On Wed, Jan 28, 2015 at 11:02:37PM -0600, Felipe Balbi wrote: > Hi, > > On Fri, Jan 23, 2015 at 05:12:51PM +0200, Heikki Krogerus wrote: > > @@ -6,4 +6,5 @@ obj-$(CONFIG_USB_COMMON) += usb-common.o > > usb-common-y += common.o > > usb-common-$(CONFIG_USB_LED_TRIG) += led.o > > > > -obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o > > +obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o > > a bit of unrelated change here. OK > > diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig > > index cc0ced0..c0fc3b5 100644 > > --- a/drivers/usb/core/Kconfig > > +++ b/drivers/usb/core/Kconfig > > @@ -84,3 +84,11 @@ config USB_OTG_FSM > > Implements OTG Finite State Machine as specified in On-The-Go > > and Embedded Host Supplement to the USB Revision 2.0 Specification. > > > > +config USB_ULPI_BUS > > + bool "USB ULPI PHY interface support" > > + depends on USB || USB_GADGET > > depends on USB_SUPPORT ? sure > > +int ulpi_register_driver(struct ulpi_driver *drv); > > +void ulpi_unregister_driver(struct ulpi_driver *drv); > > + > > +#define module_ulpi_driver(__ulpi_driver) \ > > + module_driver(__ulpi_driver, ulpi_register_driver, \ > > + ulpi_unregister_driver) > > + > > +int ulpi_read(struct ulpi *ulpi, u8 addr); > > +int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val); > > no stubs ? Is there really need for them? Well, I'll add them. Thanks, -- heikki -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
