Hi Shimoda-san, On Mon, Jan 19, 2015 at 12:53:17PM +0900, Yoshihiro Shimoda wrote: > This patch adds dma_request_slave_channel_reason() calling to request > dma slave channels for multiplatform environment. > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> > --- > .../devicetree/bindings/usb/renesas_usbhs.txt | 2 ++ > drivers/usb/renesas_usbhs/fifo.c | 11 ++++++++++- > 2 files changed, 12 insertions(+), 1 deletion(-) I have observed what appears to be a regression caused by this patch when booting a kernel built using shmobile_defconfig on the koelsch and lager boards. I noticed this problem while testing next-20150129. I have provided boot logs at the end of this email. > > diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt > index b08c903..61b045b 100644 > --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt > +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt > @@ -14,6 +14,8 @@ Optional properties: > function should be enabled > - phys: phandle + phy specifier pair > - phy-names: must be "usb" > + - dmas: Must contain a list of references to DMA specifiers. > + - dma-names : Must contain a list of DMA names, "tx" or "rx". > > Example: > usbhs: usb@e6590000 { > diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c > index 48e31b9..4c086b1 100644 > --- a/drivers/usb/renesas_usbhs/fifo.c > +++ b/drivers/usb/renesas_usbhs/fifo.c > @@ -1069,12 +1069,21 @@ static void usbhsf_dma_init_pdev(struct usbhs_fifo *fifo) > &fifo->rx_slave); > } > > +static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo) > +{ > + fifo->tx_chan = dma_request_slave_channel_reason(dev, "tx"); > + fifo->rx_chan = dma_request_slave_channel_reason(dev, "rx"); > +} > + > static void usbhsf_dma_init(struct usbhs_priv *priv, > struct usbhs_fifo *fifo) > { > struct device *dev = usbhs_priv_to_dev(priv); > > - usbhsf_dma_init_pdev(fifo); > + if (dev->of_node) > + usbhsf_dma_init_dt(dev, fifo); > + else > + usbhsf_dma_init_pdev(fifo); > > if (fifo->tx_chan || fifo->rx_chan) > dev_dbg(dev, "enable DMAEngine (%s%s%s)\n", Koelsch ------- Starting kernel ... Booting Linux on physical CPU 0x0 Linux version 3.19.0-rc5-00129-gabd2dbf (horms@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.3 (GCC) ) #959 SMP Thu Jan 29 20:40:07 JST 2015 CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c5307d CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Machine model: Koelsch Ignoring memory block 0x200000000 - 0x240000000 debug: ignoring loglevel setting. Memory policy: Data cache writealloc On node 0 totalpages: 262144 free_area_init_node: node 0, pgdat c0612a80, node_mem_map eeff9000 Normal zone: 1520 pages used for memmap Normal zone: 0 pages reserved Normal zone: 194560 pages, LIFO batch:31 HighMem zone: 67584 pages, LIFO batch:15 PERCPU: Embedded 7 pages/cpu @eefca000 s7552 r0 d21120 u32768 pcpu-alloc: s7552 r0 d21120 u32768 alloc=8*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624 Kernel command line: ignore_loglevel rw root=/dev/nfs ip=dhcp PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032964K/1048576K available (4524K kernel code, 264K rwdata, 1128K rodata, 268K init, 191K bss, 15612K reserved, 0K cma-reserved, 270336K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) lowmem : 0xc0000000 - 0xef800000 ( 760 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) .text : 0xc0008000 - 0xc058e024 (5657 kB) .init : 0xc058f000 - 0xc05d2000 ( 268 kB) .data : 0xc05d2000 - 0xc06143a0 ( 265 kB) .bss : 0xc06143a0 - 0xc064407c ( 192 kB) Hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 Architected cp15 timer(s) running at 10.00MHz (virt). sched_clock: 56 bits at 10MHz, resolution 100ns, wraps every 3435973836800ns Switching to timer-based delay loop, resolution 100ns Console: colour dummy device 80x30 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) CPU: Testing write buffer coherency: ok CPU0: update cpu_capacity 1024 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x40471350 - 0x404713a8 Unable to boot CPU1 when MD21 is set CPU1: failed to boot: -524 Brought up 1 CPUs SMP: Total of 1 processors activated (20.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations renesas_irqc e61c0000.interrupt-controller: driving 10 irqs sh-pfc e6060000.pfc: r8a77910_pfc support registered No ATAGs? hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. platform regulator@0: Driver reg-fixed-voltage requests probe deferral platform regulator@2: Driver reg-fixed-voltage requests probe deferral platform regulator@4: Driver reg-fixed-voltage requests probe deferral gpio-regulator regulator@1: Could not obtain regulator setting GPIOs: -517 platform regulator@1: Driver gpio-regulator requests probe deferral gpio-regulator regulator@3: Could not obtain regulator setting GPIOs: -517 platform regulator@3: Driver gpio-regulator requests probe deferral gpio-regulator regulator@5: Could not obtain regulator setting GPIOs: -517 platform regulator@5: Driver gpio-regulator requests probe deferral vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb i2c-sh_mobile e60b0000.i2c: I2C adapter 6, bus speed 100000 Hz media: Linux media interface: v0.10 Linux video capture interface: v2.00 sh_cmt ffca0000.timer: ch0: used for clock events sh_cmt ffca0000.timer: ch1: used as clock source Advanced Linux Sound Architecture Driver Initialized. Switched to clocksource arch_sys_counter NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 futex hash table entries: 512 (order: 3, 32768 bytes) NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... bounce: pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) gpio_rcar e6050000.gpio: driving 32 GPIOs gpio_rcar e6051000.gpio: driving 32 GPIOs gpio_rcar e6052000.gpio: driving 32 GPIOs gpio_rcar e6053000.gpio: driving 32 GPIOs gpio_rcar e6054000.gpio: driving 32 GPIOs gpio_rcar e6055000.gpio: driving 32 GPIOs gpio_rcar e6055400.gpio: driving 32 GPIOs gpio_rcar e6055800.gpio: driving 26 GPIOs pci-rcar-gen2 ee090000.pci: PCI: bus0 revision 11 pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0xee080000-0xee0810ff] pci_bus 0000:00: root bus resource [mem 0xee080000-0xee0810ff] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] pci 0000:00:00.0: [1033:0000] type 00 class 0x060000 pci 0000:00:00.0: reg 0x10: [mem 0xee090800-0xee090bff] pci 0000:00:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref] pci 0000:00:01.0: [1033:0035] type 00 class 0x0c0310 pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00000fff] pci 0000:00:01.0: supports D1 D2 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:02.0: [1033:00e0] type 00 class 0x0c0320 pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x000000ff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot PCI: bus0: Fast back to back transfers disabled pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 pci 0000:00:01.0: can't enable device: BAR 0 [mem 0x00000000-0x00000fff] not claimed pci 0000:00:01.0: Can't enable PCI device, BIOS handoff failed. pci 0000:00:02.0: can't enable device: BAR 0 [mem 0x00000000-0x000000ff] not claimed pci 0000:00:02.0: Can't enable PCI device, BIOS handoff failed. pci 0000:00:01.0: BAR 0: assigned [mem 0xee080000-0xee080fff] pci 0000:00:02.0: BAR 0: assigned [mem 0xee081000-0xee0810ff] pci-rcar-gen2 ee0d0000.pci: PCI: bus0 revision 11 pci-rcar-gen2 ee0d0000.pci: PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [io 0xee0c0000-0xee0c10ff] pci_bus 0000:01: root bus resource [mem 0xee0c0000-0xee0c10ff] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff] pci 0000:01:00.0: [1033:0000] type 00 class 0x060000 pci 0000:01:00.0: reg 0x10: [mem 0xee0d0800-0xee0d0bff] pci 0000:01:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref] pci 0000:01:01.0: [1033:0035] type 00 class 0x0c0310 pci 0000:01:01.0: reg 0x10: [mem 0x00000000-0x00000fff] pci 0000:01:01.0: supports D1 D2 pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot pci 0000:01:02.0: [1033:00e0] type 00 class 0x0c0320 pci 0000:01:02.0: reg 0x10: [mem 0x00000000-0x000000ff] pci 0000:01:02.0: supports D1 D2 pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot PCI: bus1: Fast back to back transfers disabled pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 pci 0000:01:01.0: can't enable device: BAR 0 [mem 0x00000000-0x00000fff] not claimed pci 0000:01:01.0: Can't enable PCI device, BIOS handoff failed. pci 0000:01:02.0: can't enable device: BAR 0 [mem 0x00000000-0x000000ff] not claimed pci 0000:01:02.0: Can't enable PCI device, BIOS handoff failed. pci 0000:01:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff] pci 0000:01:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff] rcar-pcie fe000000.pcie: PCIe link down Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled SuperH (H)SCI(F) driver initialized e6e60000.serial: ttySC6 at MMIO 0xe6e60000 (irq = 107, base_baud = 0) is a scif console [ttySC6] enabled e6e68000.serial: ttySC7 at MMIO 0xe6e68000 (irq = 108, base_baud = 0) is a scif [drm] Initialized drm 1.1.0 20060810 rcar-du feb00000.display: Failed to initialize drm fb helper. rcar-du feb00000.display: failed to initialize DRM/KMS rcar-du: probe of feb00000.display failed with error -22 scsi host0: sata_rcar ata1: SATA max UDMA/133 irq 110 renesas_spi e6b10000.spi: dma_request_slave_channel_compat failed renesas_spi e6b10000.spi: DMA not available, using PIO m25p80 spi0.0: s25fl512s (65536 Kbytes) 3 ofpart partitions found on MTD device spi0.0 Creating 3 MTD partitions on "spi0.0": 0x000000000000-0x000000080000 : "loader" 0x000000080000-0x000000100000 : "bootenv" 0x000000100000-0x000004000000 : "data" renesas_spi e6b10000.spi: probed spi_sh_msiof e6e20000.spi: dma_request_slave_channel_compat failed spi_sh_msiof e6e20000.spi: DMA not available, using PIO libphy: sh_mii: probed sh-eth ee700000.ethernet eth0: Base address at 0xee700000, 2e:09:0a:00:6d:00, IRQ 109. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:02.0: enabling device (0140 -> 0142) ehci-pci 0000:00:02.0: EHCI Host Controller ehci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:02.0: irq 120, io mem 0xee081000 ehci-pci 0000:00:02.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ehci-pci 0000:01:02.0: enabling device (0140 -> 0142) ehci-pci 0000:01:02.0: EHCI Host Controller ehci-pci 0000:01:02.0: new USB bus registered, assigned bus number 2 ehci-pci 0000:01:02.0: irq 121, io mem 0xee0c1000 ehci-pci 0000:01:02.0: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci 0000:00:01.0: enabling device (0140 -> 0142) ohci-pci 0000:00:01.0: OHCI PCI host controller ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 3 ohci-pci 0000:00:01.0: irq 120, io mem 0xee080000 ohci-pci 0000:00:01.0: init err (00002edf 0000) ohci-pci 0000:00:01.0: can't start ohci-pci 0000:00:01.0: startup error -75 ohci-pci 0000:00:01.0: USB bus 3 deregistered ohci-pci 0000:00:01.0: init 0000:00:01.0 fail, -75 ohci-pci: probe of 0000:00:01.0 failed with error -75 ohci-pci 0000:01:01.0: enabling device (0140 -> 0142) ohci-pci 0000:01:01.0: OHCI PCI host controller ohci-pci 0000:01:01.0: new USB bus registered, assigned bus number 3 ohci-pci 0000:01:01.0: irq 121, io mem 0xee0c0000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected sh-pfc e6060000.pfc: pin GP_7_23 already requested by ee090000.pci; cannot claim for e6590000.usb sh-pfc e6060000.pfc: pin-247 (e6590000.usb) status -22 sh-pfc e6060000.pfc: could not request pin 247 (GP_7_23) from group usb0 on device sh-pfc renesas_usbhs e6590000.usb: Error applying setting, reverse things back of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty renesas_usbhs e6590000.usb: gadget probed renesas_usbhs e6590000.usb: platform init failed. ata1: link resume succeeded after 1 retries Unable to handle kernel NULL pointer dereference at virtual address 0000000d pgd = c0004000 [0000000d] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc5-00129-gabd2dbf #959 Hardware name: Generic R8A7791 (Flattened Device Tree) task: ee84bb40 ti: ee84c000 task.ti: ee84c000 PC is at dma_release_channel+0x18/0xbc LR is at dma_release_channel+0x18/0xbc pc : [<c01e7fe8>] lr : [<c01e7fe8>] psr: 60000113 sp : ee84dd78 ip : ee84dd78 fp : ee84dd8c r10: c058f5d4 r9 : c05ce67c r8 : 00000024 r7 : ee303010 r6 : 00000000 r5 : ee303100 r4 : ffffffed r3 : 00000003 r2 : ee84dd60 r1 : 0002e30a r0 : c05f8e90 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5307d Table: 4000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee84c238) Stack: (0xee84dd78 to 0xee84e000) dd60: 00000000 ee303100 dd80: ee84ddb4 ee84dd90 c02d06c0 c01e7fdc 00000003 ee303010 ee949600 ffffffed dda0: ee949610 00000000 ee84dde4 ee84ddb8 c02cd524 c02d069c ee949618 00000004 ddc0: ee949610 ffffffed ee949610 c0605bd0 c0605bd0 c05c4c78 ee84de04 ee84dde8 dde0: c024b54c c02cd1a8 c024b4fc ee949610 00000000 00000000 ee84de24 ee84de08 de00: c024a010 c024b508 ee949610 ee949644 c0605bd0 00000000 ee84de44 ee84de28 de20: c024a1c4 c0249f4c c024a15c c0605bd0 ee84de48 c024a15c ee84de6c ee84de48 de40: c024895c c024a168 ee82db5c ee8f3834 c0605bd0 eeb31a00 c0600d78 00000000 de60: ee84de7c ee84de70 c024a2e0 c024890c ee84dea4 ee84de80 c02490ec c024a2cc de80: c056d039 ee84de90 c0605bd0 ee307300 00000000 c05c4c78 ee84debc ee84dea8 dea0: c024a9f0 c0249044 c05ab770 ee307300 ee84decc ee84dec0 c024bdb4 c024a958 dec0: ee84dedc ee84ded0 c05ab788 c024bd70 ee84df54 ee84dee0 c058fdc8 c05ab77c dee0: 60000153 ef7fcce1 ee84df0c ee84def8 c058f500 c01a9c94 c058f5d4 c056e1da df00: ee84df54 ee84df10 c003c47c c058f5e0 ef7fcce8 00000006 00000006 000000aa df20: c058c0e8 00000000 ee84df54 00000006 00000006 c05c54d0 c05c54b0 c06143c0 df40: 000000aa c05ce67c ee84df94 ee84df58 c058ff84 c058fccc 00000006 00000006 df60: c058f5d4 78f7f1ef ffffffff 00000000 c0469290 00000000 00000000 00000000 df80: 00000000 00000000 ee84dfac ee84df98 c04692a0 c058fe84 ee84c000 00000000 dfa0: 00000000 ee84dfb0 c000ebf8 c046929c 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9d5cdd68 bead4f78 Backtrace: [<c01e7fd0>] (dma_release_channel) from [<c02d06c0>] (usbhs_fifo_remove+0x30/0x60) r5:ee303100 r4:00000000 [<c02d0690>] (usbhs_fifo_remove) from [<c02cd524>] (usbhs_probe+0x388/0x3f0) r8:00000000 r7:ee949610 r6:ffffffed r5:ee949600 r4:ee303010 r3:00000003 [<c02cd19c>] (usbhs_probe) from [<c024b54c>] (platform_drv_probe+0x50/0x98) r8:c05c4c78 r7:c0605bd0 r6:c0605bd0 r5:ee949610 r4:ffffffed [<c024b4fc>] (platform_drv_probe) from [<c024a010>] (driver_probe_device+0xd0/0x21c) r6:00000000 r5:00000000 r4:ee949610 r3:c024b4fc [<c0249f40>] (driver_probe_device) from [<c024a1c4>] (__driver_attach+0x68/0x8c) r7:00000000 r6:c0605bd0 r5:ee949644 r4:ee949610 [<c024a15c>] (__driver_attach) from [<c024895c>] (bus_for_each_dev+0x5c/0x94) r6:c024a15c r5:ee84de48 r4:c0605bd0 r3:c024a15c [<c0248900>] (bus_for_each_dev) from [<c024a2e0>] (driver_attach+0x20/0x28) r7:00000000 r6:c0600d78 r5:eeb31a00 r4:c0605bd0 [<c024a2c0>] (driver_attach) from [<c02490ec>] (bus_add_driver+0xb4/0x1bc) [<c0249038>] (bus_add_driver) from [<c024a9f0>] (driver_register+0xa4/0xe8) r7:c05c4c78 r6:00000000 r5:ee307300 r4:c0605bd0 [<c024a94c>] (driver_register) from [<c024bdb4>] (__platform_driver_register+0x50/0x64) r5:ee307300 r4:c05ab770 [<c024bd64>] (__platform_driver_register) from [<c05ab788>] (renesas_usbhs_driver_init+0x18/0x20) [<c05ab770>] (renesas_usbhs_driver_init) from [<c058fdc8>] (do_one_initcall+0x108/0x1b8) [<c058fcc0>] (do_one_initcall) from [<c058ff84>] (kernel_init_freeable+0x10c/0x1d8) r9:c05ce67c r8:000000aa r7:c06143c0 r6:c05c54b0 r5:c05c54d0 r4:00000006 [<c058fe78>] (kernel_init_freeable) from [<c04692a0>] (kernel_init+0x10/0xec) r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0469290 r4:00000000 [<c0469290>] (kernel_init) from [<c000ebf8>] (ret_from_fork+0x14/0x3c) r4:00000000 r3:ee84c000 Code: e24cb004 e1a04000 e59f0094 eb0a1caa (e5943020) ---[ end trace c4f5636aa673cc02 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Lager ----- Starting kernel ... Booting Linux on physical CPU 0x0 Linux version 3.19.0-rc5-00129-gabd2dbf (horms@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.3 (GCC) ) #961 SMP Thu Jan 29 20:46:17 JST 2015 CPU: ARMv7 Processor [413fc0f2] revision 2 (ARMv7), cr=10c5307d CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache Machine model: Lager Ignoring memory block 0x140000000 - 0x200000000 debug: ignoring loglevel setting. Memory policy: Data cache writealloc On node 0 totalpages: 262144 free_area_init_node: node 0, pgdat c0612a80, node_mem_map eeff9000 Normal zone: 1520 pages used for memmap Normal zone: 0 pages reserved Normal zone: 194560 pages, LIFO batch:31 HighMem zone: 67584 pages, LIFO batch:15 PERCPU: Embedded 7 pages/cpu @eef9a000 s7552 r0 d21120 u32768 pcpu-alloc: s7552 r0 d21120 u32768 alloc=8*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624 Kernel command line: console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1032784K/1048576K available (4524K kernel code, 264K rwdata, 1128K rodata, 268K init, 191K bss, 15792K reserved, 0K cma-reserved, 270336K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) lowmem : 0xc0000000 - 0xef800000 ( 760 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) .text : 0xc0008000 - 0xc058e024 (5657 kB) .init : 0xc058f000 - 0xc05d2000 ( 268 kB) .data : 0xc05d2000 - 0xc06143a0 ( 265 kB) .bss : 0xc06143a0 - 0xc064407c ( 192 kB) Hierarchical RCU implementation. NR_IRQS:16 nr_irqs:16 16 Architected cp15 timer(s) running at 10.00MHz (virt). sched_clock: 56 bits at 10MHz, resolution 100ns, wraps every 3435973836800ns Switching to timer-based delay loop, resolution 100ns Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=100000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) CPU: Testing write buffer coherency: ok CPU0: update cpu_capacity 1535 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x40471350 - 0x404713a8 CPU1: update cpu_capacity 1535 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU2: update cpu_capacity 1535 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 CPU3: update cpu_capacity 1535 CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 CPU4: failed to boot: -22 CPU5: failed to boot: -22 CPU6: failed to boot: -22 CPU7: failed to boot: -22 Brought up 4 CPUs SMP: Total of 4 processors activated (80.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations renesas_irqc e61c0000.interrupt-controller: driving 4 irqs sh-pfc e6060000.pfc: r8a77900_pfc support registered No ATAGs? hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. platform regulator@1: Driver reg-fixed-voltage requests probe deferral platform regulator@3: Driver reg-fixed-voltage requests probe deferral gpio-regulator regulator@2: Could not obtain regulator setting GPIOs: -517 platform regulator@2: Driver gpio-regulator requests probe deferral gpio-regulator regulator@4: Could not obtain regulator setting GPIOs: -517 platform regulator@4: Driver gpio-regulator requests probe deferral vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb i2c-sh_mobile e6500000.i2c: I2C adapter 4, bus speed 100000 Hz i2c-sh_mobile e6510000.i2c: I2C adapter 5, bus speed 100000 Hz i2c-sh_mobile e6520000.i2c: I2C adapter 6, bus speed 100000 Hz i2c-sh_mobile e60b0000.i2c: I2C adapter 7, bus speed 100000 Hz media: Linux media interface: v0.10 Linux video capture interface: v2.00 sh_cmt ffca0000.timer: ch0: used for clock events sh_cmt ffca0000.timer: ch1: used as clock source Advanced Linux Sound Architecture Driver Initialized. Switched to clocksource arch_sys_counter NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 futex hash table entries: 2048 (order: 5, 131072 bytes) NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... bounce: pool size: 64 pages Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) gpio_rcar e6050000.gpio: driving 32 GPIOs gpio_rcar e6051000.gpio: driving 32 GPIOs gpio_rcar e6052000.gpio: driving 32 GPIOs gpio_rcar e6053000.gpio: driving 32 GPIOs gpio_rcar e6054000.gpio: driving 32 GPIOs gpio_rcar e6055000.gpio: driving 32 GPIOs pci-rcar-gen2 ee090000.pci: PCI: bus0 revision 11 pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0xee080000-0xee0810ff] pci_bus 0000:00: root bus resource [mem 0xee080000-0xee0810ff] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] pci 0000:00:00.0: [1033:0000] type 00 class 0x060000 pci 0000:00:00.0: reg 0x10: [mem 0xee090800-0xee090bff] pci 0000:00:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref] pci 0000:00:01.0: [1033:0035] type 00 class 0x0c0310 pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00000fff] pci 0000:00:01.0: supports D1 D2 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:02.0: [1033:00e0] type 00 class 0x0c0320 pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x000000ff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot PCI: bus0: Fast back to back transfers disabled pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 pci 0000:00:01.0: can't enable device: BAR 0 [mem 0x00000000-0x00000fff] not claimed pci 0000:00:01.0: Can't enable PCI device, BIOS handoff failed. pci 0000:00:02.0: can't enable device: BAR 0 [mem 0x00000000-0x000000ff] not claimed pci 0000:00:02.0: Can't enable PCI device, BIOS handoff failed. pci 0000:00:01.0: BAR 0: assigned [mem 0xee080000-0xee080fff] pci 0000:00:02.0: BAR 0: assigned [mem 0xee081000-0xee0810ff] pci-rcar-gen2 ee0b0000.pci: PCI: bus0 revision 11 pci-rcar-gen2 ee0b0000.pci: PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [io 0xee0a0000-0xee0a10ff] pci_bus 0000:01: root bus resource [mem 0xee0a0000-0xee0a10ff] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff] pci 0000:01:00.0: [1033:0000] type 00 class 0x060000 pci 0000:01:00.0: reg 0x10: [mem 0xee0b0800-0xee0b0bff] pci 0000:01:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref] pci 0000:01:01.0: [1033:0035] type 00 class 0x0c0310 pci 0000:01:01.0: reg 0x10: [mem 0x00000000-0x00000fff] pci 0000:01:01.0: supports D1 D2 pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot pci 0000:01:02.0: [1033:00e0] type 00 class 0x0c0320 pci 0000:01:02.0: reg 0x10: [mem 0x00000000-0x000000ff] pci 0000:01:02.0: supports D1 D2 pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot PCI: bus1: Fast back to back transfers disabled pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 pci 0000:01:01.0: can't enable device: BAR 0 [mem 0x00000000-0x00000fff] not claimed pci 0000:01:01.0: Can't enable PCI device, BIOS handoff failed. pci 0000:01:02.0: can't enable device: BAR 0 [mem 0x00000000-0x000000ff] not claimed pci 0000:01:02.0: Can't enable PCI device, BIOS handoff failed. pci 0000:01:01.0: BAR 0: assigned [mem 0xee0a0000-0xee0a0fff] pci 0000:01:02.0: BAR 0: assigned [mem 0xee0a1000-0xee0a10ff] pci-rcar-gen2 ee0d0000.pci: PCI: bus0 revision 11 pci-rcar-gen2 ee0d0000.pci: PCI host bridge to bus 0000:02 pci_bus 0000:02: root bus resource [io 0xee0c0000-0xee0c10ff] pci_bus 0000:02: root bus resource [mem 0xee0c0000-0xee0c10ff] pci_bus 0000:02: No busn resource found for root bus, will use [bus 02-ff] pci 0000:02:00.0: [1033:0000] type 00 class 0x060000 pci 0000:02:00.0: reg 0x10: [mem 0xee0d0800-0xee0d0bff] pci 0000:02:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref] pci 0000:02:01.0: [1033:0035] type 00 class 0x0c0310 pci 0000:02:01.0: reg 0x10: [mem 0x00000000-0x00000fff] pci 0000:02:01.0: supports D1 D2 pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot pci 0000:02:02.0: [1033:00e0] type 00 class 0x0c0320 pci 0000:02:02.0: reg 0x10: [mem 0x00000000-0x000000ff] pci 0000:02:02.0: supports D1 D2 pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot PCI: bus2: Fast back to back transfers disabled pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 pci 0000:02:01.0: can't enable device: BAR 0 [mem 0x00000000-0x00000fff] not claimed pci 0000:02:01.0: Can't enable PCI device, BIOS handoff failed. pci 0000:02:02.0: can't enable device: BAR 0 [mem 0x00000000-0x000000ff] not claimed pci 0000:02:02.0: Can't enable PCI device, BIOS handoff failed. pci 0000:02:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff] pci 0000:02:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled SuperH (H)SCI(F) driver initialized e6c40000.serial: ttySC6 at MMIO 0xe6c40000 (irq = 101, base_baud = 0) is a scifa console [ttySC6] enabled e6c50000.serial: ttySC7 at MMIO 0xe6c50000 (irq = 102, base_baud = 0) is a scifa [drm] Initialized drm 1.1.0 20060810 rcar-du feb00000.display: fb0: frame buffer device rcar-du feb00000.display: registered panic notifier [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. [drm] Initialized rcar-du 1.0.0 20130110 on minor 0 scsi host0: sata_rcar ata1: SATA max UDMA/133 irq 104 renesas_spi e6b10000.spi: dma_request_slave_channel_compat failed renesas_spi e6b10000.spi: DMA not available, using PIO m25p80 spi0.0: s25fl512s (65536 Kbytes) 3 ofpart partitions found on MTD device spi0.0 Creating 3 MTD partitions on "spi0.0": 0x000000000000-0x000000040000 : "loader" 0x000000040000-0x000000440000 : "user" 0x000000440000-0x000004000000 : "flash" renesas_spi e6b10000.spi: probed spi_sh_msiof e6e10000.spi: dma_request_slave_channel_compat failed spi_sh_msiof e6e10000.spi: DMA not available, using PIO libphy: sh_mii: probed sh-eth ee700000.ethernet eth0: Base address at 0xee700000, 2e:09:0a:00:6e:71, IRQ 103. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:02.0: enabling device (0140 -> 0142) ehci-pci 0000:00:02.0: EHCI Host Controller ehci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:02.0: irq 117, io mem 0xee081000 ehci-pci 0000:00:02.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ehci-pci 0000:01:02.0: enabling device (0140 -> 0142) ehci-pci 0000:01:02.0: EHCI Host Controller ehci-pci 0000:01:02.0: new USB bus registered, assigned bus number 2 ehci-pci 0000:01:02.0: irq 118, io mem 0xee0a1000 ehci-pci 0000:01:02.0: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected ehci-pci 0000:02:02.0: enabling device (0140 -> 0142) ehci-pci 0000:02:02.0: EHCI Host Controller ehci-pci 0000:02:02.0: new USB bus registered, assigned bus number 3 ehci-pci 0000:02:02.0: irq 119, io mem 0xee0c1000 ehci-pci 0000:02:02.0: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver ohci-pci 0000:00:01.0: enabling device (0140 -> 0142) ohci-pci 0000:00:01.0: OHCI PCI host controller ohci-pci 0000:00:01.0: new USB bus registered, assigned bus number 4 ohci-pci 0000:00:01.0: irq 117, io mem 0xee080000 ohci-pci 0000:00:01.0: init err (00002edf 0000) ohci-pci 0000:00:01.0: can't start ohci-pci 0000:00:01.0: startup error -75 ohci-pci 0000:00:01.0: USB bus 4 deregistered ohci-pci 0000:00:01.0: init 0000:00:01.0 fail, -75 ohci-pci: probe of 0000:00:01.0 failed with error -75 ohci-pci 0000:01:01.0: enabling device (0140 -> 0142) ohci-pci 0000:01:01.0: OHCI PCI host controller ohci-pci 0000:01:01.0: new USB bus registered, assigned bus number 4 ohci-pci 0000:01:01.0: irq 118, io mem 0xee0a0000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 1 port detected ohci-pci 0000:02:01.0: enabling device (0140 -> 0142) ata1: link resume succeeded after 1 retries ohci-pci 0000:02:01.0: OHCI PCI host controller ohci-pci 0000:02:01.0: new USB bus registered, assigned bus number 5 ohci-pci 0000:02:01.0: irq 119, io mem 0xee0c0000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 1 port detected sh-pfc e6060000.pfc: pin GP_5_19 already requested by ee090000.pci; cannot claim for e6590000.usb ata1: SATA link down (SStatus 0 SControl 300) sh-pfc e6060000.pfc: pin-179 (e6590000.usb) status -22 sh-pfc e6060000.pfc: could not request pin 179 (GP_5_19) from group usb0_ovc_vbus on device sh-pfc renesas_usbhs e6590000.usb: Error applying setting, reverse things back of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty of_dma_request_slave_channel: dma-names property of node '/usb@e6590000' missing or empty renesas_usbhs e6590000.usb: gadget probed renesas_usbhs e6590000.usb: platform init failed. Unable to handle kernel NULL pointer dereference at virtual address 0000000d pgd = c0004000 [0000000d] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.19.0-rc5-00129-gabd2dbf #961 Hardware name: lager task: ee84bb40 ti: ee84c000 task.ti: ee84c000 PC is at dma_release_channel+0x18/0xbc LR is at dma_release_channel+0x18/0xbc pc : [<c01e7fe8>] lr : [<c01e7fe8>] psr: 60000113 sp : ee84dd78 ip : ee84dd78 fp : ee84dd8c r10: c058f5d4 r9 : c05ce67c r8 : 00000024 r7 : edfec010 r6 : 00000000 r5 : edfec100 r4 : ffffffed r3 : 00000003 r2 : ee84dd60 r1 : 0002dfe4 r0 : c05f8e90 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5307d Table: 4000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee84c238) Stack: (0xee84dd78 to 0xee84e000) dd60: 00000000 edfec100 dd80: ee84ddb4 ee84dd90 c02d06c0 c01e7fdc 00000003 edfec010 eea78e00 ffffffed dda0: eea78e10 00000000 ee84dde4 ee84ddb8 c02cd524 c02d069c eea78e18 00000004 ddc0: eea78e10 ffffffed eea78e10 c0605bd0 c0605bd0 c05c4c78 ee84de04 ee84dde8 dde0: c024b54c c02cd1a8 c024b4fc eea78e10 00000000 00000000 ee84de24 ee84de08 de00: c024a010 c024b508 eea78e10 eea78e44 c0605bd0 00000000 ee84de44 ee84de28 de20: c024a1c4 c0249f4c c024a15c c0605bd0 ee84de48 c024a15c ee84de6c ee84de48 de40: c024895c c024a168 ee82d15c eea37f34 c0605bd0 ee153f00 c0600d78 00000000 de60: ee84de7c ee84de70 c024a2e0 c024890c ee84dea4 ee84de80 c02490ec c024a2cc de80: c056d039 ee84de90 c0605bd0 edfe9240 00000000 c05c4c78 ee84debc ee84dea8 dea0: c024a9f0 c0249044 c05ab770 edfe9240 ee84decc ee84dec0 c024bdb4 c024a958 dec0: ee84dedc ee84ded0 c05ab788 c024bd70 ee84df54 ee84dee0 c058fdc8 c05ab77c dee0: 60000113 ef7fccf7 ee84df0c ee84def8 c058f500 c01a9c94 c058f5d4 c056e1da df00: ee84df54 ee84df10 c003c47c c058f5e0 ef7fccfe 00000006 00000006 000000aa df20: c058c0e8 00000000 ee84df54 00000006 00000006 c05c54d0 c05c54b0 c06143c0 df40: 000000aa c05ce67c ee84df94 ee84df58 c058ff84 c058fccc 00000006 00000006 df60: c058f5d4 00041164 ffffffff 00000000 c0469290 00000000 00000000 00000000 df80: 00000000 00000000 ee84dfac ee84df98 c04692a0 c058fe84 ee84c000 00000000 dfa0: 00000000 ee84dfb0 c000ebf8 c046929c 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 5303c810 7110f809 Backtrace: [<c01e7fd0>] (dma_release_channel) from [<c02d06c0>] (usbhs_fifo_remove+0x30/0x60) r5:edfec100 r4:00000000 [<c02d0690>] (usbhs_fifo_remove) from [<c02cd524>] (usbhs_probe+0x388/0x3f0) r8:00000000 r7:eea78e10 r6:ffffffed r5:eea78e00 r4:edfec010 r3:00000003 [<c02cd19c>] (usbhs_probe) from [<c024b54c>] (platform_drv_probe+0x50/0x98) r8:c05c4c78 r7:c0605bd0 r6:c0605bd0 r5:eea78e10 r4:ffffffed [<c024b4fc>] (platform_drv_probe) from [<c024a010>] (driver_probe_device+0xd0/0x21c) r6:00000000 r5:00000000 r4:eea78e10 r3:c024b4fc [<c0249f40>] (driver_probe_device) from [<c024a1c4>] (__driver_attach+0x68/0x8c) r7:00000000 r6:c0605bd0 r5:eea78e44 r4:eea78e10 [<c024a15c>] (__driver_attach) from [<c024895c>] (bus_for_each_dev+0x5c/0x94) r6:c024a15c r5:ee84de48 r4:c0605bd0 r3:c024a15c [<c0248900>] (bus_for_each_dev) from [<c024a2e0>] (driver_attach+0x20/0x28) r7:00000000 r6:c0600d78 r5:ee153f00 r4:c0605bd0 [<c024a2c0>] (driver_attach) from [<c02490ec>] (bus_add_driver+0xb4/0x1bc) [<c0249038>] (bus_add_driver) from [<c024a9f0>] (driver_register+0xa4/0xe8) r7:c05c4c78 r6:00000000 r5:edfe9240 r4:c0605bd0 [<c024a94c>] (driver_register) from [<c024bdb4>] (__platform_driver_register+0x50/0x64) r5:edfe9240 r4:c05ab770 [<c024bd64>] (__platform_driver_register) from [<c05ab788>] (renesas_usbhs_driver_init+0x18/0x20) [<c05ab770>] (renesas_usbhs_driver_init) from [<c058fdc8>] (do_one_initcall+0x108/0x1b8) [<c058fcc0>] (do_one_initcall) from [<c058ff84>] (kernel_init_freeable+0x10c/0x1d8) r9:c05ce67c r8:000000aa r7:c06143c0 r6:c05c54b0 r5:c05c54d0 r4:00000006 [<c058fe78>] (kernel_init_freeable) from [<c04692a0>] (kernel_init+0x10/0xec) r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0469290 r4:00000000 [<c0469290>] (kernel_init) from [<c000ebf8>] (ret_from_fork+0x14/0x3c) r4:00000000 r3:ee84c000 Code: e24cb004 e1a04000 e59f0094 eb0a1caa (e5943020) ---[ end trace 06a71daccda9eecb ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b CPU2: stopping CPU: 2 PID: 0 Comm: swapper/2 Tainted: G D 3.19.0-rc5-00129-gabd2dbf #961 Hardware name: lager Backtrace: [<c0011854>] (dump_backtrace) from [<c00119f4>] (show_stack+0x18/0x1c) r6:c05da90c r5:00000002 r4:00000000 r3:00200040 [<c00119dc>] (show_stack) from [<c046ca18>] (dump_stack+0x74/0x90) [<c046c9a4>] (dump_stack) from [<c0014244>] (handle_IPI+0xcc/0x164) r4:c06147ac r3:c05e830c [<c0014178>] (handle_IPI) from [<c00093a8>] (gic_handle_irq+0x5c/0x64) r5:ee86df78 r4:f0002000 [<c000934c>] (gic_handle_irq) from [<c00125c0>] (__irq_svc+0x40/0x54) Exception stack(0xee86df78 to 0xee86dfc0) df60: 00000000 00000000 df80: ee86dfd0 c001d980 c06141f0 c05da4f0 c0474304 c06147d4 4000406a 413fc0f2 dfa0: 00000000 ee86dfcc ee86dfd0 ee86dfc0 c000f6d4 c000f6d8 60000113 ffffffff r6:ffffffff r5:60000113 r4:c000f6d8 r3:c000f6d4 [<c000f6a4>] (arch_cpu_idle) from [<c005186c>] (cpu_startup_entry+0xf4/0x170) [<c0051778>] (cpu_startup_entry) from [<c0013efc>] (secondary_start_kernel+0x114/0x130) [<c0013de8>] (secondary_start_kernel) from [<40009444>] (0x40009444) r4:6e85006a r3:c000942c CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.19.0-rc5-00129-gabd2dbf #961 Hardware name: lager Backtrace: [<c0011854>] (dump_backtrace) from [<c00119f4>] (show_stack+0x18/0x1c) r6:c05da90c r5:00000000 r4:00000000 r3:00200000 [<c00119dc>] (show_stack) from [<c046ca18>] (dump_stack+0x74/0x90) [<c046c9a4>] (dump_stack) from [<c0014244>] (handle_IPI+0xcc/0x164) r4:c06147ac r3:c05e830c [<c0014178>] (handle_IPI) from [<c00093a8>] (gic_handle_irq+0x5c/0x64) r5:c05d3f40 r4:f0002000 [<c000934c>] (gic_handle_irq) from [<c00125c0>] (__irq_svc+0x40/0x54) Exception stack(0xc05d3f40 to 0xc05d3f88) 3f40: 00000000 00000000 c05d3f98 c001d980 c06141f0 c05da4f0 c0474304 c06143c0 3f60: c05c56a8 413fc0f2 ef7fcc80 c05d3f94 c05d3f98 c05d3f88 c000f6d4 c000f6d8 3f80: 60000113 ffffffff r6:ffffffff r5:60000113 r4:c000f6d8 r3:c000f6d4 [<c000f6a4>] (arch_cpu_idle) from [<c005186c>] (cpu_startup_entry+0xf4/0x170) [<c0051778>] (cpu_startup_entry) from [<c0469278>] (rest_init+0x68/0x80) [<c0469210>] (rest_init) from [<c058fc54>] (start_kernel+0x34c/0x3b8) [<c058f908>] (start_kernel) from [<40008074>] (0x40008074) r10:00000000 r8:4000406a r7:c05de5cc r6:c05c56a4 r5:c05da47c r4:c0614754 CPU3: stopping CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D 3.19.0-rc5-00129-gabd2dbf #961 Hardware name: lager Backtrace: [<c0011854>] (dump_backtrace) from [<c00119f4>] (show_stack+0x18/0x1c) r6:c05da90c r5:00000003 r4:00000000 r3:00200040 [<c00119dc>] (show_stack) from [<c046ca18>] (dump_stack+0x74/0x90) [<c046c9a4>] (dump_stack) from [<c0014244>] (handle_IPI+0xcc/0x164) r4:c06147ac r3:c05e830c [<c0014178>] (handle_IPI) from [<c00093a8>] (gic_handle_irq+0x5c/0x64) r5:ee86ff78 r4:f0002000 [<c000934c>] (gic_handle_irq) from [<c00125c0>] (__irq_svc+0x40/0x54) Exception stack(0xee86ff78 to 0xee86ffc0) ff60: 00000000 00000000 ff80: ee86ffd0 c001d980 c06141f0 c05da4f0 c0474304 c06147d4 4000406a 413fc0f2 ffa0: 00000000 ee86ffcc ee86ffd0 ee86ffc0 c000f6d4 c000f6d8 60000113 ffffffff r6:ffffffff r5:60000113 r4:c000f6d8 r3:c000f6d4 [<c000f6a4>] (arch_cpu_idle) from [<c005186c>] (cpu_startup_entry+0xf4/0x170) [<c0051778>] (cpu_startup_entry) from [<c0013efc>] (secondary_start_kernel+0x114/0x130) [<c0013de8>] (secondary_start_kernel) from [<40009444>] (0x40009444) r4:6e85006a r3:c000942c drm_kms_helper: panic occurred, switching back to text console ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html