On Fri, 16 Jan 2015, Mathias Nyman wrote: > also usbmon traces can be helpful, at least for others, I'm myself horribly slow at deciphering those Attached is my usbmon "cheat sheet". It's a big help in deciphering common control transfers. I wrote it before USB-3 came out, and I never included the USB-3 hub commands and status bits. If you feel like adding those on to the cheat sheet, please post the final result. Alan Stern
Standard device requests RQtype Req Value Index Length ---------------------------------------------- 0 1 dev-feat 0 0 Clear device feature 0 3 dev-feat 0 0 Set device feature 0 5 address 0 0 Set device address 0 9 config-value 0 0 Set configuration 1 b altsetting intf 0 Set interface 1 1 intf-feat intf 0 Clear interface feature 1 3 intf-feat intf 0 Set interface feature 2 1 ep-feat ep 0 Clear endpoint feature 2 3 ep-feat ep 0 Set endpoint feature 80 0 0 0 2 Get device status 80 6 descr-type/ 0/ len Get descriptor index lang-ID 80 8 0 0 1 Get configuration 81 0 0 intf 2 Get interface status 81 a 0 intf 1 Get interface (altsetting) 82 0 0 ep 2 Get endpoint status Device features: 0 = self-powered, 1 = remote wakeup Interface features: None Endpoint features: 0 = halt Descriptor types: 1 = device, 2 = config, 3 = string, (4 = interface, 5 = endpoint), 6 = device qualifier, 7 = other-speed config Hub class requests RQtype Req Value Index Length ---------------------------------------------- 20 1 hub-feat 0 0 Clear hub feature 20 3 hub-feat 0 0 Set hub feature 23 1 port-feat sel/ 0 Clear port feature port 23 3 port-feat sel/ 0 Set port feature port a0 0 0 0 4 Get hub status a0 6 2900 0 len Get hub descriptor a3 0 0 port 4 Get port status Hub features: 0 = hub local power, 1 = hub over current, 10 = ch hub local power, 11 = ch hub over current Port features: 0 = connect, 1 = enable, 2 = suspend, 3 = over current, 4 = reset, 8 = power, 9 = low speed, a = high speed, b = test mode, c = indicator, 10 = ch connect, 11 = ch enable, 12 = ch suspend, 13 = ch over current, 14 = ch reset Selector is used for port indicators HID class requests RQtype Req Value Index Length ---------------------------------------------- 21 9 report-type/ID intf len Set report 21 a duration/ID intf 0 Set idle 21 b proto intf 0 Set protocol 81 6 descr-type/set intf len Get class descriptor a1 1 report-type/ID intf len Get report a1 2 0/ID intf 1 Get idle a1 3 0 intf 1 Get protocol Report type: 1 = input, 2 = output, 3 = feature Descriptor type: 21 = HID, 22 = Report, 23 = Physical Protocol: 0 = boot, 1 = report
