> From: Antti Seppälä [mailto:a.seppala@xxxxxxxxx] > Sent: Wednesday, January 21, 2015 10:28 AM > > This patch switches calls to readl/writel to their > __raw_readl/__raw_writel equivalents which preserve platform endianness. > > This patch is necessary to access dwc2 registers correctly on big endian > systems such as mips. Then dwc2 can be used to replace ifx-hcd driver > for lantiq platform found e.g. in OpenWrt. > > The patch was autogenerated with the following commands: > sed -i "s/\<readl\>/__raw_readl/g" *.c hcd.h hw.h > sed -i "s/\<writel\>/__raw_writel/g" *.c hcd.h hw.h > > Some files were then hand-edited to fix checkpatch.pl warning about > too long lines. > > Signed-off-by: Antti Seppälä <a.seppala@xxxxxxxxx> > Signed-off-by: Vincent Pelletier <plr.vincent@xxxxxxxxx> > --- Having the __raw functions everywhere is not pretty and probably not a good idea either. I would rather have a dwc2_writel/dwc2_readl (like in dwc3), and we can figure out what needs to happen in there to support your platform. As for readl/writel or the __raw equivalents, I am not sure. I haven't run the in-kernel driver on a big endian system so I don't know what the issue is. But I suspect there may be consequences to other platforms if we simply change this to __raw_readl/__raw_writel. Does anyone have feedback on this? Thanks, John ��.n��������+%������w��{.n�����{���)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
