shorter. > > Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx> > --- > drivers/usb/Makefile | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile > index 2f1e2aa..d8926c6 100644 > --- a/drivers/usb/Makefile > +++ b/drivers/usb/Makefile > @@ -5,6 +5,7 @@ > # Object files in subdirectories > > obj-$(CONFIG_USB) += core/ > +obj-$(CONFIG_USB_SUPPORT) += phy/ > > obj-$(CONFIG_USB_DWC3) += dwc3/ > obj-$(CONFIG_USB_DWC2) += dwc2/ > @@ -48,7 +49,6 @@ obj-$(CONFIG_USB_MICROTEK) += image/ > obj-$(CONFIG_USB_SERIAL) += serial/ > > obj-$(CONFIG_USB) += misc/ > -obj-$(CONFIG_USB_SUPPORT) += phy/ > obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ > > obj-$(CONFIG_USB_ATM) += atm/ > -- The similar patch posted before, you may use probe deferral in your controller driver if the PHY is not ready, besides, both controller and phy driver may be built as modules. -- BR, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
