Re: [PATCH 6/8] usb: dwc3: add ULPI interface support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 27, 2015 at 01:09:25PM +0200, Heikki Krogerus wrote:
> > look at your patch again. In case DWC3_ULPI isn't enabled, this file
> > won't be linked at all. You're using stubs, so taht's fine.
> > 
> > In case it _is_ enabled, you're breaking out early if you can't register
> > ulpi interface, meaning you're exitting probe() (which, in fact, seems
> > wrong as I want to be able to run dwc3 with ULPI enabled on a platform
> > that was configured with ULPI+UTMI, but uses UTMI PHY).
> > 
> > I still think this patch won't work in all cases.
> 
> OK. So in case of ULPI+UTMI we'll try the ulpi interface, and if it
> fails, fall back to UTMI. Or can we use some other method to determine
> to which interface the PHY is really attached to in that case?

I think we would need a phy_interface_sel pdata/DT binding for those
cases. It should be optional and probably only needed for a few odd
devices.

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux