Re: [PATCH v3 2/2] mfd: dln2: add suspend/resume functionality

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 19 Jan 2015, Octavian Purdila wrote:

> Without suspend/resume functionality in the USB driver the USB core
> will disconnect and reconnect the DLN2 port and because the GPIO
> framework does not yet support removal of an in-use controller a
> suspend/resume operation will result in a crash.
> 
> This patch provides suspend and resume functions for the DLN2 driver
> so that the above scenario is avoided, if the host controller does not
> drop VBUS during suspend, since in this case the device state is
> preserved.
> 
> We chose not implemented reset_resume so that if the host controller
> does drop VBUS the resume path will go through above the
> disconnect/reconnect process since it is probably better to fix the
> GPIO framework disconnect issue then to save and restore the device
> state for every driver.
> 
> Signed-off-by: Octavian Purdila <octavian.purdila@xxxxxxxxx>
> Reviewed-by: Johan Hovold <johan@xxxxxxxxxx>

With Johan's Ack, I'm fairly sure I can just apply this without an in
depth review from me.

After a quick glance; applied, thanks.

> ---
>  drivers/mfd/dln2.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c
> index 8311820..1be9bd1 100644
> --- a/drivers/mfd/dln2.c
> +++ b/drivers/mfd/dln2.c
> @@ -791,6 +791,24 @@ out_free:
>  	return ret;
>  }
>  
> +static int dln2_suspend(struct usb_interface *iface, pm_message_t message)
> +{
> +	struct dln2_dev *dln2 = usb_get_intfdata(iface);
> +
> +	dln2_stop(dln2);
> +
> +	return 0;
> +}
> +
> +static int dln2_resume(struct usb_interface *iface)
> +{
> +	struct dln2_dev *dln2 = usb_get_intfdata(iface);
> +
> +	dln2->disconnect = false;
> +
> +	return dln2_start_rx_urbs(dln2, GFP_NOIO);
> +}
> +
>  static const struct usb_device_id dln2_table[] = {
>  	{ USB_DEVICE(0xa257, 0x2013) },
>  	{ }
> @@ -803,6 +821,8 @@ static struct usb_driver dln2_driver = {
>  	.probe = dln2_probe,
>  	.disconnect = dln2_disconnect,
>  	.id_table = dln2_table,
> +	.suspend = dln2_suspend,
> +	.resume = dln2_resume,
>  };
>  
>  module_usb_driver(dln2_driver);

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux