Hello.
On 01/19/2015 01:24 AM, Sergei Shtylyov wrote:
Here's a set of 23 patches against the 'usb-next' branch of Greg KH's
'usb.git' repo plus 2 FHCI patches I posted a week ago. It's to replace the
use of the hex numbers where the USB_CHAR_* #define's should have been used.
[01/23] ehci-hub: use HUB_CHAR_*
[02/23] fhci-hub: use HUB_CHAR_*
[03/23] fotg210-hcd: use HUB_CHAR_*
[04/23] fusbh200-hcd: use HUB_CHAR_*
[05/23] imx21-hcd: use HUB_CHAR_*
[06/23] isp116x-hcd: use HUB_CHAR_*
[07/23] isp1362-hcd: use HUB_CHAR_*
[08/23] isp1760-hcd: use HUB_CHAR_*
[09/23] max3421-hcd: use HUB_CHAR_*
[10/23] ohci-at91: use HUB_CHAR_*
[11/23] ohci-hub: use HUB_CHAR_*
[12/23] ohci-s3c2410: use HUB_CHAR_*
[13/23] oxu210hp-hcd: use HUB_CHAR_*
[14/23] r8a66597-hcd: use HUB_CHAR_*
[15/23] sl811-hcd: use HUB_CHAR_*
[16/23] u132-hcd: use HUB_CHAR_*
[17/23] uhci-hub: use HUB_CHAR_*
[18/23] dwc2: hcd: use HUB_CHAR_*
[19/23] dummy_hcd: use HUB_CHAR_*
[20/23] musb_virthub: use HUB_CHAR_*
[21/23] renesas_usbhs: mod_host: use HUB_CHAR_*
[22/23] usbip: vhci_hcd: use HUB_CHAR_*
[23/23] wusbcore: rh: use HUB_CHAR_*
I've just discovered that I missed c67x00 in this patchset, probably due
to the value and the comments there differing...
From the code it follows that most probably both are wrong: no power
switching is supported (the value claims the common power switching) and
nothing happens with the hardware about the over-current (the value claims
common protection, while the comment says it's per port). Peter, any comments?
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
