Hi, > -----Original Message----- > From: Dinh Nguyen [mailto:dinguyen@xxxxxxxxxxxxxxxxxxxxx] > Sent: Wednesday, January 7, 2015 1:01 AM > To: Paul Zimmerman; Kaukab, Yousaf; linux-usb@xxxxxxxxxxxxxxx; balbi@xxxxxx > Cc: Herrero, Gregory; sergei.shtylyov@xxxxxxxxxxxxxxxxxx; > r.baldyga@xxxxxxxxxxx > Subject: Re: [PATCH v2 00/30] usb: updates for dwc2 gadget driver > > On 01/06/2015 05:47 PM, Dinh Nguyen wrote: > > On 01/05/2015 01:16 PM, Paul Zimmerman wrote: > >> Adding Dinh to CC. > >> > >> Robert, Dinh, I would like to have your tested-bys for this series, please. > >> > > > > This patch series is producing this error on the SOCFPGA platform. > > I'll try to bisect to a specific patch. > > > > root@socfpga_cyclone5:~# [ 47.929743] dwc2 ffb40000.usb: new device is > > low-speed > > [ 63.873596] dwc2 ffb40000.usb: new device is low-speed > > [ 64.219220] dwc2 ffb40000.usb: new device is low-speed > > [ 64.421495] dwc2 ffb40000.usb: new device is low-speed > > [ 64.834505] dwc2 ffb40000.usb: new device is high-speed > > [ 69.899695] ------------[ cut here ]------------ > > [ 69.904315] WARNING: CPU: 0 PID: 0 at drivers/usb/dwc2/gadget.c:1352 > > s3c_hsotg_rx_data+0xc0/0xd4() > > [ 69.913230] Modules linked in: g_mass_storage usb_f_mass_storage > > libcomposite > > [ 69.920385] CPU: 0 PID: 0 Comm: swapper/0 Not tainted > > 3.19.0-rc1-00090-g4864f14 #4 > > [ 69.927917] Hardware name: Altera SOCFPGA > > [ 69.931936] [<c0014d24>] (unwind_backtrace) from [<c001173c>] > > (show_stack+0x10/0x14) > > [ 69.939654] [<c001173c>] (show_stack) from [<c0461c74>] > > (dump_stack+0x74/0x90) > > [ 69.946857] [<c0461c74>] (dump_stack) from [<c0021138>] > > (warn_slowpath_common+0x78/0xb4) > > [ 69.954916] [<c0021138>] (warn_slowpath_common) from [<c0021190>] > > (warn_slowpath_null+0x1c/0x24) > > [ 69.963669] [<c0021190>] (warn_slowpath_null) from [<c030278c>] > > (s3c_hsotg_rx_data+0xc0/0xd4) > > [ 69.972162] [<c030278c>] (s3c_hsotg_rx_data) from [<c0304ac0>] > > (s3c_hsotg_irq+0x454/0x520) > > [ 69.980394] [<c0304ac0>] (s3c_hsotg_irq) from [<c0058c3c>] > > (handle_irq_event_percpu+0x5c/0x1f4) > > [ 69.989056] [<c0058c3c>] (handle_irq_event_percpu) from [<c0058e18>] > > (handle_irq_event+0x44/0x64) > > [ 69.997892] [<c0058e18>] (handle_irq_event) from [<c005b8d8>] > > (handle_fasteoi_irq+0xa8/0x180) > > [ 70.006382] [<c005b8d8>] (handle_fasteoi_irq) from [<c005856c>] > > (generic_handle_irq+0x20/0x30) > > [ 70.014958] [<c005856c>] (generic_handle_irq) from [<c0058668>] > > (__handle_domain_irq+0x54/0xb4) > > [ 70.023619] [<c0058668>] (__handle_domain_irq) from [<c0008638>] > > (gic_handle_irq+0x20/0x5c) > > [ 70.031937] [<c0008638>] (gic_handle_irq) from [<c0012240>] > > (__irq_svc+0x40/0x54) > > [ 70.039384] Exception stack(0xc0635f60 to 0xc0635fa8) > > [ 70.044415] 5f60: 00000000 00000000 c0635fb0 c001cee0 c066cca0 > > c063c498 c046908c c066c4b2 > > [ 70.052556] 5f80: c066cca0 00000001 ef7fccc0 00000000 01000000 > > c0635fa8 c000f0fc c000f100 > > [ 70.060694] 5fa0: 600f0013 ffffffff > > [ 70.064174] [<c0012240>] (__irq_svc) from [<c000f100>] > > (arch_cpu_idle+0x30/0x3c) > > [ 70.071545] [<c000f100>] (arch_cpu_idle) from [<c0050364>] > > (cpu_startup_entry+0x138/0x224) > > [ 70.079783] [<c0050364>] (cpu_startup_entry) from [<c05ebbb0>] > > (start_kernel+0x304/0x35c) > > [ 70.087921] ---[ end trace 66b76f6dcbbda3bf ]--- > > [ 79.911589] dwc2 ffb40000.usb: new device is low-speed > > > > Dinh > > > > It looks like this patch is producing the above error. > > usb: dwc2: gadget: manage ep0 state in software > > Manage ep0 state in software to add handling of status OUT stage. > Just toggling hsotg->setup in s3c_hsotg_handle_outdone leaves it in > wrong state in 2-stage control transfers. > Moreover, don't call s3c_hsotg_handle_outdone both from SetupDone and > OutDone. Only use one of them, as for a setup packet we get both. > > Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@xxxxxxxxx> Thank you for testing this patchset. I have tested g_mass_storage without dma in my setup and it is working fine. As I don't see this problem, I need some help in figuring out what's going on. Would it be possible for you to provide me following? 1) Console output after enabling CONFIG_USB_DWC2_DEBUG 2) Function trace echo s3c_* > /sys/kernel/debug/tracing/set_ftrace_filter echo function > /sys/kernel/debug/tracing/current_tracer 3) Values of following registers GSNPSID, GHWCFG1-GHWCFG4 > > Dinh BR, Yousaf -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
