[PATCH 2/2] usb: dwc2: Add default fifo sizes for Lantiq SoCs

[Antti Seppälä <a.seppala@xxxxxxxxx>]

Lantiq SoCs define the total_fifo_size to be 552 dwords which is too
small for algorithm in dwc2_calculate_dynamic_fifo to work properly.

This patch provides sensible defaults for fifo sizes for Lantiq SoCs
to be used in dwc2 driver. The default values are taken from original
ifx-hcd driver.

Signed-off-by: Antti Seppälä <a.seppala@xxxxxxxxx>
Signed-off-by: Vincent Pelletier <plr.vincent@xxxxxxxxx>
---
 Documentation/devicetree/bindings/usb/dwc2.txt |  1 +
 drivers/usb/dwc2/platform.c                    | 29 ++++++++++++++++++++++++++
 2 files changed, 30 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 482f815..2b3a2b2 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -7,6 +7,7 @@ Required properties:
   - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
   - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
   - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
+  - "lantiq,dwc2": DWC2 USB controllers found in Lantiq SoCs;
   - snps,dwc2: A generic DWC2 USB controller with default parameters.
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 6a795aa..2b0714a 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -106,6 +106,34 @@ static const struct dwc2_core_params params_rk3066 = {
 	.uframe_sched			= -1,
 };
 
+static const struct dwc2_core_params params_ltq = {
+	.otg_cap			= -1,
+	.otg_ver			= -1,
+	.dma_enable			= -1,
+	.dma_desc_enable		= -1,
+	.speed				= -1,
+	.enable_dynamic_fifo		= -1,
+	.en_multiple_tx_fifo		= -1,
+	.host_rx_fifo_size		= 240,	/* 240 DWORDs */
+	.host_nperio_tx_fifo_size	= 240,	/* 240 DWORDs */
+	.host_perio_tx_fifo_size	= 32,	/* 32 DWORDs */
+	.max_transfer_size		= -1,
+	.max_packet_count		= -1,
+	.host_channels			= -1,
+	.phy_type			= -1,
+	.phy_utmi_width			= -1,
+	.phy_ulpi_ddr			= -1,
+	.phy_ulpi_ext_vbus		= -1,
+	.i2c_enable			= -1,
+	.ulpi_fs_ls			= -1,
+	.host_support_fs_ls_low_power	= -1,
+	.host_ls_low_power_phy_clk	= -1,
+	.ts_dline			= -1,
+	.reload_ctl			= -1,
+	.ahbcfg				= -1,
+	.uframe_sched			= -1,
+};
+
 /**
  * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
  * DWC_otg driver
@@ -130,6 +158,7 @@ static int dwc2_driver_remove(struct platform_device *dev)
 static const struct of_device_id dwc2_of_match_table[] = {
 	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
 	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
+	{ .compatible = "lantiq,dwc2", .data = &params_ltq },
 	{ .compatible = "snps,dwc2", .data = NULL },
 	{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
 	{},
-- 
2.0.5

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html