hsotg->phyif is set in dwc2_gadget_init according to phy interface
width. Use it for configuration instead of hardcoded value.
Moreover, set USB turnaround time according to phy width.
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@xxxxxxxxx>
---
drivers/usb/dwc2/gadget.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 6ce546a..2a84ec5 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2289,8 +2289,9 @@ void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
*/
/* set the PLL on, remove the HNP/SRP and set the PHY */
+ val = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
- (0x5 << 10), hsotg->regs + GUSBCFG);
+ (val << 10), hsotg->regs + GUSBCFG);
s3c_hsotg_init_fifo(hsotg);
@@ -2973,6 +2974,7 @@ static void s3c_hsotg_phy_disable(struct dwc2_hsotg *hsotg)
*/
static void s3c_hsotg_init(struct dwc2_hsotg *hsotg)
{
+ u32 trdtim;
/* unmask subset of endpoint interrupts */
writel(DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
@@ -2997,8 +2999,10 @@ static void s3c_hsotg_init(struct dwc2_hsotg *hsotg)
s3c_hsotg_init_fifo(hsotg);
/* set the PLL on, remove the HNP/SRP and set the PHY */
- writel(GUSBCFG_PHYIF16 | GUSBCFG_TOUTCAL(7) | (0x5 << 10),
- hsotg->regs + GUSBCFG);
+ trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
+ writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
+ (trdtim << 10),
+ hsotg->regs + GUSBCFG);
if (using_dma(hsotg))
__orr32(hsotg->regs + GAHBCFG, GAHBCFG_DMA_EN);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
